Hmmm… Can you please point me to a Korean plate compatible with the Samducksa SDL-301-DX? I’m not familiar…
PS: I happen to have a Crown 303-FK lying around. I don’t know if this helps.
No worries. The flat plate on the 303 will fit perfectly on the sdl-301.
Neat. I guess my eyes are deceiving me but the collar is normal right? The grommet looks like the FLF grommet, both in color and holes, which was loose. The actuator looks like a normal Myoungshin. Is the shaft definitely bigger than default and if so, what would be the most comparable Golden Fanta shaft?
Since I still have a V2 on hand, I believe I have a spare set of V1623A3 switches (I do for sure have some V0323A3 sets) and replace the Panasonic switches. If the V3 shaft is either 9mm or 10mm, I can either drop in my 10mm Golden Fanta shaft or my FLF shaft.
Is the Crown 303-FK flat plate compatible with the Fanta mounting?
The golden fanta shaft will fit but you would have to switch out the bushing for myoungshin’s. One other thing to note is the stock kaze actuator won’t fit on the golden fanta shaft since the hole is too small. The stock kaze bushing is almost exactly the same diameter and length as the taeyoungs but have yet to compare it to myoungshin’s. If you do opt for golden fanta parts just use a 10mm shaft and 16mm actuator. Pretty sure the grommet used is the same soft red grommets that makestick sells.
@ShinMagus shouldn’t be a problem since I used my 309mj and sdl-301 flat plate when testing my fujin on my te2.
Hey guys, really appreciate all the stuff I’m learning through this thread.
I have a bit of a problem, or at least I fear it might be a problem; I made an order on Makestick and the payment went through but I’ve yet to receive a confirmation e-mail and I’ve even e-mailed noplzz@naver.com along with mibu.hiro@outlook.com to no avail. I’m not sure if my order has gone through, nor do I have a tracking number. Anyone have some insight on what to expect from Makestick? I made the order on the 1st of Oct and it’s now the 5th.
Thanks guys.
I placed an order one day after you did, and nothing other than my payment going through happened so far either… 
Ah, so we’re in this together then. :c I’ll be sure to update. Wish I knew how long shipping usually takes to Toronto from there.
i have some n00bs questions about the fanta stick.
what differences have the Taeyoung Fanta and the Myoungshin Fanta ? and why these two brands have “fanta” sticks? what is the story behind it?
i would like to buy a etokki witht he fanta lever and mod it with the golden fanta mod.
@BeikedGoods @ShinMagus Theres 10-day-long Hangawi holiday that started at the beginning of October in Korea. Makestick only ever takes payment then shipment arrives within a week or so. I’ve ordered from them at least 4 times already and it’s always the same with no email about shipment. If you log in to their website and go to the tab “My Page” on the top right there should be info regarding orders and shipment.
Oh, thanks! I hope the holiday doesn’t affect the order; but then again, if it does, so be it. They have the right to enjoy themselves c;
The Taeyoung lever is the original Fanta lever. I am currently tired atm so the story isn’t going to be accurate but the Fanta part refers to the Taeyoung lever being used at an arcade called Fantasia Arcade in Korea. It became popular to the point that Myoungshin made their own version to rival it. The most obvious differences are that the Taeyoung has longer travel time due to the collar’s funnel being wider than the Myoungshin. The Taeyoung has switches placed closer to the middle than the Myoungshin. Another thing is that due to the switch placement, the Taeyoung uses a small actuator while the Myoungshin’s actuator is bigger to compensate the slightly more spread apart switches.
Guys since i cant find any good ifno out there , i guess ill ask you , i want to install a korean stick into my panthera , i have the k stick i have the harness , but i just noticed that my harness is male and the panthera razer qcb has male as well what do i have to buy to install it and from where ? thanks in advance
or my question is tottaly stupid and i just have to just plug the harness into the existing 5 pin that the panthera has ? the one am holding in the picture.hopefully pictures goes through
According to the website my order was shipped (hours ago)!
I don’t have a panthera, but once you have your 187-to-5pin harness setup… Plug it into the 5 pin where the stock lever would plug into.
Thank you @jey-are think so too , i opened up the small black box inside my panthera to clean and see if anything is wrong before the instalation , i unpluged the cables and i dont remember the order to put them correct back on ,google didnt help me much , is there someone with razer panthera or knowledge to help me put them in order ?
@Marios it will be longest wire to shortest starting from the top going clockwise.
http://i20.photobucket.com/albums/b208/TheOry8/IMG_20170809_222209.jpg
nono not on the stick on the actual pcb , https://gyazo.com/dc876b5cee1ce6cea75c5f7e2ceb9015 @zero_requiem
hi all, i read lots of comment in this forum about korean lever and finally i decided to purchase a crown 309helpme (korean model) due to a really positive feedback; but i have a madcatz te s arcade stick. So my question is if is really necessary to drill the panel hole up to 35mm so than i can install the crown 309collared or just buy the crown 309mj with a 35 tension rubber. I have no problem for the drilling process, i have a drill press with 35mm step drill, i just want to know if collared version is really better in performance compared to 309mj