Got it fitting the Wii stick, still getting the EX2 you were looking for, I should have it up tomorrow.
Sup fellas,
As promised here’s my finished stick :razzy:
First time dremeling and soldering I think I did an alright job!
http://img197.imageshack.us/img197/3272/img00041201007202151.jpg
http://img715.imageshack.us/img715/6504/img00042201007202210.jpg
Now I just got to wait for my art template to arrive grrr…
Wrapped up the two TvC templates I’ve been working on, I’d appreciate a bit of feedback on these. I plan on printing them up soon.
@kitsunisan could i get those templates, im interested in the button part and the other lines that go with them (not the character art or the bg art)
@kenny what stick did you use?
also to anyone else…I am looking to either put in LS-33 or a JLF w/ HAPP shaft. Which would be easier to complete the mod on?
kenny_91 used Sanwa JLF Shaft and Sanwa Restrictor.
Everything else is stock.
You cannot use Happ Shaft with a JLF.
Does not fit or work with.
There are many ways to install a Joystick.
Here is one way for LS-33, doesn’t have to be.
Other ways have been shown in this Thread for.
http://shoryuken.com/f177/modding-hori-fighting-stick-3-a-136372/index31.html#post6252595
JLF can be installed many ways too.
http://srktt.com/namco
http://shoryuken.com/f177/namco-stick-appreciation-188312/index42.html#post8722318
http://arkadesticks.com/namcomoden.htm
http://pineconeattack.com/2009/03/07/how-to-mod-the-hori-ex2hori-wii-fighting-stick-with-actual-sanwa-joystick-and-buttons/
http://www.canonspike.com/Canon_Spike!/Joystick_Mods/Entries/2009/2/28_Hori_EX2_Sanwa_Upgrade.html
http://www.kowal.itcom.pl/ArcadeParts_pliki/modNAMCOen.htm
Each is different slightly.
And each has steps that are not needed.
Mix around to get the install you like.
the 4th JLF mod link that you have…would that be the same as the PS3 FS3?
Everything is the same.
thx jdm…found a great little tutorial on youtube by coverlesstech
i’ll finally be taking out the happ stick from my modded FS3 and put in a JLF 
is it just me or does the Sanwa JLF seem really long/sit really high?
Yes, that is what happens when installed into the Case.
Shaft will be shorter if use the stock Shaft with JLF.
so I’m ordering my JLF very soon and just wanted to verify that this Sanwa JLF-TM-8T-SK Joystick would be the proper one to get
also had a question to anyone that knows. is the JLF going to be longer than the stock happ stick(above the case)
I know how to make use of Wire Harness if you get JLF-TP-8.
But you can use JLF-TM-8 if you want.
Go ahead.
how about the one with the PCB?
and are you talking about the stick for the TEs that requires the harness?
There are eight wires on the Hori PCB.
You only need to use five.
So you can solder the Wire Harness to it.
and since this wasn’t answered in my previous topic…
does the JLF shaft stick out of the top further than stock happ?
Stock Joystick with sanwa bat top
Can I change the ball of the stock joystick to a sanwa bat top using the sanwa bat top adapter?
Thanks
sup fellas,
modded my second Hori FS3 this time with seimitsu parts.
http://img843.imageshack.us/img843/3186/hufeu.jpg
I’m having some trouble connecting my Sanwa stick with the main PCB. There is a 5-pin connector on the sanwa stick’s pcp, however the hori stick micro-switch pcb is connected directly to the main pcb. Can I connect my JLF with the 5 pin connector? Or do I have to do some modifications to JLF micro-switch PCB?
I would appreciate some help.
Edit: I want to connect the wire harness that comes with the JLF. If I can’t connect it with the harness, can I connect it similarly to the hori stick without doing modifications do the PCB?
The Hori Joystick does not have PCB by the way.
Just Microswitches along, no PCB.
There are eight wires on the Hori PCB for the Directionals.
You only need five of them.
Now, what do you have that is five wires?
Sanwa Wire Harness!
Bonus that it connects to JLF.
You so lucky.
Remove the eight wires from Hori PCB.
Solder on the Wire Harness.
Hori PCB goes like this:
Ground
Right
Ground
Down
Ground
Left
Ground
Up
You know what to do?