The NEW Official Arcade Stick Art Thread NO IMAGE QUOTING!

There’s a TE-S size on Tek-Inno!

http://www.tek-innovations.com/arthobbies/?loc=products&cat=1&subcat=&item=30

That’s an exact replacement for it.

Here’s for just the art: http://www.tek-innovations.com/arthobbies/?loc=products&cat=1&subcat=&item=30

There should be a template in the front page that covers a regular,extended,and full panel. If you have a te-s stick and you put on a regular template your going to have a lil gap thats about 1cm unless you have a bezel. Now if you apply an extended template it’ll cover the lil gab cause it’s intended to go on with out a bezel. Now if it’s a full panel temp it’ll cover the te-s without a problem.

All the templates should be in the first page and yes arthongs templates are accurate If your template is smaller then that it needs resizing. By reading your response it looks like you want your to cover the full panel like the te-s art does i’am i right? if so this is the template you need

http://www.tek-innovations.com/arthobbies/downloads/Art%20Hobbies%20TE%20Full%20Panel%20Template_Kinkos%20Ver.psd

dude can i get a psd of that?

Get rid of the image quote ^^^ D;

http://img.booru.org/SRKsticks//images/1/92d53531d1db62ba9f98c0444a7b79aea1d3863f.jpg

My first

Great artwork! But Morrigan looks like a madman o_O;;

I really hope you have clear buttons for that, you’re covering up the face. Better yet, make it a 6 button stick.

I may be beating a dead horse w/ a stick, but the last revision I have in mind:

V1: http://i77.photobucket.com/albums/j67/NY_Assassin/LGA%20Panel/LGAPanelUnfinished.png
V2: http://i77.photobucket.com/albums/j67/NY_Assassin/LGA%20Panel/LGAPanelUnfinished2.png
V3: (V4 w/ smaller Button Bits)
V4: http://i77.photobucket.com/albums/j67/NY_Assassin/LGA%20Panel/LGAPanelUnfinished4.png
V5:

http://i77.photobucket.com/albums/j67/NY_Assassin/LGA%20Panel/LGAPanelUnfinished5.png

  • Enlarged the Button Bits (Ala D3V’s suggestion
  • Added a line background to fill empty space. Brush courtesy of Axeraider70’s Dimension Brush Set. ( http://axeraider70.deviantart.com/ )
  • Made the Sacred Diagram in the back a bit more vivid

I think I’m finished with this one. I’m still nitpicking, but it may be for absolutely nothing if I can’t progress. I might be printing this one.

BPunk, I’m liking that No More Heroes art there.
D3V, I support that stick art! I even got that as my background on my PS3 when I stream Mega Man Legends.

I did the same thing you did

Kept making small changes to a template

Jdm told me “you have to let go”

He was right about that

Laugh.

I just got my TE, the BlazBlue one, and I knew instantly what I wanted for my art, so I set to work.

http://i.imgur.com/Zg8g5.jpg

I thought I’d throw it on a mockup to see how it looks too.

http://i.imgur.com/s8Bud.jpg

Overall, I’m pleased with it. I wish I could use the new Ultimate MVC3 art for Deadpool and Wolverine though. Maybe I’ll wait. Thoughts?

? is the balzblue stick a TE-S?

the blazblue stick is a TE stick similar to the round 1 or round 2 sf4 sticks. It doesn’t have the slim sides or full art panel like the TE-S.

Hey guys I updated my stick’s art… here’s what it looks like now:

Old stick art made on Splashup

New stick art made on Photoshop using Art’s TE-S Template

Still having a tough time learning how to use photoshop… Any suggestions???

I only used the TE-S one because I planned on getting a full plexi-top from Arthong and I couldn’t make the other mockup one work for myself. The color is white if it matters.

Anyone know where I can find the art from the Blazblue TE btw (preferrably a full panel version)? Been looking for it forever, especially the background.
I saw someone posted something pretty similar in the imageboards, only difference being that it had Hazama in it, so the art should be floating around somewhere…

I tried recreating ti as much as i could, you can download the psd and take out hazama and add noel :slight_smile: and arrange the characters as close to what they looked in the original art. Other then that i can’t say i’ve seen a perfect replica of the original art :expressionless:

[S]That would be great! So where can I download the PSD?[/S]
[S]I don’t recall seeing a download link for it on the imageboard[/S]

nvm, found it in your template thread. Thanks a lot![S]
[/S]

Ok, I’m pissed now.

TE Extend:

http://i77.photobucket.com/albums/j67/NY_Assassin/LGA%20Panel/LGAPanelTEExtendPreview.png

SE:

http://i77.photobucket.com/albums/j67/NY_Assassin/LGA%20Panel/LGAPanelSEPreview.png

(I just caught the Fightstick text being off center w/ the Panel and the Dustwasher circle was on. Shifting the Text and Hiding the Dustwasher circle.)

I love the hell outta the TE Extend version so it pained me to shift everything around for the SE for my stick… I need to get a TE Case and Transfer the guts of my SE into it!

Still, I’m happy with the overall. I wont be able to see Petra’s Corkscrew hair, what can a guy do? Resizing the vector doesnt help for jack!

anyone have a kraylix temp?

Here’s what I’ve done with your template so far KaboXx. Swapped the original characters out for the Murakumo units.
Its a bit more crowded than the original but I’m loving the way it looks. Too bad Lambda doesn’t have a sealed form, she kinda stands out from Mu and Nu.
Think I’m gonna send a print order tomorrow, unless anyone has any tips for making this even better.

V1

V2: upped the saturation for more vibrant colors

Final version: lowered glow size on Lambda
http://i17.photobucket.com/albums/b71/Inferno187/blazbluetempFPeditMurakumo3.png