Korean arcade parts discussion

And where would I find those?

I didn’t feel that any were particularly better than the rest, they all felt very similar. Which is a given because they’re all revisions of the same stick. Helpme likes the v3 the most of course, and I’m quite partial to the kaze mod too. I do like the panasonic switches on the v2 though, and swapping the up switch isn’t a particularly difficult mod.

Yours is likely a v2 if it has Panasonic switches. I think the Helpme levers originally had red handles and then they swapped to purple after the v2s came out, so you can get v2s and v3s in purple. I’m not sure if you’ll be able to buy specific versions easily if you don’t live in/have a friend in Korea though.

Hmm Interesting, Since I just recently bought the kaze lever I can just switch the microswitches from it to the help me lever which then would make it like the Helpme lever kaze modded 309. Yes they are really pretty in purple, btw for some reason there’s one in blue, A few days ago Qudans mentioned on his stream he’s using a blue help me lever kaze modded, it looks really nice.

@stringfellow your best bet would be with a razer panthera:). Te2’s are too expensive and they don’t like ufbs with k-sticks. Etokki omni is the other but unless you get the spare Japanese plexi glass you can’t use the dust washer. M4 crews are too long if you use Japanese mounting plate so you’ll need shorter ones or just use washers. Other solution would be to swap mounting plate for korean one. The price between the panthera and omni is pretty close.

Hi guys. I’m new to Korean sticks, and I recently got an eTokki Omni.
I’m loving it so far, but after a few days of intensive play I think I’ve broken in the stick and it feels a bit too light now? It’s at the point where I have to consciously control my hand or I end up making unnecessary movement like pulling/pushing the stick all the way to the collar.

Anyways, I was wondering how long do rubber grommets typically last? I feel like if I broke it in that fast then not that long?
Also would switching to that medium grommet that eTokki sells might remedy my complaint?

Thanks in advance for any replies.

Just got my Panthera in today. Planning to drill a 35mm in it and put a Taeyoung Fanta in it (which is still in shipping). Anything I should know before I do it?

Just put together my golden crown mod in my panzer 3! Went with the green groument, hevey spring and largest actuator! I also picked up A3s I just dropped in. I haven’t played yet but I will give my two cents on it. I must say it feels amazing, night and day difference from stock! Here’s a pic.

Panzer golden crown mods https://imgur.com/gallery/lQLDC
[URL=http://s483.photobucket.com/user/hemi34/media/20170901_230040_zpsse0djjel.jpg.html]

is the golden crown going to be avaiable for retail soon? also does anyone have experience with the Infiltration K stick? I got a razer panthera so i know i have the space, but im torn between the Infil K stick and the Crown CWL-309MJ. The only review i saw for the Infil K stick didnt speak highly of it when it comes to 3-d movement games. But its literally the only review, on the demo unit which is different than the retail version. anyone wanna help

Got my Fusion V2 yesterday spent a solid 5-6 hours with it and cant really see why its so popular tried a fanta soft rubber with it still not to my liking. Going back to my golden fanta also paid £100 in total for that lever jeeez

@wazwuz can you put my name on the next batch of golden crown kit please

I still have few left in stock. PM me

It might sound weird, but overnight the stick has become a little more stiff and precise. Maybe it took time for the grommet and spring to settle properly.
In crown sticks a lot of people noticed that the force required to actuate different directions is not uniform. And it’s not only about diagonal vs single direction but ā€œleft vs right and up vs downā€. I had the same issue myself. It looks that the kit fixed the problem. All directions feel springy and uniform.
Waiting for Panasonic AM5s to arrive for my next round of feedback.

Sidenote: The only negative is the size of the dust cover. It would be perfect to cover the neck of a 309-help me, but it’s kind of small if mounted as standard japanese-stick dust cover.

thank you for your time sharing your experience. I hope the uniqe ā€œgearā€ shapped grommets distribute the tension evenly, especially for diagonals.
in your setup (clear grommet + 1mm spring) does make the spring more dominant, this is new taste for korean stick, what do you feel after trying this, can you share the advantages or disadvantages about this setup?
I really appreciate your tought. thank you.

@zero_requiem

I’d give it a bit more time the fujin v2 is definitely my favorite korean lever I’ve used. The stiffness takes a bit of getting used to but it feels far more responsive than both the taeyoung and myoungshin which I’ve used previously.

Diagonals in particular feel a lot cleaner. With the taeyoung I found I basically always had to hit the gate. I still do with the fujin but don’t need to. Certain things are much easier though like getting ws moves out of qcf crouch dash. With the taeyoung I’d sometimes get a f when releasing d/f but I can get a clean d, d/f everytime with the fujin.

Also I recognise your name from T7 ranked/ playermatches, small world lol.

Wow , I didn’t get all this when I ordered my Golden Fanta. This your answer with that octogate idea I had for ya? Your getting better & better. Plus what is that 3rd shaft? I only gotten 2shafts and if I recall you just made that actuator. No signs of a octogate yet? Keep up the good work.

@vash254 infiltration lever works very well with tekken . There was a mistake with my order so I didn’t end up getting the circle gate but I’m sure that the lever will be even better once it’s installed. Very hard to miss diagonal and kbd is a breeze.

@Rokwho that’s unfortunate that you didn’t like it. What is it that you don’t like about the fujin? Stiffness? Super short throw? The more and more I use it i find doing instant run with Dragunov Dragunov to be a little inconsistent because the switches are much closer together. Been playing mishimas a ton lately and out of my taeyoung, myoungshin, 309mj, infiltration, fujin i find speed in general plus CD to be fastest with fujin. Damn 100euros is a lot mine was about 100cad.

The Golden fanta project looks interesting!

my main problem with the fujin is the grommit i cant stand heavy grommits because i main mishima’s and spend a considerable amount of hours playing and over time my hands suffer i also dont ride the gate but its still to stiff that being said im giving it another shot with the softer fanta grommit
see how it goes every thing else is fine with it

just got my 309mj but they forgot to send me the conversion harness lol. I still put it in my stick just to see how it feels and I’m happy with it. hopefully I’ll feel the same when I can actually use it with a game, can’t wait.