No text!! Friggin beautiful piece of work!!
Why thankyou, heres the finished article
I think I might make a few more of these for different characters. Dee-Jay with Jamaican flag would look pretty nice.
what material and procedure do you do to print the template?
Im going to customize my SE Stick with this pic I was wondering if one of you can show me an example of it with the buttons and stick cut outs on it. I dont have photoshop and college tuition raped my pockets 
So if one of you guys can help Iād really appreciate it.
Evening DocMoose.
Both Chun and Sakuraās flags were off center which is one of the things I think detracting from your Cammy piece. I also think white predominates the picture and having Cammy in the white suit leaves her a bit lost. Take a look at these for some ideas:
http://i64.photobucket.com/albums/h168/thuzle/CStick01.jpg
Itās quite empty, but itās the basic idea.
http://i64.photobucket.com/albums/h168/thuzle/Templates/GLStick00.jpg
Thank you very much, I can work with this 
YES! Youāre very perceptive, it looks a lot better with the corner of the flag like that. I might start working on my second stick now. Youāve inspired me! Thankyou Thuzle
I printed off the art on to an A4 sticky label, then stuck an A4 cold laminate sheet over the top, then I cut out my buttons etc, and finally peeled off the backing and stuck it on. A4 is fine for the Datel/Paewang but wouldnāt work for a lot of sticks.
guys i wanted a template with Guile For SE fightstick and TE fightstick
i got se for now but maybe better if i do it on TE since bigger and more art can be fitted and wont be squished cuz the se is a small stick msg me if u can make this for me guyss thnx alot nice art work by da way.
Just farting around in PS.
Hereās a general question; has anyone produced any stick art with traditional media? That is, has anyone done something with paint or markers or colored pencil instead of strictly digital art? I have zero digital coloring skills, but I can draw, and am wondering if I do my stick art in marker and paint and then put a plexiglass cover over it, how homebrew that might look or if it would be desirable. What do you guys think?
@ FoxHoundQueen :
That sounds like a nice idea. Try it out and post the results when you are finished.
Iām pretty sure some people have had the same idea and implemented it, but not sure who and when they did it. Again, try it out and see if you like the results.
Hereās my traditional media art so far! Gonna put it behind some plexi and install a clear purple ball top and clear pink and purple buttons, as well as spray paint the bezel purple. Itās going to look pretty sweet, hopefully!
http://i54.photobucket.com/albums/g92/steveaintsilver/JuriFlash2.jpg
Just wanted to know. How did you get the vintage looking effect on the flag?
Hey Thuzle,
Can you send me your second .psd of cammy? A bmp with more resolution could be fine too. I think that itĀ“s awesome.
Cheers
Changing my mayflash artwork
Hey guys. I got a modded mayflash, with some mediocre Sagat artwork. I donāt REALLY mind the artwork. but its not mine, also, itās starting to peel at the corners pretty badly. I was thinking of replacing the artwork on it. It is high-res TF2 artwork, with my signature across the bottom. Iām getting it printed soon, and i want to know if anyone sees anything wrong with it. Also Iām a noob at photoshop so cut me some slack. Last time i got artwork printed the holes didnāt line up well, so i think Iām going to leave it without the template and cut it myself, following the button holes. I also might buy some clear buttons too.
x10 thumbnail (with template, even know Iāll take it off before i print it out)
Also the psd if you want to screw around with layers, or look at finer details etc.etc.etcā¦
Iām getting it printed at 300 dpi, 100% zoomed in, no template, (maybe border thatās it), cardstock, matte, and laminated. I might add some effects to the signature but other than that its mostly finished. Thanks.
Also: Thuzle Iām really digging that Cammy artwork!
Also last time I printed it I printed it on my uncles printer (yes I know) and Iāve never gotten something printed professionally before. How would I normally go about doing this? Like bring the psd file on a flash drive or something? Lol Iām pretty much clueless.
Also: I was fixing it up on photoshop. then i realized when i zoom in 100% (which is what people tell me to do when i get something printed) the physical size is 50 by 65. I donāt know what retard made that template but they did a bad job. Is the TE template proper? Can anyone help me fix this?
anyone?
Yes.
Iāve seen a coupleā¦ I remember someone painting the artwork on their wooden stick by hand. Also iāve seen a hand-drawn custom artwork on paper. Had a plexi over it. Your art looks great btw, I wish more people would do their art that way, much more original.
I painted my entire stick black, even the metal plates, but I donāt think that counts lol.