From what I’ve read, the art on the Panthera is actually glued onto the panel and must be removed via heat gun rather than being able to simply unscrew it. But underneath I believe is the same. Focus Attack sells replacement plexi for the Panthera and this image is in the install instructions:
Am I right in assuming that the screws that are labeled to be left in are the screws for the panel?
I’m replacing Atrox xbone pcb with Brook UFB.
Is there a pinout of 5pin-connector on additional pcb (where xbox home button is located)? I want to know which pin(s) are for ground and which one(s) for home signal.
Do I need other signals besides these two to enable home button functionality?
Having somewhat the same Issue. I’m looking for the layout to wire the LEDs. All I found in this thread is this picture,which is sadly lacking the information i’m looking for. But it shows the home button and the Gnd should be the pin above, which was connected to a white cable.
Edit:found out myself. see image above. Note that the 5V coming from the UFB are too much for the LEDs, so that resistors have to be used to reduce the voltage.
Hi I am looking for the razer panthera limited edition with sfv image of ryu and akuma
Where can I find one in retail shop around new york area? regular price 199usd is ok for me. I can’t seem to find info on retail store that sells one. all the search in google refer to online purchases
Thanks in advance
Hi everyone, I saw people looking for the xbox one atrox pinouts and I have this link if it helps http://i.imgur.com/zhnaGqr.gif
you can’t just buy it from Amazon? https://www.amazon.com/Panthera-Arcade-Street-Fighter-playstation-4/dp/B071J3ZVZZ
Thats the 360 atrox pinout
Unfortunately i live in a cheap apartment that does not have a lobby or reception, so am not able to do online shopping, or else I would have taken the offer from newegg since it also gives an extra copy of tekken 7 for free
Any idea on retail shop that sold one in new york?
Any Amazon lockers in your zipcode you could deliver them to?
Behold my MMA themed Panthera, the photo is from ufc 196 when Nate Diaz choked out Conor McGregor
https://preview.ibb.co/g5FUzb/24294412_10155885667380120_3851020830596069858_n.jpg
Hi all!
I’ve got the Panthera SFV edition and it’s great so far.
But there is one thing that bothers me. The quality of the Ryu and Akuma picture seems very awkward. It’s like it is of really poor resolution. It seems that it is the art style they wanted to go with it. I hoped to get a more sharper version of these great picture.
So I wanted to ask if it is normal or if every one here has the same bad picture?
Edit:
Here are some picture for you to compare.
https://imgur.com/y9gdSMJ
https://imgur.com/Jn9HcAu
https://imgur.com/sp7A9Bl
https://imgur.com/cbmpHPx
Also i have noticed another strange thing. What in the blue moon is this extra cable on the screw of my jlf sanwa stick? I have modded two madcatz sticks and a noname aftermarket stick and i never had more than 5 cables for my JLF Sanwa or other joysticks.
Here are the pics of the mystery cable
looks like a ground cable to me
yes, that’s a ground cable
It’s a ground cable, it often use when someone having issues with static messing with the stick.
It gives a path for all the static electricity to go (to ground) and not to anything sensitive on the stick.
I suggest leaving it in place.
WOW! I didn’t believe anymore to get an answer to my question =) Thx all!
I thought of that to in the beginning but then i thought why a ground cable to an joytsick? My other two fightsticks from madcatz doesn’t have one eather. But it seems i was on the right track 
Does some of you have the SFV Edition and can please compare their artwork with mines? It would let me sleep a little better XD.
Also i have new buttons and a new handle installed which i want to share with you 
Here you go!
I hope no one thinks rude of me cause i dare to modifiy these great special edition fightstick
Joystick and buttons modding is fair game.
I have a couple of questions about the Razer Panthera which I just received as a Christmas gift.
Does this update apply only to PS4 or does it apply to PS4, PS3, and PC? Here is a link to the update that was posted via twitter.
Also, when I have the switch set to PS4 and plug it into my PC, 2 of the buttons (triggers) are recognized by my PC as Z Axis instead of buttons. Therefore, these 2 buttons do not work in games. I’m using Windows 10. Is there a way to fix this?
My Panthera’s usb cable died and i couldn’t get a replacement, so I bought a brook UFB to replace the whole thing. I drilled out the usb passthrough for the neutrik unit. I also have the buttons and stick wired up, but I have no clue what to do with the cables on the touchpad/R3/L3 panel. Can anyone let me know what cables I need to reuse and which ones they are (preferably with a picture/s cause I can be kinda slow sometimes).
I heard it many times but why is so hard to get a replacement of the official cord?
I’m getting really nervous to break mines.
Its a proprietary connector.
