Rollie Electronics - Rollie Translucent Pushbuttons 24mm or 30mm $1.00 each

Tech Talk
1541

so no answer on ETA? I might be moving soon, so I’m hoping to get the board from you before I move.

1542

I should receive some eta today.

Ponyboy

1543

Flash 1 Boards will be finished on Tuesday. I will be shipping the new boards out to the people that have bad boards in their possession. After you receive your board kindly return the bad board(s) to me by 1st. Class Mail. Before you ship them contact me at john@rollieelectronics.com

Sales for new Rollie Flash 1 Kits will resume on Tuesday March 6th.

Thank you,

Ponyboy

1544

Just curious. I know the kit comes with 2 extra springs, but which one is closest to the original Flash1 spring? I realize it’s suppose to be a little stiffer than the one inside the regular JLF to compensate for the lack of microswitches.

1545

The black spring would be the closest.

Ponyboy

1546

New boards shipping tomorrow. After they ship I will send out the tracking numbers.

Thank you all for your patience.

Ponyboy

1547

If you do have a bad board please contact me ASAP.

Thanks,

Ponyboy

1548

All the people that needed new boards they were shipped today by UPS Ground from Happ Controls. If you need a tracking number please let me know by sending me an e-mail at john@rollieelectronics.com

Rollie Flash 1 Kits are Back in Stock.

Ponyboy

1549

How do you put the flash in a Madcatz WWE brawl stick?

1550

i dont think you can. i believe the SE’s have a slight different variation of stick. probly need to swap the stick out for a jlf first.

someone do correct me if im wrong. ive only messed around with my friend’s SE. not sure if they changed it

1551

You can put a TP-MA into the stock joystick of the brawlstick with no modification, so unless there is a drastic size difference with the Rollie Flash-1, I don’t see why it wouldn’t work.

Still, I think I’d rather spend the money on swapping the stick out with a JLF.

1552

yo john, i sent a email saying i wanted a tracking number. didn’t get any tracking number yet. thanks!

1553

i just got my tracking number. woot!

1554

Im sorry let me elaborate,. I have a jlf in there now, Im wondering is there anything special I have to know like hooking up the 5v. If its more than just swapping the pcb please let me know.

1555

just have to connect the 5V wire to the red wire on your usb. easy as pi

edit: lemme be more specific.
yes you need to swap out the pcb with the switches under the restrictor plate.
if the pins are facing the same direction, you can just plug in the existing harness.
THEN you connect the 5V to the red usb.
easy as pee.

1556

Ponyboy

Are you selling the Sanwa 1 springs??? I am interested in getting the springs. XD

1557

So I have to cut open the usb wire to do this?

I there a thread or a post that show this? I dont want to clog up the thread.

1558

i know it sounds intimidating if this is your first outting but its really very simple. 5 minute job this, or less.

check this:
http://forums.shoryuken.com/t/the-how-to-mod-your-sfiv-se-fightstick-faq/55867page-33

that thread may make it more complicated than it sounds.
i say keep it simple. solder the red 5V wire to the point where the red usb wire connects on your main pcb.

follow the usb cable from the outside of the stick to the end point circuit board its connected to.
the red wire from the usb thats connected to that point, thats where you solder the 5V wire from the flash.

1559

check ur email ponyboy.

also i think im gonna order more rollies.

1560

Has anyone received their new boards yet? Just curious as to whether things are looking good.