I had a couple to start the morning. Ill add some back and get them made up this week.
Gracias seƱor! You really are da man!
Order made for all the cool VLX things youāve created recently! 
Hereās some more tech I am testing that should get people excitedā¦ Between this, the HRAP, and VLX the EZ MOD system is making the Brook UFB very accessible.
Hi again Jasen, Iāve messaged @d3v regarding a possible commission for artwork for my stick so, once I hear back from them Iāll put in my order for my stick asap. Is there a cut off point, regarding you stopping taking orders for built Panzers? I donāt want to miss out.
Nope, no time frame limit. I have a certain number I can do total between now and when the pre-order period is up. Its about 75 total sticks, 10 of which I allocated for building.
Hereās the policy on shipping for everyone, its been a hot topic as of late: http://www.jasenscustoms.com/Shipping_ep_44.html
Hey everyone!
Jasen I sent you a PM regarding an idea I have. Iām not sure if you do completely custom sticks based on customer ideas or if you modify your existing designs based on just the panzer box, but Iām hoping you can help me out. Thanks even if not!
Just placed my order! Does gamefinger/Spark CE require any extra work?
I would tie into the 5v spot used for the Joystick LED to power the optical board on a PFS2.
Thank! Reading a previous post you made, itās a .100 molex connector right? I see that the power connector for a Spark is simply 1 wire, then would this do http://www.amazon.com/Sunkee-Dupont-Jumper-Female-Connector/dp/B00CGWVFWW ?
Sorry this may seem like a basic question. Iām fine with soldering, but iām 100% clueless about wiring/connectors and l donāt want to guess. I want to make sure I have everything I need before the pfs2 ships.
The connector for the RGB(5V)(GND) is a molex 22-23-2051 (a 5 pin kk connector). If you remind me closer to May 1 when I expect to start shipping everything I can make you a cable that plugs in here and then make a 4P JST connector that clips onto the Spark. I have the pins and the $350 crimper to make it pretty quickly. It requires a 3P housing on the Spark, but the 4 will work fine and just over hang a pin. I have a ton of the 4P JST SH connectors on hand so I might as well use them 
Will do!
type n panel for te2 next please. people want it, donāt know how many but I think itāll sell. specially since madcatz never restocked theirs.
Apologies for the delay in placing my order for a built Panzer stick, d3v is currently working on a design for a wrap for me.
Regarding the template for the Panzer wrap, does the final wrap / cover include all 4 sides for the stick or would I have to request for the various sides of the stick / casing to be painted a certain colour?
It wraps the top, front and back only. The two sides and bottom are the color of the case. Right now that is black or white. I am. It offering other colors than those to keep logistics (and cost) manageable.
Anyway I can buy the Panzer OG? I know is retired. I want the all white case
I retired the PFS-OG, I will not be making any more of them. The Panzer 2 is available in all white during this preorder period.
Finished a few things up tonight includingā¦ HRAP4 Panels. The case really limits what layouts can be used on these sticks. There is a lot of plastic to contend with. I fear that only Vewlix 6 and 8 will be the only panels I can offer for this due to the cases limitations. I guess the bright note is that you can really customize it with cool artwork and get a nice new metal panel out of it.
And for Arcade Fans, got this SuperGun wrapped up for a customer
Grabbed a 8 button metal panel for my vlx from the scratch sale. The mark on the bottom (inside) was so small and minor. Great deal! Also picked up a replacement aux panel. Wish I grabbed one of the white ones as well when they were available. Great quality!
Hey Jasen I see you still have sega panels available on your site. Is it possible to get one like you did for arcade UFO preferably a 1l 6b astro layout but with the 3 24mm start buttons like you did for them. With an astro city overlay?
They ordered 10. So, yes, if you need 10 as well.