There are no announced date for the release of the PS360+
Prototypes were sent out to select people for testing but some of the boards had issues.
If there was a defined date I would said sure, can you wait X amount of weeks?
Paewang PCB also suppoerts PS3 and Xbox 360 from 1 board
I’m in the same boat. I’m just gonna use w/e is available at the time. If the PS360+ isn’t available when I’m ready, I’ll just be using a chimp/fightpad setup. Paewang’s are so expensive from etokki.
Out of the box PS360+ will only support PC, PS3, 360 and PS2. So you will have more functionality from the MC board if you pair it with a 360 board because of the extra supported consoles. If you want Auto Detection you can get that by pairing the two boards with an Imp V2.
If you feel comfortable with soldering, I see no real reason to wait for the PS360+
Since all informational updates on the PS360+ have become non-existant you may be waiting a very long time. I would go with MC Cthulhu and ImpV2 if you are building from ground up. If you have access to a MadCatz TE 360 board I would go with Toodles TE Kitty.
Sorry jdm, I haven’t seen that forum, I was referring mostly to the seeming lack of info on this forum and that Jman of Focus Attack has said he’s stopped receiving updates about a possible release date.
ok so i do not want to wait for ps360+ to come out without temp pcb. should i just buy Toodles Cthulhu Multi-Console PCB for now. and once ps360+ is out i can dual mod it with cthulhu? so i can use it for older console and xbox360 and ps3?