Brook Converters Thread

[HankMcCoyX]

Could you please help me? I’ve done everything correctly so far and I’ve installed all the updates but when I try to do the logout sequence I can’t get the stick to glow blue again. I’ll do the button sequence and the light will go from blinking purple to solid red, but when I hold down L3 and then tap the home button while holding it, the color goes back to blinking purple and asks me to update again. Please help, I’m scared to remove the stick without exiting update mode.
·

@"Robert Bonner"
Please follow combo key to enter and exit updating mode.
While you updated successful, LED will stop flashing to sodid purple.

If your converter works with controller/stick, you couldn’t update B patch and Zeroplus USB Driver.

Only updated A patch file to fix issue on V3.15
Like below video file…

https://youtu.be/oCA8JgqehMI

Did you ever fix this problem? I am having the same problem.

Can @GOGO.Zippy help with this?

Exiting firmware update mode makes the LED PURPLE, not blue.

[HankMcCoyX]

Could you please help me? I’ve done everything correctly so far and I’ve installed all the updates but when I try to do the logout sequence I can’t get the stick to glow blue again. I’ll do the button sequence and the light will go from blinking purple to solid red, but when I hold down L3 and then tap the home button while holding it, the color goes back to blinking purple and asks me to update again. Please help, I’m scared to remove the stick without exiting update mode.
·

@"Robert Bonner"
Please follow combo key to enter and exit updating mode.
While you updated successful, LED will stop flashing to sodid purple.

If your converter works with controller/stick, you couldn’t update B patch and Zeroplus USB Driver.

Only updated A patch file to fix issue on V3.15
Like below video file…

https://youtu.be/oCA8JgqehMI

Did you ever fix this problem? I am having the same problem.

Can @GOGO.Zippy help with this?

Exiting firmware update mode makes the LED PURPLE, not blue.

I was able to fix it but letting go of the left stick first, then the center button.

[omeduss]

Hi, I just got a xbox360 to ps4 converter and I want to update it because it keeps disconnecting.

But since the stick doesn’t have L3 and I don’t have any wired xbox360 controller, I can’t update it…

Is there a way to bypass that ? I don’t want to buy a wired xbox360 controller just to update the converter

@coiL
Please looking your inbox…Thanks

I am in the exact same situation with a different adaptor(xbox one/360 - ps4)… Zippy can you send me a pm? thk

[GOGO.Zippy]

Hi, I just got a xbox360 to ps4 converter and I want to update it because it keeps disconnecting.

But since the stick doesn’t have L3 and I don’t have any wired xbox360 controller, I can’t update it…

Is there a way to bypass that ? I don’t want to buy a wired xbox360 controller just to update the converter

@coiL
Please looking your inbox…Thanks

I am in the exact same situation… Zippy can you send me a pm? thk

@omeduss
Ok, which converters do you want to updatr?

[GOGO.Zippy]

Could you please help me? I’ve done everything correctly so far and I’ve installed all the updates but when I try to do the logout sequence I can’t get the stick to glow blue again. I’ll do the button sequence and the light will go from blinking purple to solid red, but when I hold down L3 and then tap the home button while holding it, the color goes back to blinking purple and asks me to update again. Please help, I’m scared to remove the stick without exiting update mode.
·

@"Robert Bonner"
Please follow combo key to enter and exit updating mode.
While you updated successful, LED will stop flashing to sodid purple.

If your converter works with controller/stick, you couldn’t update B patch and Zeroplus USB Driver.

Only updated A patch file to fix issue on V3.15
Like below video file…

https://youtu.be/oCA8JgqehMI

Did you ever fix this problem? I am having the same problem.

Can @GOGO.Zippy help with this?

Exiting firmware update mode makes the LED PURPLE, not blue.

@HankMcCoyX
Every converters owned two version firmware, one is mormal(Blue LED), the other is tournament(purple LED)
I guessed you used the Tournament to update.
If you don’t this ver, please download and try…thanks

[omeduss]

Hi, I just got a xbox360 to ps4 converter and I want to update it because it keeps disconnecting.

But since the stick doesn’t have L3 and I don’t have any wired xbox360 controller, I can’t update it…

Is there a way to bypass that ? I don’t want to buy a wired xbox360 controller just to update the converter

@coiL
Please looking your inbox…Thanks

I am in the exact same situation… Zippy can you send me a pm? thk

@omeduss
Ok, which converters do you want to updatr?

xbone one/360 to ps4. thk

[GOGO.Zippy]

Hi, I just got a xbox360 to ps4 converter and I want to update it because it keeps disconnecting.

But since the stick doesn’t have L3 and I don’t have any wired xbox360 controller, I can’t update it…

Is there a way to bypass that ? I don’t want to buy a wired xbox360 controller just to update the converter

@coiL
Please looking your inbox…Thanks

I am in the exact same situation… Zippy can you send me a pm? thk

@omeduss
Ok, which converters do you want to updatr?

xbone one/360 to ps4. thk

@omeduss
Please view your inbox. =)

[Loryuo]

Are they out of stock everywhere? I was hoping to get one, but seems like i can’t find a ps3/ps4 converter at all anymore for my Qanba Ebony Fusion haha

[mauldie]

Do the converters work with directinput devices (sega Saturn USB knock offs). I searched the internet. Couldn’t get a solid answer and if they do with which one would I need. Thanks a head of time

[gus6464]

Quick question,

I have a razer atrox for xbox one. If I get the Xbone->PS4 adapter and connect it to my PC will it recognize the stick as an HID device and allow all buttons to be used?

[GOGO.Zippy]

Quick question,

I have a razer atrox for xbox one. If I get the Xbone->PS4 adapter and connect it to my PC will it recognize the stick as an HID device and allow all buttons to be used?

@gus6464
I think all buttons can work. Or you can look and test it in game control panel

[DBC]

Are they out of stock everywhere? I was hoping to get one, but seems like i can’t find a ps3/ps4 converter at all anymore for my Qanba Ebony Fusion haha

Have you tried Arcade Shock? Just now, it let me add the PS3/4-to-PS3/4 to the cart and proceed to checkout, so I assume that means it’s in stock there.

[GOGO.Zippy]

Do the converters work with directinput devices (sega Saturn USB knock offs). I searched the internet. Couldn’t get a solid answer and if they do with which one would I need. Thanks a head of time

@mauldie
Yes, they work with D-Input on PC

[gus6464]

Quick question,

I have a razer atrox for xbox one. If I get the Xbone->PS4 adapter and connect it to my PC will it recognize the stick as an HID device and allow all buttons to be used?

@gus6464
I think all buttons can work. Or you can look and test it in game control panel

Ahh ok I guess I will give it a shot. The issue I have now is that the PC doesn’t recognize the atrox as an xbox one controller so P4/K4 don’t work.

[GOGO.Zippy]

Quick question,

I have a razer atrox for xbox one. If I get the Xbone->PS4 adapter and connect it to my PC will it recognize the stick as an HID device and allow all buttons to be used?

@gus6464
I think all buttons can work. Or you can look and test it in game control panel

Ahh ok I guess I will give it a shot. The issue I have now is that the PC doesn’t recognize the atrox as an xbox one controller so P4/K4 don’t work.

@gus6464
these 4P/4K are outputting Axis function not button on PC … :s

[chrisofrays]

Hi there considering doing dual mod for my matcatz 360 TE round 2 to work on ps4. If these adapters are good i might just get one instead. Any thoughts what i should do? Is this compatible? I cant see any madcatz controllers listed on the brooks website

[GOGO.Zippy]

Hi there considering doing dual mod for my matcatz 360 TE round 2 to work on ps4. If these adapters are good i might just get one instead. Any thoughts what i should do? Is this compatible? I cant see any madcatz controllers listed on the brooks website

@chrisofrays{)
I think it can work fine with Brook converter, because old stick was sold out, we continued buying it for verifying.

[Loryuo]

Are they out of stock everywhere? I was hoping to get one, but seems like i can’t find a ps3/ps4 converter at all anymore haha

Are they out of stock everywhere? I was hoping to get one, but seems like i can’t find a ps3/ps4 converter at all anymore for my Qanba Ebony Fusion haha

Have you tried Arcade Shock? Just now, it let me add the PS3/4-to-PS3/4 to the cart and proceed to checkout, so I assume that means it’s in stock there.

Just checked and still can’t seem to get it into the cart, so maybe it was an error?

edit: ah i was looking at the wrong one. thanks , i’ll order it now, before it’s too late

[gus6464]

Quick question,

I have a razer atrox for xbox one. If I get the Xbone->PS4 adapter and connect it to my PC will it recognize the stick as an HID device and allow all buttons to be used?

@gus6464
I think all buttons can work. Or you can look and test it in game control panel

Ahh ok I guess I will give it a shot. The issue I have now is that the PC doesn’t recognize the atrox as an xbox one controller so P4/K4 don’t work.

@gus6464
these 4P/4K are outputting Axis function not button on PC … :s

Do you think using the PS4 adapter will make the Atrox be recognized either as a full fledged Xbox controller or PS4 controller?

[caspian]

I’ve been fruitlessly attempting to update firmware file A for my XBOX360/PS4 converter (lime green). I finally was able to initiate the firmware update and now my PS4 doesn’t recognize my 360 stick at all, no green light around the home button even.

HID transfer image
http://tinypic.com/view.php?pic=2lxi3au&s=9#.VsJDg_krLIU

Looking for any help I can get so I can at least play SFV tonight, 8-min timeout or not.