I actually played around with the switch and it started working. Weird. Thanks for the help anyway.
Does anybody else think it will be a matter of time before Razer scraps Sanwa and starts using imitation parts instead?
I have a feeling they may look into using the HBFS design, but instead using MX switches, they will use cheap ass Kailh switches.
That could be a mistake on their part, Razer isnât known for quality, reliable parts.
They are known for breaking or failing quickly.
They probably go with Cheap-ass Qanba parts
Theyâre already shooting themselves in foot by making their console peripherals exclusive to the Xbox brand, so I wouldnât put it past them to start âcutting costsâ with their arcade sticks.
Though it would hurt them bad if they did that, since theyâre sponsoring pro players and providing them sticks.
I did talked to a former Pro DOA2 player who was sponsored by Razer.
He gets new gear every 3 months (or less), so he himself never notices the stuff break down.
He honestly didnât know Razer products will break after 3 months, as he asked to exchange gear with Razer every 3 months.
As it was new gear he got provided he never really complained or question what was going on.
Then again they were paying him to play games for a living.
Razerâs excuse why they never made anything for the PlayStation is pretty weak too.
It was something like Oh we only make products we use our selves and our CEO mostly game on the Xbox.
I heard that excuse from a video before.
I think Razer is locked into some exclusivity deal with MS, where they get more dividends to make their products just for the Xbox only. Itâs not like anyone on the PS or Nintendo side cares. Razer makes shitty console products and shitty computer accessories.
The Deathadder was a good mouse, but you could get a much better mouse in the same price range.
To the guy who ripped his button out im pretty sure you can take the whole button out put that back in get some wire clips order some quick disconnects and learn to crimp
You dont have the quick disconnects with a little tab so it makes taking them off a pain in the ass i had this issue and almost did what you did.
Go to the modder in your area thread get them to fix it
Btw if your on pc a ps4 stick would do fine
My atrox has no issues in two years owning it nothings broke and im reallly rough with my atrox slaping slamming
See the pick with a small red line and an arrow put a flat head therr and wiggle wiggle wiggle
Thanks @dtgodmage22 , the parts arrived today from FocusAttack, and well, I ordered a crimping tool as well, Iâll use the video inside your post to do the crimping
I purchased 4 buttons, and 10 QDs⌠so I think I have several attempts haha
Also I learned how to remove the QDs easily. So I just need to replace the button and connect the cable
You guys see the supposed ps4 atrox bthey had at e3?
I believe it when I see it.
Ok maybe not e3 i read the guys post supposedly from a uk event
Razer Atrox for the 360 is being sold for $100 on Amazon. Does anybody recommend it?
No
Considering seeing some of the posts of the case breaking and wearing out easily, Thank you for the message
Yo I saw that deal too and copped one. Half off for brand new was just too good of a deal! Just got it in the mail today actually. The stick is nice, but it definitely has its quirks
I really like my 360 atrox with UFB. The Turbo bottons can Be used for mapping touchpadkey, l3 & r3.
Iâve got a question about the 360 atrox turbo panel. By default the 360 version achieved lock for home by kgnd, but for start and select in firmware, by putting 5v on a pin on the atrox pcb.( if i understand correctly) Ive replaced the pcb by a ufb witch Powers the Turbo panel for the playerleds. Could i just solder the start and select gnd to the Middle pin of the switch on the back of the pcb, the one that has the trace from the home button leading to it. Or would the 5v on pin in unlock position thing interfere with things?
Yes
Maybe we should change the title of this thread to âThe @Darksakul Hate Razer Arcade Stick Threadâ 
we all know you donât like Razer products why keep reminding us? I have never had any issues with my Razer purchases.