You don’t need an imp with a crossbone
So with the TE2 Crossbone, I can set some kind of soft-switch to switch between the 2?
Ended up ordering the FC4 from amazon. They are back ordered until August 1st so only a week or so. Yesterday they said 1-2 days to ship, and now it’s a week. I figure I might as well get it now since maybe the demand is going to rise as more people want to play SFV with a joystick lol.
Arcadeshock has them in stock right now.
and yes TE2 crossbone has a built in switch
Thanks! I’ll give it a shot. Btw, do you know any other vendors that carry imp v2 and have them in stock? I used to purchase them from focus attack but they are currently sold out and they don’t seem to have an ETA.
Yes that’s right no toggle switch, and fully wired. It’s got a 6 foot micro usb in the box but it’s interchangeable so you can put any length on it that you need.
Is there a reason to buy an FC4 over the P4 then? I mean, I’d rather not have a toggle switch in my stick tbh. I could even dual mod this to a PS360+ if I wanted to just for the extra 360 compatibility right? Also, is it possible to use two of them on the same PS3?
All ps4 controllers work on a ps3 without home with no toggle. If you don’t want to wire up or use the toggle switch on the FC4, then don’t use it. You’ll have the same functionality as the P4 or any other controller.
That being said, the FC4 is easier to solder to and you will always have the option later to use the toggle switch later.
No sense in getting the PS360+ for just 360 if you’re using a ps3/4 controller; just padhack a pad from Gamestop or cannibalize a TE.
Arcadeshock has them in stock right now.
and yes TE2 crossbone has a built in switch
Shipping kills it, it’s like $15 more to get it from there. Plus I have amazon prime and had $59 in amazon credit so it was free in a sense lol.
there’s no way shipping is $15 for one pad lol
there’s no way shipping is $15 for one pad lol
Cheapest shipping was like $14 and some change, I added it to cart and everything and went through checkout process till it shows prices.
EDIT:
$13 and some change - $13.06 to be exact for USPS standard post. Fedex overnight is $87 lol.
should email Vinh directly; he could fit that in a single priority box
Maybe next time!
Yeah I’m not in a hurry or anything so no rush, estimated arrival is next wednesday. I still need to order the crossbone TE2 also. Hopefully the beta gets delayed beyond that lol.
@dehumanizor62 the PS3 can use two P4 controllers at once
Pad hack newbie here do I need to remove the black suff on the FC4 pcb before I solder on?
Pad hack newbie here do I need to remove the black suff on the FC4 pcb before I solder on?
Yes, very gently scrape it off.
Use the back, no scraping necessary
What kind of switch can I use for the PS3/PS4 selection switch on the FC4? I’m not sure if I can make a tiny enough hole in the case to fit the original switch haha.
What kind of stick do you have? Most of my mods I map it to LS on the TE
I have a VX-SA, would any of the turbo switches work?
Also, I looked it over I guess I can use a SPDT switch?
Or can a DPDT switch work with just 3 connected? And would the switch on the FC4 need to be removed for the aftermarket switch to work?