Paradise Arcade Shop, LED Joysticks, Buttons, Mods and more

[MacGrub3r7]

outstanding, i appreciate the quick response bud.

[PlayDoh003]

No worries, armi… I’ll definitely be ordering again, so I can include an etched washer in there. Just cuz I have an idea doesn’t mean that I actually have an artwork file ready to deliver, lol!

[wigsplitter]

Armi I see you restock on the IL-Lumination RGB’s but are those the IL1 or IL2 (you showed earlier) and you just have not change the pic.

thanks

[shichi]

Fat soft silencers are cut, for 30 and 24mm buttons, original silencers are done for 30 and 24mm buttons also.

I saw the original silencers for 30mm and 24mm. Just waiting on the 30mm new thicks. I think I’ll be getting 32 of those.

[deaded_by_panda]

Should I be getting an email or something once my order has shipped? Been about 2 days and nothing was sent to my email.

[armi0024]

Armi I see you restock on the IL-Lumination RGB’s but are those the IL1 or IL2 (you showed earlier) and you just have not change the pic.

thanks

IL-lumination stock is now all IL-2 I will update the pics asap

Fat soft silencers are cut, for 30 and 24mm buttons, original silencers are done for 30 and 24mm buttons also.

I saw the original silencers for 30mm and 24mm. Just waiting on the 30mm new thicks. I think I’ll be getting 32 of those.

I cut the new thicks, 30 and 24mm, I will make sure Susan posts them today.

Should I be getting an email or something once my order has shipped? Been about 2 days and nothing was sent to my email.

Panda, you should receive a tracking. Everything up until yesterday has shipped (unless you received a back order notice), all orders from yesterday are packed and will go out today, remember, it’s only 3pm here, plenty of time to hit the post office

[Kensumitsu]

Im still desperately waiting for that Sanwa Star Top to be available!

[navetsea]

Hello armi0024, how is the status of my order #007089
few days ago it has error when I checkout with Paypal on the site, but after that I have successfully paid the invoice that was sent to my e-mail with paypal button.
thanks

[GeorgeC]

The LED’s on that pinball machine look nice!

Reminds me of the videos I’ve seen of LED set-ups on the Polar Lights 1/350(?) USS Enterprise (original movie series, NOT the revamp!). These are the huge 6-foot(?) model kits that cost just under $80 I think. The saucer section alone is 3-feet in diameter. A number of the guys have LED set-ups in the shuttle bay. They pulse like the pinball board to “guide in” the shuttles! That’s of course, for the modellers who opt to have a shuttle bay that can be exposed to view.

Then again, I’ve never seen a model that doesn’t look 20 times better with well-down LED set-ups.

[armi0024]

Hello armi0024, how is the status of my order #007089
few days ago it has error when I checkout with Paypal on the site, but after that I have successfully paid the invoice that was sent to my e-mail with paypal button.
thanks

If it didn’t go out today, it should go out tomorrow. Susan had some printer issues today, HP told her we had a virus they could fix for 200

The LED’s on that pinball machine look nice!

Reminds me of the videos I’ve seen of LED set-ups on the Polar Lights 1/350(?) USS Enterprise (original movie series, NOT the revamp!). These are the huge 6-foot(?) model kits that cost just under $80 I think. The saucer section alone is 3-feet in diameter. A number of the guys have LED set-ups in the shuttle bay. They pulse like the pinball board to “guide in” the shuttles! That’s of course, for the modellers who opt to have a shuttle bay that can be exposed to view.

Then again, I’ve never seen a model that doesn’t look 20 times better with well-down LED set-ups.

We are very excited about these leds, hopefully we will have a working prototype at Evo…

[Darksakul]

The LED’s on that pinball machine look nice!

Reminds me of the videos I’ve seen of LED set-ups on the Polar Lights 1/350(?) USS Enterprise (original movie series, NOT the revamp!). These are the huge 6-foot(?) model kits that cost just under $80 I think. The saucer section alone is 3-feet in diameter. A number of the guys have LED set-ups in the shuttle bay. They pulse like the pinball board to “guide in” the shuttles! That’s of course, for the modellers who opt to have a shuttle bay that can be exposed to view.

Then again, I’ve never seen a model that doesn’t look 20 times better with well-down LED set-ups.

I helped someone with an Imperial Star Destroyer that was almost that size with LEDs. OMG the thing is a beast.

[shichi]

Any idea idea as to when the red 0.5mm oversized actuators will be back in stock? I just noticed they’re out of stock and I’ll probably need 4. My order will probably be around $75 once I get everything I need haha

[armi0024]

Let me check into it. We so many requests to do them in delrin I have those running but I’m not sure if I had the aluminum ones in production.
-Bryan

[armi0024]

Just wanted to share these amazing ball tops we are looking forward to adding to the store!

Make sure you connect to facebook and like these!
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/p480x480/922994_476194542450189_452816101_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/p480x480/1003989_488132941256349_37538360_n.jpg

[armi0024]

New Crown shafts for Japanese Compatibility, please vote in the poll

New shafts for Crown Joysticks, Japanese part compatibility

We started adding Crown joysticks and buttons to the website about two weeks ago, and thought we would ask people what they want to see. We’ve already ordered some new shafts (we won’t tell you which :slight_smile: ) but please help us figure out what else to add to the store!!!

[PinoyPryde]

Clear mesh balltops? Nice!

[PlayDoh003]

Oh wow, they look amazing! I may have to get one in purple to switch out every now and then with the Purple aluminum balltop I just ordered from you guys!

[Bigkilla]

I’ll be picking up one those blue mesh ball when it comes out!!

[armi0024]

They are pretty sweet, we’ve started our contest for products descriptions. I’ve decided our product descriptions need some help So if you want a chance at a $5 credit, with no minimum purchase, go hit our facebook page and write a description for the new Paradise Twist. We will pick the winner tomorrow!

Paradise Arcade Shop

our goal is to start posting a new product each day so if you are motivated these can add up quickly, and we are not limiting the number of times someone can win… yet

[armi0024]

Sorry, I’m bored today The new plungers are in and should be for sale tonight. These black aluminum anodized button caps snap on and replace the caps on your OBSC buttons…
https://lh6.googleusercontent.com/-UVabIBKkquQ/Ub0qURvPFxI/AAAAAAAAHkY/4pt89Q2Hlcs/w697-h672-no/IMAG0416-1.jpg

What fun could we have with a laser now?