This I was trying to avoid. Well…
On the other hand, is it possible to order a custom replacement panel for a Q4 RAF?
I’d like one with an astro/blast city layout
“Defender” QanBa Fighting Stick backpack
“Defender” QanBa Fighting Stick backpack
Is it possible to buy a replacement for the cable compartment hinge? Mine’s broken.
The same,i need to buy an ice blue cable compartiment hinge…?
Hello,
I’ve got a little problem with my Q4raf Qanba stick:
the LT/RT (black buttons) doesn’t work in Xbox mode (works Ok on PC mode).
I suspect a bad wiring:
http://img600.imageshack.us/img600/9774/img0110wp.jpg
http://img853.imageshack.us/img853/6301/img0111vq.jpg
If so, could you tell me how to correct this?
(I can take other pictures if you need).
Thanks in advance.
can i fit a Qanba Q2? and is Xiaohai and Dakou still sponsored by Qanba?
Hi guys, im new to modding sticks and i recently got Qanba Q1 and i am going to swap out the buttons and stick. I use this stick for not only fighting games but also of shoot em ups. I have read that a good stick for both genres is the SEIMITSU LS-58-01 and i also read some people mention that they “believe” this stick will fit as well as Sanwa JLF as long as it has a flat plate and a long shaft. I am just a little confused when it comes to different models like the JLF for example (TP-8Y-SK, TP-8YT). Really I’m just curious if i purchase one of these sticks, particularly the SEIMITSU LS-58-01 is that all i will need to swap it out, or do i also need to switch wiring or anything? I will be buying the parts from focus attack i assume and don’t want to leave anything off when ordering, so if i purchase this http://www.focusattack.com/seimitsu-ls-58-01-joystick-yellow/ is that all i will need to install it into my Q1 or will i need anything else to go with it. I really appreciate you guys time and help. Thanks
Is it easy to make the Q2 360 compatible? I want to get this stick, but I’m not sure if it’s worth it for me to make it 360 compatible
Thanks Qanba …
I received the package you guys sent and will definitely get the your new bag soon.
Hey Qanba, still enjoying the Q4RAF. But, my headset broke, and I’m trying to get a KMD 360 Pro Gamer headset to work. Is there adapter I can use because the plug doesn’t fit.
Hello Qanba representative,
are these marks shown on some of the promotional & unboxing pictures to be expected on all Q1 bodies, or these are only some unlucky ones?
http://i18.photobucket.com/albums/b144/Navetsea/q1-body_zpsa4a1ad8c.jpg
(seems like slight warping/sinking of material )
I have purchased it, and I already aware of these photos before making my decision so I will still be happy with it once the package arrives since overall design is beautiful
Hello Qanba representative,
About Qanba Q1.
could the artwork be replaced?
could you provide some sample artwork templates?
would there be plexiglass available for it?
Thanks.
Hey guys, bought a Qanba Q4, one of the Axises of the cord compartment door is broken, any solution? It’s so minor that sending it back to Arcadeshock is idiotic.
If the stick is still under warranty you shouldn’t have a problem getting a replacement door. I would email them about it.
so my Q1 arrived, quite happy with the pretty look , buttons are OK, the stick sounds squeaky sometime, perhaps a little dry, so I open it up add some nivea lipbalm as suggested in other thread, it works instantly, everything becomes smoother, hopefully it won’t have side effect in the long run but it is only a qanba joystick, and probably going to be replaced later.
http://i18.photobucket.com/albums/b144/Navetsea/q1mine1_zpsfff5245d.jpg
I’m also happy that mine doesn’t have those depression marks on the plastic I saw on several pics on the internet, the only small imperfection it has is a very slight dimple on the plastic edge on the bottom left area, which is very minor. it is a shame the ports cutout on the front is left unfinished like that, eventhough this is meant for PS3 and PC, I would still appreciate an extra USB port and a headphone jack since I use it on PC.
I also hope the plexi was designed simpler, so a replacement would be easier to make.
Hello, I have owned a qanba q4 limited edition ice blue for about 2 years now, and recently my board has been acting funky.
I would plug it in and it would magically work on the 360, but when I plug it in my ps3, a lot of the times I get a “a unknown usb cord is detected”.
Any fix for this?
EDIT: Just checked, even on ps3 switch, I can plug it into my pc and it will work everytime, and it’s not just messing up on my ps3.
Checked, works on every xbox and pc, it even works on pc while being on “ps3 and pc” mode.
Faulty wiring?
My Q1 LS-32, Sanwa 30mm’s and a red 24mm
without replacement acrylic panel, the only thing I can think of is getting some smoke clear buttons and have some kanji / chinese characters printed to decorate the plungers to make it more seamless with the rest of the style. I made some small round black stickers by using paper perforator/ punch to patch up all those metal inserts that is showing inside the transparent plexi all but one on the Q1 logo on the bottom left corner, much cleaner black looking now.
http://i18.photobucket.com/albums/b144/Navetsea/q1mine2_zpsdf2d21b1.jpg