One of the first reviews on there says that the device isn’t able to stream because it records video as a “.ts.” Is this guy just…wrong, or is there an easy way around it? @_@ I appreciate the help, doood.
Well, it is generally streamed in the same manner the Happauge HD PVR is, in which you capture a screen region in Xsplit from the included capture program’s preview. If you were to purchase this card, I could instruct you how to do so.
If that isn’t something you’d like to do, the internal(destop only, connects via PCIe) version of this card will be able to stream normally.
The desktop version of this card can be found here:
http://www.newegg.com/Product/Product.aspx?Item=N82E16815100049
As I said, it requires a desktop, and it needs to be decently spec’ed, however, it is over $50 cheaper. I am not aware if your PC can use it, so you should make sure you have a proper slot before purchasing one. However, this is the card of choice for many and the HDMI port can connect to HDCP enabled sources if you use the proper driver.
=D Well that sounds excellent. I’m going to ask for this for the holidays then. I’ll hit you up for some advice, but that makes it sound pretty easy. Capture card brings the stuff to the computer, Xsplit catches the on screen video then throws it up onto a streaming site. That sound about right?
Yeah, pretty much. Honestly, if you follow the Hauppauge guide, located here, but use the software with this card instead of the hauppauge software, and you should be fine.
Thank you so much for the quick, easy help. I really appreciate it.
Edit: Actually, as one last question can you explain the function and use of a splitter?
What kind of mic’s and camera’s do I need to buy? I would like to have a player camera and speaker camera.
For video, Webcams are the easiest option – go with HD and run them at 720P (even if the camera is 1080P, most perform better at 720P; considering this is probably the resolution you’ll be capturing at, it’s easiest to run the stream with one source resolution in mind). I use Logitechs (specifically C910’s and C510’s) because they’re also Mac compatible, but getting them working properly with widescreen in Wirecast in Windows is pretty much impossible in my experience, and they have to be adjusted every time I open XSplit. I’ve heard that the Microsoft LifeCam models are pretty good, but I have no experience with them personally.
For microphones, it depends on how you want to set it up and how much money you’re willing to spend. Do you plan on using a mixer? There’s a fair amount of information in this thread and others on how to set that up; I’d recommend you do some reading. For getting started, a pair of relatively cheap, but durable, general purpose microphones (I’ve had great luck with these Shures, they’re workhorses) will get you far. Those, plus a couple stands and pairs of cans for the commentators will be a nice set-up.
I have a problem that is pretty much infuriating me to no end.
I recently bought an HD PVR to record my gameplay matches for tips/critique and installed it today, when I got it in the mail.
More specifically, its the HD PVR Gaming Edition.
My problem is that when I try to record gameplay, I get these moments when I’m watching the match on the tv where there is no sound.
After I stop recording and review the footage I just captured, I find out that the moments with no sound weren’t even recorded, so often it’ll show someone in the middle of a blockstring and then skip ahead to a big K.O. on the screen. I don’t have any idea why this is happening.
I’m recording PS3 gamplay.
My computer specs are
OS: Windows 7 Home Premium 64bit
Mobo: Asus P8P67 Deluxe
Processor: Intel i7 2600k
RAM: 8 GB
Video: NVIDIA GeForce GTX560 Ti
I’m not sure what is going on as I’m very new to this.
Can you try an alternative recording program?
Nice PC by the way, I would love to have one that awesome.
Actually, I turned everything off overnight and went back to it in the morning and then everything went perfectly. Guess I needed a hard reset or something.
Now I’m having problems with rendering captured game footage (it is taking over 24 hours to render 15 minutes of match replays), but I’m not sure that belongs here. If anyone knows where it is supposed to be posted, let me know.
if you’re using my setup that’s described in that guide, then the splitter is necessary if you’re trying to stream/record while playing. What the splitter does is splits the single Xbox/ps3 hdmi signal 2 ways. One end goes to the recording device and the other straight to the monitor that you’d be playing on. The reason you want to split the signal is that the hd pvr causes a bit of input lag when being ran from the console through the pvr. So the splitter allows you to bypass straight to the monitor for playing.
also to clarify, make sure you get a distribution amplifier. A passive splitter will degrade the signal and may even cause lag as well. Over HDMI an active amplifier is required or you will lag for sure.
What program are you trying to use to encode it?
Sony Vegas Pro 11.
I actually looked online and other people have been having the same problem with the same i7 processor that I have.
Maybe I should revert back to 10, but 10 doesn’t have the GPU capabilities for rendering that 11 does, which is the whole reason why I got it.
Any chance you could point me in the direction of a good one? @_@
Is the HD PVR the only USB 2.0 HD capture option? I’m looking for a capture device for my laptop, so I won’t have PCI Express.
You can find the splitter that I use (no noticable lag)here on my guide for streaming with the HD PVR.
If anyone with Behringer 802 mixer experience can help me, that would be great. My problem is that I’m trying to use my computer headset (3.5mm jacks) as microphones. I bought 1/8 to 1/4 adapters to convert my headset/microphone to fit the 1/4 input jack on the mixer, but I can’t get a signal from my headset microphone. I get audio coming through to my headset when being mixed through the mixer using the same adapter. I’m beginning to think that it won’t work this way. Anyone have any insight on my problem?
Edit: Nevermind, I found out why it doesn’t work. Apparently plug in mics are powered by your computers sound card. That puts a real damper on things.
Also, Figured I’d go on here before I went to Ebay. I’m selling my Hauppauge HD PVR. If you want to be able to record games in full HD, this is the right product for you. Hook your Xbox 360/PS3 up to this baby via component and plug it straight into your computers USB jack. I’m selling it for 150. These go for about 180-200 bucks on Amazon and Ebay. It’s in great condition and I’ve never had a problem with it.
The only reason I’m selling it is because I’m upgrading my recording equipment. I got a new desktop, so I’m going to buy an internal capture device. If you have a laptop, this is the way to go. There aren’t that many HD recording devices that are compatible with laptops. I’ll ship it for 10 bucks. PM me if you’re interested.
Well, there is another option, but I honestly do not think it would remotely be worthwhile. You can purchase a PCI-E breakout box that attaches via an express card slot. but they are generally fairly difficult to lug around and are geared towards professional usage. I’m not a big fan of these, but they are an option. I’d personally just buy the PVR if I were you.
What do you guys think is better for streaming/capturing, Mac or PC? Getting new laptop and trying to decide. Just got my HD PVR and my laptop died the same day.
You have more options on PC, hardware and software wise