Replied…
Theres not that many people that have their plexi’s with artwork sorted, something I’m kicking myself for. Getting A3 printer middle of next week, so will be able to offer more.
Decide the Art is the hardest part of all lol
Im getting headache because i cant choose any of my own mockups 
The only thing i know for sure is that will be based on KOFXII
There’s plenty of inspiration in arts thread, make sure to post yours here though 
Since you said folding acrylic is easy for you, would you consider making an SE plexi? I’d gladly pay for overseas shipping for something like that =)
I’d really need an SE in my hand to consider it. If someone would lend me one for a while I’d do it in a flash and provide a free plexi for their troubles.
u can borrow my SE
We shall have to have a little chat later today kind sir 
Sorted your art yet?
got some A3 matte paper, and a printer, just waiting till monday so i can print the artwork. PM me about the SE stick
The SE stick, is it a straight angle? I’ts not a curved part where it drops down… the corners are fine, I just cant bend acrylic on a curve…
seems like a straight angle to me
OK squaddy, I’m popping out for a beer - we can discuss postage of stuff and sort stuff out when I get back.
Before I leave what would be the interest in a TE cover that hugged the 2 downward angles at the front? Obviously with the intent of shoving artwork in there?
Also, I have found a pretty handy ghetto way of popping art in your TE stick with just an A4 printer and a hobby knife. Remember my plexi is 1mm thicker than art’s so running around the holes with a blade will not damage it…
the downward angle cover sounds cool, can u also do etchings on the plexi’s? you could just make a full plexi that covered all the angles and the bottom lol.
Etching is possible but something I can’t really do regurlarly due to the time involved.
Bearing in mind the acrylic sheet is flat, cutting a shape that wraps around it is pretty much impossible. Alth the sides are possible aswell, the angled corners would prove a bit of a bitch…
PM recieved, will probably post it out tomorrow.
ah damn 
you changed the title to just plexi cutting - shame not many if any UK stick makers… guess ill try and mod my own TE stick :E lol
May wanna hang around, started another…
And I already ordered my plexis… cries.
Mario won’t be happeh (you know)!
Jokes aside, is it too late for a small “Aguaporf” on the lower left side of the extended plexi or above the turbo/home button slot?
You can choose whatever standard font, even Arial it’s fine for me, as long as it does not delay shipping.
Very pretty please with…
http://2.bp.blogspot.com/_WyikUaVMkdY/SfKj370q6oI/AAAAAAAAAJk/P6DmBBcAbbk/s400/cherry+on+top.jpg
Argh. Etching I want to avoid for loads of reasons. But the picture of the cake has made me go soft and gooey. I can’t etch fir you, all packed up and awaiting funds to clear but I’ll seeif my graphics department can knock you up something in vinyl. Unlikely but I’m nice like that so I’ll ask.
<3
It’s ok I was expecting that, but I had to try right? 
Hopefully money should be in your acc. tomorrow, it was taken from mine on friday, I guess they’ll work it out today.
As soon as I receive them, I’ll post extended info here on what IBAN is and how to work with transactions between the various European states in case people don’t know, and I’ll also give my impression of the plexis, which I’m sure will be great!
By the way, shouldn’t this be stickyed too? I call discrimination against us Europeans (j/k)!
Would not object to that.