Toronto blank box on sale

Tech Talk
1141

Design: Version 2
Name: Richard Ebanks- Rampage
**Location: **Cayman Islands
Primer: No
**# of boxes: **1 (will take 2 if available)
**USB: **4th hole, Cthulu
Plexi: Yes - I need plexi for as many boxes as you send this time, plus one additional for my current box (version 2).

Also, I want in for design 3…

Design: Version 3
Name: Richard Ebanks - Rampage
**Location: **Cayman Islands
Primer: No
# of boxes: 2
USB: 4th hole, Cthulu
Plexi: Yes, both.

1142

i’m down for one of each.

Design: Version 2
Name: wussmonster
Location: oregon
Primer: Yes

of boxes: 1

USB: none

Design: Version 3
Name: wussmonster
Location: oregon
Primer: Yes

of boxes: 1

USB: 4th Hole

1143

design: version 3
name: Martin Herring - UNW4NT3D
location: UK
primer: yes

of boxes: 1

USB: 4th hole

1144

Hi Joe,

Design: Version 3
Name: Lee Yiu Joe - alvaradoc
Location: Hong Kong
Primer: Yes please

of boxes: 2

1 X USB: 4th hole, cthulu
1 X USB: 4th hole
Plexi Bottom: Yes please

1145

Design: Version 2
Name: Mo - thedon777
Location: Oakville, Ontario
Primer: Yes

of boxes: 1

USB: 4th hole, cthulhu
Plexi: No

1146

Design: Version 2
Name: leo - merutin
Location: GTA (pickup preferred)
Primer: Yes

of boxes: 1

USB: 4th hole, cthulhu

1147

withdrawing my order

1148

Another option came up for me, but man these cases are sweet!

1149

I don’t really need another joystick right now, but the fact that it’ll be bigger (so I can fit another PCB in there) is really attractive. I almost missed the boat last time, so I figure that by the time this order is in and goes through, I’ll want the box.

Also, any chance of black primer? The white looked really good, but I was too lazy to paint it. I think a lot of us just left it primed. An option for a different color would be great (again, because I’m lazy).

Design: Version 3
Name: Dave Wong -Dave Wrong
Location: Saskatoon, SK
Primer: Yes

of boxes: 1

USB: none
Plexi-bottom: Yes (if you’ll be making ones for Ver.3)

1150

Hey Joe, you can update your first post with my finished stick. Thanks again
http://img123.cocoimage.com/thumb/983042948.jpeg

1151

After 5 days of scouring the net for a custom box, I finally found one I like. :slight_smile: Please put me in for 1.

Design: Version 2
Name: Keith - kraxx23
Location: Vancouver, BC
Primer: Yes

of boxes: 1

USB: AXISdapter / 4th hole
Plexi-bottom: Yes

1152

cant wait to see the redesign!

1153

Design: Version 3
Name: Tres - Hangul
Location: Columbus, Ohio 43232
Primer: Yes

of boxes: 1

USB: 4th hole, cthulhu
Plexi bottom if available for redesign

1154

a. What type of drill bit do I have to use for plexi\acrylic glass?
b. What size of nuts & bolts do I have to buy for JLF sticks? How long?

1155

I’ve used a spade bit for plastic before. Hole saws are better.

As big as will fit inside the mounting holes. Length depends on the thickness of your top board and the type of mounting.

1156

I’ve plans on buying a drill set to put holes on my acrylic glass and for the mounting plates of my stick. I can only see black & decker’s… drill bits for hss, masonry, wood, glass & tiles, which one should I buy?

And also how will I know the size of the screw to use based on the size of drill bits?

btw, thanks for the help, Green :slight_smile:

1157

joe how much is the box??

put one for me,

Design: Version 3
Name: Jerome - mirana
Location: Melbourne, Australia
Primer: Yes

of boxes: 1

USB: 4th hole, AXISdapter
Plexi bottom: YES

Can you include USB plug and USB cable(1 ft for use with axisdapter) as well?Thx

1158

The box itself costs 80 CAD, I don’t know what the other extra stuff costs.

1159

that just fit my budget.Thanks and cheers:rofl:

1160

better check with Joe on shipping cost