Lol i don’t know what else to say, it doesn’t even pick up PC mode anymore. The xbox guide button just stays lit up until i unplug it. Its the same for PC and Xbox. 
You didn’t really answer my question though:
*So are you unable to re-flash the 3.2.0 firmware? You do this by extracting the archive, holding START when plugging it in and then running the update_firmware_168.bat file. *
Does it take the firmware flash or give you an error in the cmd window?*
*
gives error in cmd mode, device not found
Alrighty, shoot me an email, I’ll get you set up with an address to send the TEasy to so I can take a peek/fix it up. clayton@phreakmods.com
I can get it back in the mail within 24 hours if I’m not swamped.
[LEFT]Did the S version sell out or does it just not exist anymore? I was about to pay for a TEasy Strike but I don’t think I can use it.[/LEFT]
im getting the same problem as nubtub now
Unfortunately they did sell out, I didn’t expect it since last time around it too much longer to sell the S versions. Getting parts to restock soon here, just been super busy with other stuffs.
We conversed over email right? If so, I sent you an address to send to for fixing/replacement.
Aww okay. I’ll make sure to keep checking back.
Have any T-Easy strikes in stock, and will they work on an S pcb? Wanna find out if they will fit a SFxT Pro stick? LMK 
Hey Phreak, I have a friends stick here that he put a TEasy-Strike in and it seems to have died in the last week. I’m getting zero response off of my computer from the TEasy-Strike. 360 PCB is fine, but absolutely zero response from the TEasy. Tried from the punch terminals as well as physically soldering to the points on the bottom. This is my first time dealing with one, are there any trouble shooting steps I should be following? I can’t think of anything else, board just seems dead.
why does it seem like my teasystrike s is the only that has lasted since i bought it?
^ mines worked flawlessly also when I got mines when phreakazoid released the teeasy and dual strike combo. no hardware problems or software problem on my chun li te-s.
Not at the moment, sold out faster than I thought I would. Gotta give me a bit of time. The PCB in the SFxT stick is identical to the chun/ssf4 sticks but the amount of room in it probably won’t allow for TEasy usage without heavy dremel work or moving the boards to a different location altogether :/. I got a look inside of one this weekend.
So 360 forced mode works, but PC/PS3 modes do not on PC? Does it function on the 360/PS3 systems or yield similar results.
I would start by trying to re-flash the firmware, let me know if the firmware flash goes OK. I linked to it a few posts up.
I have a ton of customers without issue (many of which were seen this weekend on stream at FxS in chicago), nothing is perfect, but any problems customers may have I try to support as quickly and painlessly as possible.
Nope, Computer(s) don’t see it in Bootloader mode.
And yes, 360 passthrough works, 360 force works, I can’t get any response out of the TEasy.
What’s the error you see in the CMD box when you try to flash? If it’s HID device not found shoot me an email and we’ll get it swapped out for you asap.
so i finally got a chance to use my teasy (3.2.0) on a ps3 and all my buttons were all over the place (IE… RB would be square the ps3, and i didnt have a start button) today i finally found a utility for the mac that lets me test the controller and all the buttons are functioning fine according to the gamepad tester, any idea?
On PS3, try and hold LK when plugging it in, see if that fixes the button mix up.
Has anyone had experience putting one of these into a WWE Brawlstick yet? I’m super-interested in a dual mod but I’m not sure if the inside of the case is exactly the same as the SE, and not sure if I can use the normal TEasy Strike or if I need to wait for more of the S version.
Thanks to alex_000 for pointing out that the meta button was not working in PC mode with firmware version 3.3.0. I got it fixed in 3.3.1, get it from the Dual Strike page.
Hey I just ordered a TEasy Strike but I’m an idiot and didn’t specify that I needed a TEasy Strike S. Is there a way that I can change my order?
edit: resolved