@“Jasen Hicks” is it safe to assume the EZ Mod for the TE2 is for PS4 only? Or do you think it’ll also work for the XBONE? Will the lock switch work on the EZ Mod? Finally, would the haptic button become a TP_KEY button?
So the version I showed off is a PS4 only version. That being said I am modifying the design significantly to make it work with all versions of the TE2. For the XBONE and the PS4 versions the two buttons on the aux panel are going to have jumpers associated with them so you can set each button to either TP CLICK, L3, R3, or TURBO based on where the jumper is. Additionally, we are adding a little processing power to the board to better control the LEDs across the systems. Specifically, the PS4 and X360 version will have player LEDs the XONE will have the standard single LED that lights up regardless of what player it is, and then the PS4 and XONE stick will have the right most LED on the aux panel blink appropriately with the turbo function.
Awesome. Thanks.
@STEZO_ONE hey random question but where’d you get the smaller, fully clear dust washer from? all i can find are the cloudy ones.
I would be down for one or two mini adcaps designed around a raspberry pi 2/3 and those 5v psu’s that look like the happ ones you use on the adcaps.
It would have a socket connector, composite and stereo audio out with neutrik cutouts for usb or slots for panel mounted usbs.
It came with “the link” that I bought a while back from PHREAKMODS. Not sure if they still come with it or if you can find someone to make one for you.
I have some clear ones that are etched to cover the open area only.
+1 for the TE2 Type-N metal panel!!
Just want to thank Jasen for making such awesome stuff. Finally hooked up the aux panel I bought and it turned out great.
Is there an eta for the te2 type N? Because like… you know… I want one, lol
I’ll be opening preorders shortly.
Right on. I’ll be opening my wallet when you do 
Everyone should check out my Twitter poll if they are interested in the TE2 Panels. I want to focus on the most needed so that I can get them squared away before I shut the shop down later this month. Check it out here: https://twitter.com/JasensCustoms
Jasen
@“Jasen Hicks” is only temporary or will you be closing up for good?
Just got some artwork finalised for my VLXs and I’d like to order, just order normally?
Well I caved and just ordered a 6 button replacement for my VLX! 
Artwork has been created by RageousX and it’s by far the best replica Vewlix I’ve seen (which ironically is on an Astro City layout haha - still deciding which one to do first, but I will have another 3 to do over time :))
I know, I said I wouldn’t post it until @“Jasen Hicks” was done @RageousX, but it’s so damn good that I had to post it!
I present to you:
Hayabusa VLX
http://i.imgur.com/CiNEag9.png
Kuro VLX
http://i.imgur.com/HrXpvh5.png
Diamond VLX
http://i.imgur.com/YB9AxPb.png
And of course the OG VLX (this is actually an improved one to match the other VLX artwork from Hori, not sure why they decided to change it after the OG was released)
http://i.imgur.com/zNgm56I.png
I’m still deciding which one to do first… Hayabusa for my current gen VLX, or Kuro to go on my OG VLX so I can get that Vewlix L look (my favourite of all Vewlix’s)
Great look! Can you tell us please what buttons are you using here?
Closing down temporarily for deployment.
Where’s you get those switches from? I’m assuming those are like the car aux switches.
Also, in for the TE2 N layout!
Then, I guess I’m adding a thanks for your service to the other thank you!
I just put “lighted 19mm momentary switch” into Amazon and saw what showed up, which ended up being these guys. I mostly bought them cause they came with a resistor and had a wiring diagram… which I still screwed up. Thought I wired the LED to only light when pressed, instead they only turn off when pressed.
I use the SPDT version of those switches to select PS4/PC on my FC padhack, really like them.