Custom Powdercoat is a possibility. I have to check with the shop to see what they use and how much of it makes sense. Sometimes they want me to buy enough to do 40 sticks ($250 worth of powder)… not sure if we can get smaller sizes for less cost.
As for the torture test, I wanted to take a MadCatz stick and beat it up with a hammer then do the same with the Panzer. I’d just feel bad destroying a stick for publicity. I like when everyone talks nice about the PFS and recommends it to folks 
Any chance of a 7 button vewlix without paying for custom?
Boy do I have a deal for you… if you like Blue and Black. I have ONE 7 button vewlix from when I first made these. Its blue on top and black on the bottom with DB15 and Neutrik. Its sandtex finish so no artwork… but it can ship today.
Jasen
I’d worry about the floor before I worried about my Panzer if dropped.
I cracked a tile by dropping one… it was not fun ripping it out and replacing it before I had to move out 
You had me all the way up to here
Hmmm…what about contacting Sanford and Gootecks and have them test the durability of Panzer Sticks?
How much to get one of those skull ball tops design possible on bat top?
I recently ordered a Panzer case and can not wait for it to get here. I can barely sleep.
Haha!
We haven’t started the run yet, so I don’t have a frame of reference on how much the battops would be to get done. Since we have to do about 100 at at time I am not sure that 1 offs will be viable options.
I’ll consult with Bryan about bat tops and their availability. Most of them have that textured finish which makes them unsuitable for this process.
Boom! Welcome to the family
This happened to me to near the front door. I just put a welcome mat over it. It’s been about 6 months since I moved out and the landlord hasn’t said anything. Panzer didn’t even have a mark on it…
Dont tell me i cant get the sickest ball top ever i must have one
I highly recommend these to anyone using a Panzer who sits it on their lap, makes it much more comfortable. They’re a few dollars at Walmart:
@PresidentCamacho I will actually do that. TY. The feet that are on it now are fine but those definitely look more comfortable when not playing on a table.
More awesomeness… some simple, some not so simple but time saving.
https://www.jasenscustoms.com/images/D/IMG_5643.png
Coming Soon… Panzer Specific Wiring Harnesses. They work with other stuff too though. High quality, lowest price possible.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10885458_1743153922577289_2489476761570777618_n.png?oh=c6a0b487c057cb8c66e930f8d45d74e2&oe=55400638&gda=1426566738_b78f327265e7f5e972a865e341b4fa98
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10696265_1743153929243955_1320062807301562131_n.png?oh=ab70ab370f47fb994458892290b1f1a8&oe=55446E49&gda=1430686402_a6ad8e8c294da4760fae0a7e22589b31
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10366322_1743153932577288_6123157349793310291_n.png?oh=33847d622c5da399eb152f068d39d50d&oe=54FEA9EB&gda=1425850208_70595b3cb406f484dcfa3573ee84286e
Haha! I could have used that harness a while back 
After all of these cool products Jasen, I expect a DB-15 to Cupholder Addon for the PFS. Gotta have a refreshment handy on those long sessions.
So how big is the wide body version of the panzer? Are we vlx sized? Bigger?
The WideBody is: 22.4" x 10.2" x 2"
The Hori VLX is: “Length 22.4 inches (570mm) x Depth 10.2 inches (260mm) x Height 5.5 inches (140mm - includes joystick lever)” (source: arcadeShock)
