www.JasensCustoms.com - Panzer Fight Sticks, ADCAP SuperGuns, EZ MODs, and more!

CMonster1221 · 2016-04-08T23:03:54.000Z

If there was enough interest here would you make a run of 10? No way I can commit to that many unfortunately.

Jasen_Hicks · 2016-04-08T23:16:35.000Z

No problems. I just need to make 10 to keep it economical for everyone.

CMonster1221 · 2016-04-08T23:55:33.000Z

Posted in
forums.shoryuken.com/discussion/119257/sega-stick-appreciation-thread/p6

Hopefully some others would be interested!

Jasen_Hicks · 2016-04-09T03:00:08.000Z

Madcatz TE2 before and after… I’m really enjoying creating as many mod parts for commercial sticks as I can. Working out plexi details now.

https://scontent-lax3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/12321350_2000404266852252_1889077239023120117_n.jpg?oh=c881a2272665a3c94a03e1ec3c4a4ce5&oe=57B79E06

https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/12512739_2000404273518918_8686465229247215002_n.jpg?oh=e5ac43ed766c2fd05aa9335ea4634cb1&oe=5781772D

Darksakul · 2016-04-09T03:27:37.000Z

Jasen_Hicks:

Madcatz TE2 before and after… I’m really enjoying creating as many mod parts for commercial sticks as I can. Working out plexi details now.

https://scontent-lax3-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/12321350_2000404266852252_1889077239023120117_n.jpg?oh=c881a2272665a3c94a03e1ec3c4a4ce5&oe=57B79E06

https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/12512739_2000404273518918_8686465229247215002_n.jpg?oh=e5ac43ed766c2fd05aa9335ea4634cb1&oe=5781772D

Already 100% better

aszyd · 2016-04-09T06:05:27.000Z

Wow!!!

I will point some people from the trading outlet here. A few of them want the Noir layout MCZ panel, that I can only find in stock in Japan. This should suit them nicely!

ShinMagus · 2016-04-09T09:02:29.000Z

Hmmm… I imagine there must be at least a little demand for this, but since there’s no available solution people just let it go: what about a case designed for a UD-USB & PS360+ (or other controller PCB, like the Brook UFB) combo? Nice for using controllers from the Xbox360/PS3 era onwards on older consoles or, alternatively, for providing a very flexible solution (an array of possible target platforms) to people with platform-specific sticks at tournaments.

Jasen_Hicks · 2016-04-09T11:18:49.000Z

ShinMagus:

Hmmm… I imagine there must be at least a little demand for this, but since there’s no available solution people just let it go: what about a case designed for a UD-USB & PS360+ (or other controller PCB, like the Brook UFB) combo? Nice for using controllers from the Xbox360/PS3 era onwards on older consoles or, alternatively, for providing a very flexible solution (an array of possible target platforms) to people with platform-specific sticks at tournaments.

That would be super easy Though, probably not super inexpensive either. If anyone remembers the MK48 SuperGun case I did a small version of that could work nicely.

Phreakazoid · 2016-04-09T20:37:33.000Z

ShinMagus:

Hmmm… I imagine there must be at least a little demand for this, but since there’s no available solution people just let it go: what about a case designed for a UD-USB & PS360+ (or other controller PCB, like the Brook UFB) combo? Nice for using controllers from the Xbox360/PS3 era onwards on older consoles or, alternatively, for providing a very flexible solution (an array of possible target platforms) to people with platform-specific sticks at tournaments.

This is largely what the PileBunker was going to be. It’s not inexpensive, but fairly flexible.

NicVic · 2016-04-10T06:24:22.000Z

I would buy a JCC project box with standoffs.

EndRant · 2016-04-10T16:29:34.000Z

in for a te2 type n panel. never tried one and I just wanted the panel so I don’t have to buy a brand new stick. I just hours mess around with the persona template to be compatible with the type n layout.

ShinMagus · 2016-04-10T17:52:06.000Z

Jasen_Hicks:

That would be super easy Though, probably not super inexpensive either. If anyone remembers the MK48 SuperGun case I did a small version of that could work nicely.

Around how much do you mean? US$ 30? US$ 40? US$ 50? US$ 60? US$ 80? US$ 100 ( :o)?

Phreakazoid:

This is largely what the PileBunker was going to be. It’s not inexpensive, but fairly flexible.

Why “was”?

VanIceL · 2016-04-12T08:33:56.000Z

Hey Jasen,
Would the QanBa Q4RAF Stick Bag or RYU FS Traveler? fit the PSF2.0?
What’s your opinion on both?

Jasen_Hicks · 2016-04-12T09:05:34.000Z

The cost of a project box with the proper cuts and such could be as low as $30 if enough were needed/bought. I doubt it could be that low though being such a niche project.

As for the bags, no those are too small for the Panzer 2. I tried at SCR 2015 and the traveler was just a smidge too small.

STEZO_ONE · 2016-04-12T12:45:47.000Z

Picked up a wide body case from @“Jasen Hicks” Facebook sale. He said he wasn’t sure if it was wired up or not but for the price it didn’t really matter to me. Got the case and it came with a jlf and 6 sanwa buttons. Opened the case up and FOUND A PS360+ in it!! Very happy with my purchase. This thing is beast. This is definitely the heaviest and sturdiest stick I own.

Before pic : [url=https://flic.kr/p/Fhj134]

After :

Jasen_Hicks · 2016-04-12T16:41:07.000Z

Man, that ended up being a KILLER deal! I’m sure some people are going to be very jealous of that deal!

CMonster1221 · 2016-04-12T18:31:38.000Z

def in for a te 2 type-n panel when they are available. Looks like no interest in the custom sega panels unfortunately…

Phreakazoid · 2016-04-13T01:55:06.000Z

ShinMagus:

Phreakazoid:

This is largely what the PileBunker was going to be. It’s not inexpensive, but fairly flexible.

Why “was”?

Haven’t moved the project forward since probably October, for a variety of reasons. Was originally designed to use 1st party and licensed 3rd party. Probably could revamp it for a brook UFB extremely easily though.

FreedomGundam · 2016-04-13T02:56:13.000Z

STEZO_ONE:

Picked up a wide body case from @“Jasen Hicks” Facebook sale. He said he wasn’t sure if it was wired up or not but for the price it didn’t really matter to me. Got the case and it came with a jlf and 6 sanwa buttons. Opened the case up and FOUND A PS360+ in it!! Very happy with my purchase. This thing is beast. This is definitely the heaviest and sturdiest stick I own.

Before pic : https://farm2.staticflickr.com/1553/25782490023_e07048f521_b.jpg

That’s an amazing score!

Funny thing about that stick, and @“Jasen Hicks” is probably more suited to answer: what’s with the odd positioning of the right-most face buttons, and the really odd centering of the stick + buttons on that one?
Just kinda curious.

Jasen_Hicks · 2016-04-13T04:14:41.000Z

FreedomGundam:

STEZO_ONE:

Picked up a wide body case from @“Jasen Hicks” Facebook sale. He said he wasn’t sure if it was wired up or not but for the price it didn’t really matter to me. Got the case and it came with a jlf and 6 sanwa buttons. Opened the case up and FOUND A PS360+ in it!! Very happy with my purchase. This thing is beast. This is definitely the heaviest and sturdiest stick I own.

Before pic : https://farm2.staticflickr.com/1553/25782490023_e07048f521_b.jpg

That’s an amazing score!

Funny thing about that stick, and @“Jasen Hicks” is probably more suited to answer: what’s with the odd positioning of the right-most face buttons, and the really odd centering of the stick + buttons on that one?
Just kinda curious.

The Widebody was special. I wanted to have a lot of room between the action buttons and the start/select/home trio on the right. It looks a bit weird with the button plugs in it than it actually is in person.

That K4 button… oh man. This was the FIRST widebody ever made and I completely overlooked the spacing on the last button and went 36mm instead of 33mm (I think thats about right) and it ended up centered. I kept it for darn near 3 years before I got rid of it as a constant reminder to check, double check, and then check one more time before pressing go on the make it button.