I guess some just got unlucky, in my area we are more then 10 who uses this stick never heard anything bad.
I can only review what I received and seen.
What I saw is that every piece of Razer tech I seen breaks, and the Atrox is not immune to that statement.
What I received is a case that prone to breaking with the smallest provocation.
Hi guys, I have a razer atrox xbox 360 and today it stopped working. I plugged it on my pc, hoping to enjoy some noobs matches and to my suprise, the fightstick has no energy, dead. I tried plugging it to another pc and an xbox 360, no luck. I donāt know what happened, if itās the cable or the board just fried. Does anyone know if itās possible to replace any of the two?
Thanks.
PS: I live in Portugal. This type of controllers are very rare.
Its most likely the cable. it has been known to break. If youre in Portugal youre gonna have a hard time getting a replacement from Razer.
You can either try to fix your existing cable or replace the connector with a neutrik and use a standard usb cable. search this thread for further info
360 razer? probably the connector.
cut the end of the cable, scoot back your PCB inside the case and solder the usb straight onto the board
Are there tutorials for that?
Go back though the thread
itās 4 screws, 4 wires and a pair of scissors.
Hi all 
Iām sure this has already been answered elsewhere in this thread but Iām a lazy noob soā¦
Anyone got the pinout for the 5 pin male connector on the XB1 atrox? Whoād have ever thought a usb cable would break? Razer doesnāt sell replacements. 
Any help would be appreciated, thank you.
Im assuming youāre going to remove it and hard wire the cable? You can solder directly to the board, which has the colors visible in the correct order.
Thatās plan B. Iād rather use the existing plug(s). I ordered a replacement set as the wire broke just after the stock molded plug.
Iāve had my 360 Atrox for a year and a half now without having any issues, i suppose i can consider myself one of the few lucky ones, so i bought the Xbox One version (50% discount) and this one comes with the cable issue fixed (with a new cable) and i couldnāt be happier with both . I leave here the recent covers i printed for both, itās the full Snk vs Capcom Chaos roster, i know itās an old, crappy game, but i like it 
http://i8.photobucket.com/albums/a26/Xercho/IMG_1285.jpg
http://i8.photobucket.com/albums/a26/Xercho/IMG_1287.jpg
http://i8.photobucket.com/albums/a26/Xercho/IMG_1286.jpg
Iām having hell of a time getting the wires off the buttons. on the te2 i had the clips were very easy to remove the wires from the buttons but on the atrox i canāt find it at all any tips? this is xbox one version
use pliers
there is no clip or pin or what ever its just flat i have pushed on both side and got indents in my fingers and hard as i pull they wont come up the metal over the gold connectors on the buttos them shelves looked pinched my lighting in my room sucks and its no better anywhere and my camera at close distance just makes it super duper shiny and canāt see the detail im talking about
my te2 was so easy that i could do it with jyst my thumb because the pin or what ever was super easy to touch came off like butter and ky but this shit i dont think can come off
So here is mine
friends guy who modded my sticks atrox
notice mine has no tabs
those are only to stop the wire from going to far when you crimp them.
mine wont come off dude literally
no holes in mine its literally flat i got two te2s and 3 atroxs sitting next to mine at the local arcade we all have failed to remove the wires and these guys get paid to mod everyones stick from button swaps to pcb soddering