Need a Modder/Builder in Your Area? Check This Post

[Dracula_X]

Does anybody mod sticks in the area of San Jose, California?

rtdzign - San Jose Bay Area/Mountain View

[Dr.Zero]

is it possible to dual mod a ps3 pad so that i could use it on an xbox ive tryed the ps2 pad converter for it and hate the ps2 pad if someone could help me that would be sweet

[Frankfurter]

Anyone in the las Vegas area?

[Jamin3131]

Anyone in the las Vegas area?

There will be quite a of them next week

[Kingofqueensz]

Anybody in NYC? I message the two guys on the first page with no luck. My ps3 isn’t registering my joystick inputs and i have a TvsC stick which needs to be dual modded.

[gahrling]

My ps3 isn’t registering my joystick inputs

What stick do you have?

[bullre]

Looking for a dualmodder in tokyo, te stick 360>ps3

[gahrling]

Looking for a dualmodder in tokyo, te stick 360>ps3

You could easily do that yourself with no need to solder. Depending on your model of stick then all you’d need is either a Kitty TE or a Cerberus board.

[Kingofqueensz]

What stick do you have?

i have a madcatz se with a seimitsu joystick

[gahrling]

i have a madcatz se with a seimitsu joystick

There are two switches on the SE turbo panel. Make sure they are set to ‘DP’ and ‘Unlock’

Then check that the joystick harness cable is still properly attached. The SE harness is really bad quality and will slide off a proper joystick without some kind of glue.

[Kingofqueensz]

There are two switches on the SE turbo panel. Make sure they are set to ‘DP’ and ‘Unlock’

Then check that the joystick harness cable is still properly attached. The SE harness is really bad quality and will slide off a proper joystick without some kind of glue.

i opened up my stick and indeed the harness was off. now my question to you is what kind of glue can i use

[J6U]

Anyway to mode Street Fighter Volt the app? I don’t think there is any. It’s got obm files and pvr files.

[gahrling]

i opened up my stick and indeed the harness was off. now my question to you is what kind of glue can i use

Glue gun + hot glue, silicone sealant, putty… pretty much anything that is not permanent, non-conductive, and non-corrosive.

Don’t use super glue.

In an ideal world you’d simply solder on an official Sanwa or Seimitsu harness.

[randyliu02]

Things I can do
Dual mod
Joystick/Button Swaps
Padhacks the usual.
Make Artwork
USB Repair
General troubleshooting.

It’s better for the person to supply the parts for me to do, but I can also buy the parts and mod.

I am in the Bay Area, San Francisco. I am usually at the Freedemoniasessions.

hey i’m looking for someone to help me with my fightstick i’m located in berkeley

[GrayFawkes]

Anyone in Orlando,FL? I need a TE repaired.

[Trajedi]

Looking for a modder in the San Diego for my Hori Arcana Heart 2 stick. Thanks.

[Sephz]

What kind of requirements do you have to fulfill to get on the list?

[Super_Rob64]

Is there a mod out there where the headset jack can be replaced with audio sound from the game, so when i plug in my headphones to my fightstick I can only hear the game sounds? I have a Hori VXSA stick and I’m wondering if modders can do that.

[Rufus]

Is there a mod out there where the headset function can be replaced with audio sound from the game, so when i plug in my headphones I can only hear the game sounds and such? I have a Hori stick and I’m wondering if modders can do that.

It’s doable – though I think regular wireless headphones would be a cleaner way to go.

[Super_Rob64]

It’s doable – though I think regular wireless headphones would be a cleaner way to go.

Yea but I also don’t want to take away the games sound from my opponent, what kind of headphones do ppl like Fchamp and Daigo use?