I don’t know if there were 2 types A3, V1623A3 and V0323A3 . so the V1623A3 is preferable for green setup? this is good since V1623A3 still in the market right?
From my experience, the V1623A3 switches are better for this setup. I even had two more V0323A3 sets which I tried as well and ended up with the same results. Also yup they are still available on the market in various Crown levers and separately.
Another finding again might be well known just i didnt know about …
All my fujins except the one i bought in korea has panasonic am51610 … the on i bought in korea has am51630 and the 1630 suprisingly feel and plays smoother than the others .
Is there any place i can purchase those ? @zero_requiem now am trying a wierd kaze effect on the fujin wich is kinda nice , all microswitches am51610 except down input am51630 so far seems nice and compliments the 7mm shaft with 14.5actuator … next i am gonna try at the weekend is all microswitches 1630 … but am scared ill love it and then i wont be able to find the microswitches when they will wear out…
Thanks a lot @jey-are and @“masked rider” , I’ll keep that in mind and begin to search options for import.
hi guys i’m new to the thread here. i’ve had my myoungshin fanta (black) for quite some time but i’m kind of interested in getting it to be super low resistance like the one in this video https://www.youtube.com/watch?v=owv11JIMBo4&t=179s
any tips on that would be appreciated since i’m sure this isn’t only from wear. also are the fanta levers themselves interchangeable with other levers without changing the performance overall (crown and etc) because i’m interested in changing the color.
You can look into the Golden Fanta Kit from Arcade Stick Indonesia (@wazwuz) which have various tension grommets including a light one. Also the Myoungshin Fanta cannot be normally equipped with shafts from Crown due to the size of its shaft’s bottom end being bigger in diameter. You can though equip it with one from a Taeyoung Fanta. With the Golden Fanta Kit, you can use its various shafts with Sanwa LB-30-N bat tops or similar ones.
Golden Core spring is finished, I just try it and it Works, No more Wobble lever. I think this is crucial update for Golden Fanta. Personally I feel rapid movement more precise without wobble, since wobble causing loss of tension when neutral and many times makes me lost my rhythm.
I will start the first batch this weekend. hopefully it will be ready before Christmas. this will be my last Project in 2017. I will move to the next project “Golden Lever Project” in 2018
btw. I was thinking of making Delrin actuator, but now I’m not sure plastic can handle the spring tension without chipping the plastic in long run. I feel Metal (bronze) is more durable for the Golden Core with spring loaded setup. Let me know if many of you still interested in Plastic/Delrin Actuator?
@wazwuz sick news ! count me in the next batch .
I am interested in delrin actuators i do believe they serve a purpose and it would be nice to have em so all can see the difference if there is any .
I have done the testing. and Golden Core solve the wobble issue. but using 7mm shaft I feel the core hitting the bottom of the lever case/body when pivoting (just like green arcade lever). I will try making the chamfer wider for the bottom lips of the Core. hopefully it can eliminate or at least reduce this issue
I would be interested in derlin/plastic too due to using the fujin with the 7mm golden shaft. Using the stock actuator (14.75 i think it is?) but i really wanted to try the 14.5, but i couldnt due to the fujin plating. I would be interested in the golden core spring too.
@Marios very interesting. I have never tried the 1610s but have the 1630 and 1662 which were originally used in a seimitsu.
@wazwuz Definitely interested in the delfin actuator! I also need grommet and switch supports.
Have been playing around with the Golden Fanta Kit for the past week and am really enjoying it, great stuff!
Does the core fits all sizes of shaft or we will need a core for each shaft?
it will fit for all Golden Fanta Shaft size. so you only need one Core for each lever.
I’m so excited about this new tech and want to share ASAP with all of you guys. this tech make korean lever have quality and fell equal to japanese lever.
manteb deh pokoknya bro 
quick question, sorry if this has been asked/answered before. On my myoungshin, one of my microswitches is extremely easy to depress and activate. The other three require a little bit of force to trigger as normal. Does this mean my microswitch is “broken in”, or should I change the microswitch? Is there something I can do to fix the microswitch itself, outside of replacing it entirely? Outside of functioning as normal, it’s a little harder to double-tab that microswitch’s direction, because the lever doesn’t spring back to neutral as fast. I believe they are Gersung A2 switches, could be A3. They are definitely Gersung switches though. Thanks in advance
The 303MJ-DX (Crazy Dongpal) lever is now in ISTmall. Hopefully it makes its way over to Makestick soon, or even a USA distributor. <3
I should be getting some of the core parts from the Super Hwoarang lever kit sometime this month. I also got some bonus actuators and two white tops as well. At least from the tops end, I can now make my Golden Fanta Green kits look closer to Green Game Land’s design. 
Neat. I need to get that and the Kaze V3 lever from them soon. Still weirded out that it’s a chopped collar model only. I wonder how it would feel and perform with the real deal collar.
I just ordered from you but now you are making me want to buy more stuff! 
damm, that white myungshin battop is very hard to get items. congrats, you finally get it.
Golden Core Update
I will test it when get home. hopefully it will work smooth when using 7mm shaft, and we can have superior “green lever setup”
update. it work like a charm 
I don’t know if this has been posted before but the fujin’s grommet is 45A
I guess it’s just the bushing/spool that adds that extra notch of tension.