Brook Converters Thread

[GOGO.Zippy]

I’m considering getting the red P4/P3 > XB1 converter. Im hoping to use it to use a PS3 logitech GT wheel, and a SF4 wireless madcatz fightpad.

I’ve not seen any comments on this, but is it compatible with the wireless madcatz dongle for the sf4 fightpad? will it work with killer instinct?
thanks

@shredguitarist
It use GT Wheel, I think it should be well with Madcatz wieless Fightpad.

[droX]

Hello
I use a fighting board and i saw with the latest update that i can :360:
(4) Adjust button remap(On Xinput and PS3 mode,Touch button can be replaced with SELECT button)

I don t know how to do it… Anyone help please!

[XiBassiX]

Hello everyone.

Tried to update my XBONE->PS4 converter yesterday, but got stuck after updating ZPPN003-A. When I run ZPPN003-B, it doesn’t recognize my converter. My PC does recognize it as a PS4 controller. Am I using the right .exe? How can I fix this so I can finish the update. Thanks!

[Egan311]

I think Brook makes a good product and I appreciate the support you show on the forums to help your customers.

However, considering the amount of confusion people have, I would suggest streamlining your update process and possibly work with a UX designer and writer who speaks English as their native language (or is extremely fluent).

No offense intended. Just want to see the product and community succeed.

[Edeazor]

Hi,
Sorry to disturb you, but i’ve a problem with my brook 360/One to PS4 adapter.

With the update on PS4 recently, there’s some problem.

I’ve tried to follow your instruction.
First, everything gonna be allright.
I’ve the litte icone 3PS4 Wired Gamepad".

I’ve tried to follow the step, but at the end, i’ve done probably a mystke cuz the Zeroplus device doesn’t appear on properties.

So, i’ve launch the application who was online today or yesterday. The updage seems successfull, i’ve done it with a controller.

But, it’s a fightpad, and when i tried to plug into my Ps4, the controller (linked to the brook) is not detectec. I can do nothing.

i’ve tried others driver’s update but it’s worst.
Now, when i connect the brook to me pc,  it appears like a HID transfert.

Edit : I can move back the brook by doing
The A uptade : it come back to Ps4 wire gamepad.
But one led stay purple and when I plug it on ps4, thé fightpad is not recognize.

What can i do ? Reboot the brook, but how ? plz help, i can’t no longer play to SFV without the brook.

Thx for help Coco.zippy

[Falkentyne]

Remove and re-insert the adapter into the computer.
Does it appear as a “Hid transfer device?”

[omeduss]

its just me or the ps4 touch pad emulation doesnt work anymore with the last firmware update?
using a 360/xbone one to ps4 converter

[ice_berg_slim]

Looks like everything is working great. Thanks for the good work @GOGO.Zippy

[Labula]

When I go into devices and printers it shows up as a PS4 Wired Gamepad. If I don’t run the exe and do the button combination nothing happens still. The controller light just blinks at me. The stick doesn’t change led colors and there is no disconnecting or reconnecting of the stick. This is why I really want them to release an update package that doesn’t involve me needing to hook up my XBOne controller to it.

Has anyone had any luck with the Xboxone to ps4 converter yet? Did everything falken said with no luck. The unit i just stays blue.

May I ask a question?
Go to “Devices and drivers” (Start menu).
Press Home+Start together, (or press+hold home first, then start, then release both)=red LED.
Now press and hold Left Joystick and press Home.

what happens in devices and printers?

on my computer, I hear the “USB Disconnect” sound, and PS4 wired device disappears and “USB Hid Transfer” appears.
USB converter is purple.

this happens without the flasher EXE running.

Note: the joystick is not responsive when this happens. You must run the flasher at this point. No joystick inputs will work.
Running the flasher.exe instantly says “ready to update firmware”

Then you update, release with the combination again and you’re good to go.

[GOGO.Zippy]

When I go into devices and printers it shows up as a PS4 Wired Gamepad. If I don’t run the exe and do the button combination nothing happens still. The controller light just blinks at me. The stick doesn’t change led colors and there is no disconnecting or reconnecting of the stick. This is why I really want them to release an update package that doesn’t involve me needing to hook up my XBOne controller to it.

Has anyone had any luck with the Xboxone to ps4 converter yet? Did everything falken said with no luck. The unit i just stays blue.

May I ask a question?
Go to “Devices and drivers” (Start menu).
Press Home+Start together, (or press+hold home first, then start, then release both)=red LED.
Now press and hold Left Joystick and press Home.

what happens in devices and printers?

on my computer, I hear the “USB Disconnect” sound, and PS4 wired device disappears and “USB Hid Transfer” appears.
USB converter is purple.

this happens without the flasher EXE running.

Note: the joystick is not responsive when this happens. You must run the flasher at this point. No joystick inputs will work.
Running the flasher.exe instantly says “ready to update firmware”

Then you update, release with the combination again and you’re good to go.

@Labula

Which file and converter to update?
Please offer more info to help you. Thanks

[Edeazor]

@Falkentyne Unfortunatly yes

[Labula]

I am using ZPPN003-A_V18_20160408 I have the XBOne to PS4 Converter. I am trying to update it on a Windows 10 pc with my Elite controller.

When I go into devices and printers it shows up as a PS4 Wired Gamepad. If I don’t run the exe and do the button combination nothing happens still. The controller light just blinks at me. The stick doesn’t change led colors and there is no disconnecting or reconnecting of the stick. This is why I really want them to release an update package that doesn’t involve me needing to hook up my XBOne controller to it.

Has anyone had any luck with the Xboxone to ps4 converter yet? Did everything falken said with no luck. The unit i just stays blue.

May I ask a question?
Go to “Devices and drivers” (Start menu).
Press Home+Start together, (or press+hold home first, then start, then release both)=red LED.
Now press and hold Left Joystick and press Home.

what happens in devices and printers?

on my computer, I hear the “USB Disconnect” sound, and PS4 wired device disappears and “USB Hid Transfer” appears.
USB converter is purple.

this happens without the flasher EXE running.

Note: the joystick is not responsive when this happens. You must run the flasher at this point. No joystick inputs will work.
Running the flasher.exe instantly says “ready to update firmware”

Then you update, release with the combination again and you’re good to go.

@Labula

Which file and converter to update?
Please offer more info to help you. Thanks

[GOGO.Zippy]

I am using ZPPN003-A_V18_20160408 I have the XBOne to PS4 Converter. I am trying to update it on a Windows 10 pc with my Elite controller.

When I go into devices and printers it shows up as a PS4 Wired Gamepad. If I don’t run the exe and do the button combination nothing happens still. The controller light just blinks at me. The stick doesn’t change led colors and there is no disconnecting or reconnecting of the stick. This is why I really want them to release an update package that doesn’t involve me needing to hook up my XBOne controller to it.

Has anyone had any luck with the Xboxone to ps4 converter yet? Did everything falken said with no luck. The unit i just stays blue.

May I ask a question?
Go to “Devices and drivers” (Start menu).
Press Home+Start together, (or press+hold home first, then start, then release both)=red LED.
Now press and hold Left Joystick and press Home.

what happens in devices and printers?

on my computer, I hear the “USB Disconnect” sound, and PS4 wired device disappears and “USB Hid Transfer” appears.
USB converter is purple.

this happens without the flasher EXE running.

Note: the joystick is not responsive when this happens. You must run the flasher at this point. No joystick inputs will work.
Running the flasher.exe instantly says “ready to update firmware”

Then you update, release with the combination again and you’re good to go.

@Labula

Which file and converter to update?
Please offer more info to help you. Thanks

@Labula
Confirm again, Can the Elite controller work well with converter before updated?

[Labula]

Yes. After eight minutes it shuts off just like the regular one.

[Brook_Engineer]

Hi @Brook_Engineer

I didn’t see your post and started trying to do the update. I started the ‘A’ exe and input the commands to go into update mode. But then I got a message to “Please plug in controller”, despite the controller still being plugged in. Now the adapter is stuck with both the blue and red LEDs lit. It won’t register any controller plugged into it so I can’t input the commands to change the mode.

Is this related to the bugs you guys found? Do I just need to wait for the fix?

Please wait for the fix

[Brook_Engineer]

HI @Brook_Engineer

I’ve plugged in my PS3 to PS4 converter today to try updating it again with the new firmware and PC isnt even recognising it anymore

In device manager it just says “unknown device”.

1. Retry?
2. What is the color of the light when plugging into PC and console?

[Falkentyne]

@Falkentyne Unfortunatly yes

That means it’s still in update mode.
I had this problem originally because I put my computer into a “loop” by not knowing how to exit out of update mode. It took me like 10 flashes before I did a search and found the correct key combination that was explicitly described. Then I instantly succeeded in the flash.

What I remember doing is restarting the computer, the Brook wanted to flash instantly as soon as it was plugged in, and I did the flash, it said remove the update mode. The trick was, looking at device manager AFTER the flash and seeing if it said “PS4 wired controller”. if it did, then I just pressed Home+Start, Left Joystick+home, and closed the flasher.

[Brook_Engineer]

I’m having issues, I can update the firmware but I can’t release the update mode. It goes from blinking blue purple to solid red after option start, then press left stick does nothing, then press left stick and option goes back into blinking blue and purple. I can’t get out of this mode, anyone help??

Can you shoot a video?

[Brook_Engineer]

@GOGO.Zippy Had an issue with updating firmware at a tournament today. The instructions to update the firmware asked us to download the drivers for the converter, but for some reason, we couldn’t find them on the site.

http://www.brookaccessory.com/download/

[Brook_Engineer]

I’m trying to update my brooks super converter “PS3/PS4 to Xbox One Controller Adapter (Red)”
The problem is it’s stuck at the first screen that says “Firmware Update, Please plug in controller”

I’ve tried: Different ports, 2 Different PC’s ( both running windows 10 64bit ), Disabling windows defender, with/without the ZeroPlus driver and followed the youtube instruction video.

The adapter works with a PS3 controller but I’m trying to update it to make it work with my Madcatz TE Fightstick, I also purchased a PS3 to PS4 Super Converter (White) and the update worked OK allowing my Madcatz TE fightstick to work on my PS4.

Any help would be great.

can you shoot a video?

Here’s a video I made to show the issue with the update https://youtu.be/z7RO70kpsJE

Thanks

when doing firmware update, did you also connect your controller with the converter?