Toronto blank box on sale

catchafire · April 15, 2009, 1:36am

I was gonna order from there…

Dave_Wrong · April 15, 2009, 5:21am

Okay. After lurking this thread for the last week, I bite. I’ll sign up for paypal.

Sign me up for the next batch.

Name: Dave
Location: Saskatoon, SK

of Boxes: 1

Primer: Yes

System_1 · April 15, 2009, 10:08am

I’ve seen pics that looks like the LS-32-01 would fit (the one with the S-plate and wiring harness), am I just mistaken?

System_1 · April 15, 2009, 10:18am

If you check the first page of this thread you can see that the box is using the Seimitsu LS-32-01. It also fits Sanwa JLF’s.

Refraxion · April 15, 2009, 10:28am

What is the shipping price to Edmonton, AB? I’m interested in a box.

System_1 · April 15, 2009, 2:58pm

Current status

New batch construction under way

30+1 available in this run

31 spoken for

0 left in this run

==============

Batch #2 buyers

Name: 1esproc
location: Toronto?
Primer: Yes

of boxes: 1

Name: Arnold - arn45
primer: yes
location: Toronto - yonge and bloor

of box: 1

Name: Anderson - goldenaustin
location: San Diego, CA
Primer: Yes

of boxes: 2

Name: Louis G. - Arr4ws
location: Quebec city
Primer: Yes

of boxes: 1

Name: Amir M5
location: Anaheim, CA
Primer: Yes Please

of boxes: 1

Name: Bess
Location: Mississauga, Ontario

of Boxes: 2

Primer: No

Name: Catchafire
location: Belleville, NJ
Primer: No

of boxes: 1

Name: Jeff B - breakyerface
location: Rochester, NY
Primer: No

of boxes: 1

Name: Minh - maoi
location: Montreal-QC
Primer: Yes

of boxes: 1

Name: Tracer1
Location: Singapore

of Boxes: 2

Primer: Yes please

Name: Dark Hai
Location: Daly City, California

of Boxes: 1

Primer: Yes

Name: Akochico
Location: Pleasanton, California 94588

of Boxes: 1

Primer: Yes

Name: Albert - Evelgest
Location: Cleveland, OH
#of Boxes: 1
Primer: Yes

Name: Calmbomb - justin
Location: Seekonk, MA
#of Boxes: 1
Primer: Yes

Name: Art - gts072
Location: Sausalito, CA 94965

of Boxes: 1

Primer: Yes

Name: Nick - Akuma 1980
Location: Winnipeg, MB

of boxes: 1

Primer: Yes please

Name: Luc - apex916
Location: Montreal

of boxes: 1

Primer: Yes

Name: Michael - Duals
Location: Canberra, Australia

of Boxes: 1

Primer: No

Michael - dancing_destroyer
Gaithersburg, MD 20878

of boxes: 1

Primer: Yes

Name: Jed - Chipsetjed
Location: San Diego, Ca 92127
#of Boxes: 1
Primer: Yes

Name: Josh - hadokn
Location: Castro Valley, CA, 94546
#of Boxes: 1
Primer: Yes

Name: Andrew - purbeast
location: Rockville, MD, 20852 USA
Primer: Yes

of boxes: 1

Name: wussmonster
Location: Oregon, United States

of Boxes: 1

Primer: Yes

Name: Kevin - Sauce17
Location: Halifax, NS

of Boxes: 1

Primer: Yes

Name: Richard - Rampage
Location: Cayman Islands
Primer: Yes

of boxes: 1

Name: Jeff - Jest
location: Hamilton
Primer: Maybe

of boxes: 1

Name: Dave - dol
location: France
Primer: Yes

of boxes: 2

Waiting list +4

Name: chris - chimster
Location: Richmond Hill

of Boxes: 1

Primer: Yes

Name: Dave - Dave Wrong
Location: Saskatoon, SK

of Boxes: 1

Primer: Yes

Name: PPPP - Patrick
Location: GTA

of Boxes: 1

Primer: Yes

Name: JP - RiceNoodles
Location: Stanton, CA

of Boxes: 1

Primer: Yes

-joe

System_1 · April 15, 2009, 3:52pm

Sweet.

System_1 · April 15, 2009, 6:51pm

I’ll put my name in too!

Name: PPPP - Patrick
Location: GTA

of Boxes: 1

Primer: Yes

catchafire · April 16, 2009, 4:55am

Random question, but will this case take a SANWA JLF with an S plate versus a flat one?

Thanks,

System_1 · April 16, 2009, 7:40am

http://www.gremlinsolutions.co.uk/gremimages/ls-32-01_super.jpg

edit… sorry i was having a brain fart last night… the case works with this LS-32-01 S plate

-joe

wussmonster · April 16, 2009, 8:12am

hmm. so it takes the above pictured mounting plate? i’ve got the plate from Modchipman’s site. doesnt look like that.

this one http://lizardlick.com/images/for_sale/joysticks/jlf_p1.jpg

nuropa · April 16, 2009, 8:17am

jlf flat plate works fine, i have it.

wussmonster · April 16, 2009, 8:27am

ok cool. was worried there for a second. thx.

beefenchilada · April 16, 2009, 9:14am

Are there any pros or cons with using the S-plate versus the flat plate? I assume the only difference is that the S-plate raises the shaft a little higher. Would that be the only difference?

System_1 · April 16, 2009, 2:57pm

I have having a brain fart last night…

the case was designed with

the JLF-P1 flat plate for the JLF

the SS S-plate for the LS32

I have not tried with the JLF s-plate but looking at it, it looks too tall to fit under the plexi glass

<-- NOT TESTED

-joe

System_1 · April 16, 2009, 6:30pm

Please put me down for the next batch as well.

Name: JP - RiceNoodles
Location: Stanton, CA

of Boxes: 1

Primer: Yes

System_1 · April 16, 2009, 6:47pm

As of April 16, 2009, there is no guarantee there will be a third batch. and the ETA for the second batch is next 1-2 week

=======

Current status

New batch construction under way

30+1 available in this run

31 spoken for

0 left in this run

==============

Batch #2 buyers

Name: 1esproc
location: Toronto?
Primer: Yes

of boxes: 1

Name: Arnold - arn45
primer: yes
location: Toronto - yonge and bloor

of box: 1

Name: Anderson - goldenaustin
location: San Diego, CA
Primer: Yes

of boxes: 2

Name: Louis G. - Arr4ws
location: Quebec city
Primer: Yes

of boxes: 1

Name: Amir M5
location: Anaheim, CA
Primer: Yes Please

of boxes: 1

Name: Bess
Location: Mississauga, Ontario

of Boxes: 2

Primer: No

Name: Catchafire
location: Belleville, NJ
Primer: No

of boxes: 1

Name: Jeff B - breakyerface
location: Rochester, NY
Primer: No

of boxes: 1

Name: Minh - maoi
location: Montreal-QC
Primer: Yes

of boxes: 1

Name: Tracer1
Location: Singapore

of Boxes: 2

Primer: Yes please

Name: Dark Hai
Location: Daly City, California

of Boxes: 1

Primer: Yes

Name: Akochico
Location: Pleasanton, California 94588

of Boxes: 1

Primer: Yes

Name: Albert - Evelgest
Location: Cleveland, OH
#of Boxes: 1
Primer: Yes

Name: Calmbomb - justin
Location: Seekonk, MA
#of Boxes: 1
Primer: Yes

Name: Art - gts072
Location: Sausalito, CA 94965

of Boxes: 1

Primer: Yes

Name: Nick - Akuma 1980
Location: Winnipeg, MB

of boxes: 1

Primer: Yes please

Name: Luc - apex916
Location: Montreal

of boxes: 1

Primer: Yes

Name: Michael - Duals
Location: Canberra, Australia

of Boxes: 1

Primer: No

Michael - dancing_destroyer
Gaithersburg, MD 20878

of boxes: 1

Primer: Yes

Name: Jed - Chipsetjed
Location: San Diego, Ca 92127
#of Boxes: 1
Primer: Yes

Name: Josh - hadokn
Location: Castro Valley, CA, 94546
#of Boxes: 1
Primer: Yes

Name: Andrew - purbeast
location: Rockville, MD, 20852 USA
Primer: Yes

of boxes: 1

Name: wussmonster
Location: Oregon, United States

of Boxes: 1

Primer: Yes

Name: Kevin - Sauce17
Location: Halifax, NS

of Boxes: 1

Primer: Yes

Name: Richard - Rampage
Location: Cayman Islands
Primer: Yes

of boxes: 1

Name: Jeff - Jest
location: Hamilton
Primer: Maybe

of boxes: 1

Name: Dave - dol
location: France
Primer: Yes

of boxes: 2

Waiting list +4

Name: chris - chimster
Location: Richmond Hill

of Boxes: 1

Primer: Yes

Name: Dave - Dave Wrong
Location: Saskatoon, SK

of Boxes: 1

Primer: Yes

Name: PPPP - Patrick
Location: GTA

of Boxes: 1

Primer: Yes

Name: JP - RiceNoodles
Location: Stanton, CA

of Boxes: 1

Primer: Yes

-joe

Dave_Wrong · April 16, 2009, 7:48pm

So, to my understanding, these boxes only support Sanwa screw-ins, but not snap-ins? How thick is the top? Is there a way to modify the buttons without touching the box to make snap-ins work?

Also, I know everyone hates on Happ buttons, but is the box tall enough for them?

Sorry for all the questions, I’m just planning on ordering arcade parts and the retailer I talk to only carries snap-ins and Happs.

Evelgest · April 16, 2009, 8:09pm

For snap-ins, you’ll have to drill grooves on the sides of each of the button holes. I believe there are pictures of someone who has done this already. You’ll have to modify your top panel.

gns · April 16, 2009, 8:26pm

Here you go. It is also linked in the first page.

Dremel mod to make snap ins work. You will still need 2 screw ins.

This box will NOT support Happ parts. Aside from the 2nd batch of sanwa/seimitsu Joe was in the planning stages of designing a happ box.

Confirm with him.