They are quite pink.
ya know!
I see. Well then how pink are the Pink Pearl Semitsus?
http://www.gamingnow.net/index.php?main_page=product_info&cPath=108&products_id=761
The pink definitely looks more noticeable. I bought some red Pearl Seimitsus and didnāt expect them to be that pink either, but it doesnāt really bother me.
Did you order them from me? It seems they are more pink now than before but I took this picture long time ago:
http://www.akihabarashop.jp/misc/PS14P11.jpg
http://www.akihabarashop.jp/misc/PS14P12.jpg
I orded from Gaminnow.net
On a different note, Iām thinking of picking up an LS-56 or two since shaft covers will fit them. Is that the tall Seimitsu joysick that feels closest to an LS-32, or would an LS-40 or LS-55 be closer?
If you like LS-32 then LS-56 is the stick for you I think. It is tight and fast to play with (and fun ^_^).
Also measurements are here:
Sorry if this has been answered, but I tried searching this thread and couldnāt really find an answer.
I was wondering if I were to drill a 30mm hole for a JLF stick, would the dust cover be large enough to cover the hole when the stick is in use?
I know the dust cover is roughly 38mm, but I wasnāt sure if thatās a large enough of a diameter. Also, Iām sure this plays a small factor, but the stick is mounted at the standard height of 23-24mm (from the top panel to the bottom of the ball top).
Hmm, Iām not sure if this helps you much but I did a measurement on my TE. The washer moves about 7mm on the radius from highest top position to lowest bottom position.
edit: changed 4 to 7
You need a 24mm hole, not 30mm hole.
Here you can have look to reference is 30mm hole is cool for Dust Disc.
24mm hole with 37.87mm Dust Disc.
24mm hole with 31mm Dust Disc.
So, what do you think?
I have an LS-40-01 I want to put in my TE, I donāt have a harness or anything for it, what do I need to buy to throw it in?
Thanks. This sorta helps. I know its suppose to be a 24mm hole, but that guy I asked to cut the plexi for me drilled the hole as 30mm. Hopefully the dust cover is large enough (even if barely), so that you canāt see any holeā¦
Flip the plug upside down.
I donāt need a mounting plate or anything like that to put it in? Just flip the harness upside down and mount it with that plate?
You need Seimitsu SS Mounting Plate.
The default RE Mounting Plate will make Shaft Height too short.
SS āSā Joystick Mounting Plate
That?
Yes.
I asked this in the newbie thread, but I think it got buried, and, well, now I think about it the question is better suited in this thread. Dumb me.
Anywho. Is it possible to mount a LS-32-01 in a HRAP3 (or any HRAP without the universal mounting bracket) using a flat mounting plate and the shaft extender? Or would using the shaft extender make the stick a little taller than what it should be?
Yeah, I have a stupid question. I donāt mind getting mocked for it, so long as I get the right answer to it as well. I was looking to replace the stock buttons on my HRAP3 with the Sanwa OBSF 30 buttons. What color in the Sanwa catalog is a closest match to the stock HRAP3 buttons and ball top? I donāt want to spend on a replacement ball top, and I donāt want the colors to be obviously mismatching.
I think it would be too long and odd to use, but yes itās possible.
The stock HRAP3 balltop is vermilion.