So is it even going to be possible to update the existing firmware on these newer boards without using the share button? Are they looking at a possible recall to enable a firmware update?
Anyone know approximately how much actuation force is on the default directional sanwa buttons that comes with the hitbox?
Looking for something a little more sensitive, thanks!
Force required=/=Sensitivity, and youāre not gonna find anything lighter or more sensitive than OBSF buttons for 24mm buttons at least.
I already have a Hitbox, but I canāt get it to work with my Dreamcast. Do you have an extra Akishop PS360+ PCB that has the second highest firmware [L+R=N, D+U=U, and has the Dreamcast functionality, etcā¦]? Iāve tried to update it and canāt get it to update.
Also, does the PS4 version work on Dreamcast?
Has anyone converted a vlx to a hitbox setup?
go to the Hori VLX thread
Yes. There are definitely panel replacements for it.
I got my ps4 hitbox from hitboxarcade but windows says it doesnāt work on usb 3.0 ports, and my computer is only 3.0 ports. I tried searching for a legacy bios that might be disabled but no luck on that part. I ordered a 2.0 hub but if that doesnāt work am I shit out of luck?
answered on reddit
enjoy
can someone hook me up with a template with distances between buttons?
Iād like to cad from there and customizeā¦all I can find is .psd templates
so convert, measurements are the same lol
no measure on these .psd
window > show rulers
For those having issues with the triggers always being held, hereās some background and the fix:
For whatever reason, the breakout board used with the brook pcb inverts the signals for L2 and R2. I dunno if the resistors went bad or what but I ended up bypassing them and rewiring the 2 red wires to ground after I cut the trace to Vcc.
https://dl.dropboxusercontent.com/u/1570228/hitbox%20trigger%20fix.jpg
I applied this fix at AB7 so I donāt have the board in front of me anymore, but you can do what I did here (again, I donāt remember whatās what, so just do exactly as I did as well as cut the trace like I did).
Iām getting a URL signature expired on that last image Vicko.
Super excited to maybe have a working hitbox for weekly locals, if this saves me Iāll owe you big time!
Which wire is the trace to vcc?
Looking to purchase a Hitbox but wanted to know if post-June Hitboxes still have the 8min timeout problem. Asking here since the official site has had no update since July.
Iām going to assume yes on that one Mecha-Shiva, I bought a PS4 hitbox right at the end of june and was left waiting for firmware ever since.