Need a Modder/Builder in Your Area? Check This Post

[mr.mortified]

you might as well just get an audio splitter or something like a mixamp for your headset then

[MonoTekETeA]

What kind of requirements do you have to fulfill to get on the list?

First Welcome to the community of stick modders and builders.

Post where are you from, we don’t need a address just a State and home city, if you are Outside the US, the Country, region/province you are from and city

To be on the safe side you you to also be eligible for selling on the Trading post, which from your profile you are. And you have a gallery of your works that also good.

[jdm714]

This?
http://shoryuken.com/forum/index.php?threads/125664/

[underwing]

Looking for a modder in the San Diego for my Hori Arcana Heart 2 stick. Thanks.

I’m a bit swamped, but might be able to squeeze you in sometime next week or the week after. I’m in the La Jolla area. What kind of work do you need done? PM me.

[lmczitz]

To:
jdm714 and underwing:
Yeah it’s like that but the case will be housing the side of the pad with the buttons . It will have with quick release screws to open it fast and easy (The idea is to make the case as accessible as possible). The pad will not be broken and or soldered inside so it will be connect it to MC Adapter the way it was meant to. This way you can swap your favorite pad whenever you want without the need of rewiring anything.“The Arcade Pad” will be Plug-And-Play from the very beginning.

[jdm714]

I did not look at your Post fully before typing this.
After finishing this, I see that I am typing what you want.

The Pad has to be broken and soldered.

The only way I can think of not opening and soldering is adding FGWidget Controller.
But there will not be total modularity going on.

FGWidget Converter can be set for SNES, Saturn, PlayStation.
A switch can be added if want to switch.
Else it will just be one of those.

FGWidget Converter what does, is take an SNES or Saturn or PlayStation.
Takes the Data Signals and converts into Raw Signal.
These Raw Signals can be connected to something.
Connect to Buttons and Joystick if want.
Connect to another PCB is cool thing.
Another PCB creates Converter.

Now since you do not want to butcher a Pad, the FGWidget Converter comes in.
There will be a Saturn Controller Extension connected to FGWidget.
This way you just connect your Saturn Pad to the Extension piece.
No need to cut your Saturn Controller Cable.

Okay, so now you have Saturn Pad connected to Extension end.
Extension connected to FGWidget Converter.
FGWidget converting Saturn Data to Raw.

Now from the FGWidget Converter, the Raw Signals will go to Multi-Console Cthulhu.
From Multi-Console Cthulhu, connect to Action Buttons of the Case.
Then connect Imp v2 to Multi-Console Cthulhu.
Then modular Outgoing Cables go to Imp v2.

Done.

Since you don’t want to break Pads, you’re limited to what the FGWidget Converter supports, regarding Plug and Play.

[lmczitz]

Jdm714, yes! that is how I like to do it.
Right now the most important thing for me is finding a person with the skills to make a compact, stylish (in a simple way) & functional case big enough to feet the small arcade buttons and the pad. Which buttons will be best for this kind of project? korean or japanese? I am thinking about the one with smallest height to keep the case as thin as possible.

[rtdzign]

Please remove me from the list.

[CanadianDstryr]

Edited my post.
My school schedule is more forgiving this semester, so I deleted the part about not working while school’s in session (I also apparently forgot to take down that bold “not open for buisness” text over the summer, explains the lack of requests lol).

Also, I moved to Winter Park, still in Central Florida, but now nearer Orlando.

[PandaStyle]

Is there anyone in the Lodi, CA area? I’ve got a Fightstick Pro that I would like to have dual modded

[Onslaught_X]

Ugh, none for Colorado?

The FG scene is virtually dead here…

[MonoTekETeA]

Rtdzign removed and Canadian’s location altered.

[CasualGamerCC]

Wondering if I can get on the list. I own a physical store in Corpus Christi, TX. We host video gaming tournaments and I provide dual mod and technical services to people in town. I can also handle shipping if people would like to send in a stick over long distance. We can handle custom artwork requests, all types of PCBs and light mods, MC Cthulhu cables, etc. We are also a retailer of Sanwa, Seimitsu, and Happ Controls arcade parts.

Edit: We are also capable of troubleshooting down to a component level as I have equipment for BGA and SMT soldering and desoldering.

[abkallday]

Abkallday
Columbia, South Carolina

I can add new buttons and sticks to fightsticks.

[Ver314]

Ugh, none for Colorado?

The FG scene is virtually dead here…

are you serious? have you not checked out extrafresh.net?

[Onslaught_X]

are you serious? have you not checked out extrafresh.net?

No…why?

[Bojann]

I also mod and create arcade joysticks

Bojan Novaković - Serbia
my site: www.arkadna-prodavnica.com
gallery: www.podmornice.com/stick/galerija.html

[abkallday]

Add me to the modders list

[MonoTekETeA]

Gah, sorry man. I missed you and CasualGamers.

Abkallday, you have been added.

Casual Gamers, you need more posts and time on the forum and then I will add you. (6 months, 50 posts)

[AVikingsBeard]

Anyone in California near the central valley? Like around Visalia or somethin?