k. i jst dont want my stic k to explode cuz i forgot to hold down HK. cuz holding down a button is something easilty forgettable lol. but anyways. your product is awesome. ive bought mine along time ago. evereytime i bring it to tourneys, im surprised that they didnt know there was a solderless dual mod option!
I’m holding LK and it doesnt seem to be picking up PS3 mode. I’m using game controllers for Windows 7
PS3 Mode does not work on PC, just the Console.
It is how to get Automatic Detection to work.
Oh, I see. Thanks a lot guys!
hold MP for xbox mode… ssf4AE for pc works so much easier with 360 controllers
so i have this teasy for about 2 months now but just today i try to connect to a ps3 and it wouldnt work now i tested on the pc and the pc cant detect it anymore. i was just play it on the 360 and now i just tested it again and all the light flashes for a second and just shuts off but it wont detect either.
Try to re-flash the firmware, directions are in the post-install instructions on the TEasy Strike section of the site.
my computer cant detect it so i cant update it. do you mean just updating the firmware??
yeah, as in hold START while plugging it in, then running the correct .bat file
Let me know if that works out for you, if not we may have to do a quick swap out.
yea i tried that already its not detecting it at all
Shoot me an email, probably just do a quick swap out and have you back up and running as fast as the mail can carry a new board to ya.
anyone know how to get added to the email list to get a teasy strike when the new shipment comes out? about to get a 360 te
so my teasy started malfunctioning again it connects to the pc but wont re-install the firmware. for some reason when i force it on the pc as xbox controller the stick wont register but the buttons will not sure whats going on
Shoot me an email it’s easier to get a hold of me, sorry for the delay on response but any update on this? Functionality of other modes, etc?
if i use a teasy strike on a madcatz blazblue stick, will it work properly? or by the blazblue layout. i know in xbox mode it will be fine with the button layout but what about non-360 mode??? dumb question but i dont have a board to test this out with.
You need the TEasy Strike S.
And all TE PCB have the same order.
I know because I have Dual Mod a lot of TE.
-facepalm- i should of waited because i was in the process of cracking her open and long and behold the pcb is the same…just button layout on the template is different thats all.
Hey there, I’ve been having small issues ever since I installed my TEasy Strike that have snowballed a bit.
Within a week of installing, after a long session of play, I would occasionally get an issue where all the turbo lights would turn red and the stick would become unresponsive, this was fixed by simply unplugging and replugging my stick in. Since it only happened after 3 hours + of play I didn’t worry too much about it.
After about a month though, it became more frequent, to where every session it would stop responding at least once. This last weekend, during a tournament, the xbox portion stopped working all together, the xbox dashboard light flashes once, but nothing else ever responds. The ps3 side worked fine for a few days before it started to have similar issues.
The ps3 side still works occasionally, but its beginning to suffer the same issues.
At this point I’ve flashed the firmware per the instructions on the front page, and I’ve re-seated the boards a few times to assure they were lined up properly.
I assume the next step is to try it with a different usb cable, are there any other tips? Has this happened to people before?
@whitebudda
That’s…weird. Can you post up pics of the install real quick just so I can see if there’s something a bit off? All angles if you can, including the front punch terminals.
The 360 disconnect is somewhat normal, the TE PCBs are kind of notorious for doing that on 360 and it usually means it’s time to replace the board. What is funky to me is that you mention it disconnects on PS3 as well. On PS3 does it do the same thing where it becomes unresponsive and the lights all glow at once, or does it just come up as unknown on the PS3?
How is the functionality on PC, do the forced modes work at all? HK for PC, MP for 360?
I’m at work so I’lll take some of the pics this evening. I can say the pc mode works fine if i just regularly plug in or hold down HK, but if I hold MP down it gave an error that ‘usb device is malfunctioning’
When the 360 functionality died during the tournament, we were a bit worried about the ps3 failing as well, and sure enough it did flash all the turbo lights once. I didn’t test it much past then as we decided to stop using the stick at that point, but I’ll test it a bit more extensively.
Don’t suppose you’d know where I’d buy a TE 360 pcb?