** Focusattack.com fighting game store **

[RoyalFlushTZ]

For anyone who already installed their PS360 pcb, is it possible have a wire connecting the ground and home terminals to make the start and select button pushed together to register it as the home like the Mc Chutulu pcb?

Why would you need to do that when there’s already a home/guide button assignment on the PS360 PCB? Just drill a 24mm hole if you can and assign it that way.

If it’s possible, though, would you connect the start and select signals to the Home signal, too?

[Needlecrash]

Why would you need to do that when there’s already a home/guide button assignment on the PS360 PCB? Just drill a 24mm hole if you can and assign it that way.

If it’s possible, though, would you connect the start and select signals to the Home signal, too?

I want to have the start, select/back and guide/home buttons. I was playing Samurai Shodown on the PS3 earlier and it needs the select to get through menus and stuff.

[jmanDMC]

Guys,

I’ll ask Akishop about it. The install primer may have some information about this as well, but I need to review further. Friend on Twitter just told me that he was able to map the select, home and turbo functions into the select button. Might be possible to move home and turbo into Start, and keep select open.

I did. the select/home/turbo button are all the same button and it works just fine. its the select button next to the start button =)

For anyone who already installed their PS360 pcb, is it possible have a wire connecting the ground and home terminals to make the start and select button pushed together to register it as the home like the Mc Chutulu pcb?

Why would you need to do that when there’s already a home/guide button assignment on the PS360 PCB? Just drill a 24mm hole if you can and assign it that way.

If it’s possible, though, would you connect the start and select signals to the Home signal, too?

I want to have the start, select/back and guide/home buttons. I was playing Samurai Shodown on the PS3 earlier and it needs the select to get through menus and stuff.

[Needlecrash]

Guys,

I’ll ask Akishop about it. The install primer may have some information about this as well, but I need to review further. Friend on Twitter just told me that he was able to map the select, home and turbo functions into the select button. Might be possible to move home and turbo into Start, and keep select open.

I did. the select/home/turbo button are all the same button and it works just fine. its the select button next to the start button =)

I wish I can see the wiring of that lol. I’m not the best in terms of being techy lol.

So, how can you map the select/back and the guide/home functions into one button?

[blklightning21]

Hi all,

I spoke to a customer service representative regarding possible delays in shipments from Dec 15th. He mentioned two things worth noting: First, due to the holiday rush, it’s natural that some deliveries may be delayed, arriving up to 5 days after the order was shipped. Second, the delivery confirmation number isn’t a tracking number. It’s purpose is to verify that the package was actually delivered to your address. It will update on two occasions, when the shipping label was printed, and when the item is delivered.

For those who ordered from Focusattack.com on or before that date and still haven’t received your order by tomorrow or Friday, please contact me. I will ask them to document and follow up on those shipments.

Customer service is my highest priority, so I will make sure to address any issues as soon as possible.

On a good note, the Akishop PCBs and SINIX t-shirts arrived today! I will start shipping pre-orders in packs of 10 or more throughout the week.

Thanks!

Seriously J man these frequent updates are great. thanks alot for these they are very much appreciated.

I wish I can see the wiring of that lol. I’m not the best in terms of being techy lol.

So, how can you map the select/back and the guide/home functions into one button?

hey man i read through the primer a little bit. Looks like pressing start and select will not produce home like the cthulhu would this is programming that toodles implented and i dont think it was implemented in this ps360. if i am not mistaken wiring two commands to one button will result in the button with the higher priority coming out rather than actually serving two purposes. think of fighting games for a moment. when you press stong and fierce(mp and hp) the button with the higher priority comes out in this case fierce. so even tho u pressed both buttons only one command comes out. This is the same with wiring select/back to start button. the selection with the highest priority comes out which would be start if i am correct. This is how wiring turbo to the select button works, with this pcb. you lose turbo functionality in games but you are still able to switch between systems. However this is all speculation after just reading the primer for a little bit. I am not 100% as i have not received my board yet but will soon thanks to the jman. When i do receive my board i will try to make do a write up/tutorial on the board for js site or something if he does not already have one. like i said this is just speculation from reading the primer, so you need 3 buttons if you want start select/back and guide/home.

[jmanDMC]

Seriously J man these frequent updates are great. thanks alot for these they are very much appreciated.

Not a problem, and thank you for helping Sean’s Apprentice! It’s only right that people waiting for orders or could benefit from the news should get it. Speaking of which, here’s a update from Markman:

Fans of Madcatz’s Joystick guru Markman started a trend on Twitter called #markmanlegends. Hilarious stuff! For all the love, coupon code “FFH2010” gets you 20% off goods at http://www.madcatz.com/!

Just a reminder: The Last Minute Holiday Sale is still going til Saturday, Christmas Day! Check out the details on iPlayWinner.com:

FocusAttack.com - Last Minute X-Mas Sale! - iPLAYWINNER - FIGHTING GAME NEWS STRATEGY & MEDIA

Plus, here’s a photo of the newly-printed SINIX shirts! Just under $20 + shipping til Christmas!

Twitpic - Share photos on Twitter

Akishop PS360 PCBs have arrived and I’ve got a stockpile of these for a good while. Preorders aren’t necessary, so any new orders after this weekend will ship immediately. Just $44.99!

Thanks!

[Rice_Eater]

Dua,

Just got word from the other customer who mentioned his package arrived today. If you don’t receive yours by tomorrow, let me know and I’ll ship another to you right away. I value your business and will ensure your order is delivered.

Thanks!

That’s perfectly fine, I just want to thank you again for the wonderful support you’re providing. And if say I receive it after you shipped another copy to me, I’ll send the 2nd one right back to you. You have my word on that. And I will be getting another stick so expect to see another order from me soon. Thanks again and have a merry Xmas.

[jmanDMC]

Hey that sounds good. I’ll send an octo gate tomorrow and we’ll see if the post office catches up or not. Glad to provide good service to you - that’s what matters.

Thanks!

That’s perfectly fine, I just want to thank you again for the wonderful support you’re providing. And if say I receive it after you shipped another copy to me, I’ll send the 2nd one right back to you. You have my word on that. And I will be getting another stick so expect to see another order from me soon. Thanks again and have a merry Xmas.

[jmanDMC]

Orders are processing

Hey guys,

Just wanted to let you know that the SINIX shirts and PCB pre-orders are being packed and shipped over the next few days, starting with the earliest pre-orders. Please bear with us during that time - there’s a LOT of orders to process, which is a good thing. lol

You will receive an email once your order is packed and shipped. Any non-pre orders will ship 1-2 days from the order receipt date. If you have any questions, feel free to post here or send email to service@focusattack.com.

Thanks!

[Needlecrash]

Seriously J man these frequent updates are great. thanks alot for these they are very much appreciated.

hey man i read through the primer a little bit. Looks like pressing start and select will not produce home like the cthulhu would this is programming that toodles implented and i dont think it was implemented in this ps360. if i am not mistaken wiring two commands to one button will result in the button with the higher priority coming out rather than actually serving two purposes. think of fighting games for a moment. when you press stong and fierce(mp and hp) the button with the higher priority comes out in this case fierce. so even tho u pressed both buttons only one command comes out. This is the same with wiring select/back to start button. the selection with the highest priority comes out which would be start if i am correct. This is how wiring turbo to the select button works, with this pcb. you lose turbo functionality in games but you are still able to switch between systems. However this is all speculation after just reading the primer for a little bit. I am not 100% as i have not received my board yet but will soon thanks to the jman. When i do receive my board i will try to make do a write up/tutorial on the board for js site or something if he does not already have one. like i said this is just speculation from reading the primer, so you need 3 buttons if you want start select/back and guide/home.

Got it. I just wanted the select button since Samurai Shodown needs it for getting through online menus and stuff.

[Needlecrash]

Hey guys,

Just wanted to let you know that the SINIX shirts and PCB pre-orders are being packed and shipped over the next few days, starting with the earliest pre-orders. Please bear with us during that time - there’s a LOT of orders to process, which is a good thing. lol

You will receive an email once your order is packed and shipped. Any non-pre orders will ship 1-2 days from the order receipt date. If you have any questions, feel free to post here or send email to service@focusattack.com.

Thanks!

Can you say, AWESOME CUSTOMER SERVICE!?

I did already lol. Always good to be updated on the order status.

[Rice_Eater]

Hey jman, still no sign of it. But I’ll keep a eye on it of course.

[jmanDMC]

Hey jman, still no sign of it. But I’ll keep a eye on it of course.

Not a problem - I’ll re-ship your order tomorrow, and if the original part arrives, we’ll come to that. Hopefully the Post Office is just steeped in Santa hate mail.

lol

[jmanDMC]

Can you say, AWESOME CUSTOMER SERVICE!?

I did already lol. Always good to be updated on the order status.

Glad to provide it. A number of shirt and PCB orders went out this morning, and the entire lot of pre-orders will be shipped tomorrow. New PCB and shirt orders will follow. Thanks!

[davidphaight]

can i make a suggestion? selling the usbA TO USB B for the ps360 would be awesome…or all other wiring accessories. like quick connects,wire, pcb feet, terminal strips, basically everything we got to go to radioshack for, they are always freakin expensive and they never have half the stuff you need. it would be cool to have a one-stop shop for modding. once again thanks for the updates!!!

no rush but just curious…could you tell me the status on the ps360 i preordered?

[jmanDMC]

Hey davidphaight,

Can you make a short list of the items you use to configure the PS360? I’ll certainly look into it as I can understand where you’re coming from. I believe that is why LizardLick started stocking items like it.

Regarding your PS360 pre-order, I have a large number of them going out tomorrow and throughout the weekend. I will send you an email once it ships, which should be either tomorrow or Monday the latest. We’re packing all preorders now since the PCBs arrived yesterday.

Thanks for the suggestion!

can i make a suggestion? selling the usbA TO USB B for the ps360 would be awesome…or all other wiring accessories. like quick connects,wire, pcb feet, terminal strips, basically everything we got to go to radioshack for, they are always freakin expensive and they never have half the stuff you need. it would be cool to have a one-stop shop for modding. once again thanks for the updates!!!

no rush but just curious…could you tell me the status on the ps360 i preordered?

[Rice_Eater]

Yo Jman, if you’re seeing this don’t ship it. It’s extremely late(no fault of yours of course) but I finally got the octo gate. Again I really want to thank you for your great customer service and support and your willingness to send another free of charge. But it’s not necessary so I hope this gets to you before you do that. If it doesn’t, I’ll send it right back because that’s what needs to be done.

EDIT: Damn, I checked my email and see that you already sent it. Damn it Jman, why you gotta be so gdlk. If you were just a little less gdlk maybe you would have seen this message first LOL. Oh well, I’m sorry about everything, I 'll get it back to you and if nothing else, you’ve earned a loyal customer who will be ordering again soon.

[jmanDMC]

lol - Hey Dua!

It’s all good. I just got about 20 orders packed and READY to ship, so I haven’t actually shipped the order yet. Was just about to do that, so I’m glad to catch your message. Also glad that the order was shipped to you safely; guessing that the post office holiday rush was mad crazy this year.

To other who might see this, Focusattack.com is shipping pre-orders made up to Dec 20. All other pre-orders past Dec 20 and orders placed recently will be packed over the holidays to ship out this coming Monday.

Thanks for making this season a busy one for focusattack.com!

PS: Holiday Sale is still going on til Midnight tonight! Get a SINIX Ryu or Chun-Li shirt for just $19.99 until then. They’re really cute - your girlfriend wants one. I asked her. lol!

Yo Jman, if you’re seeing this don’t ship it. It’s extremely late(no fault of yours of course) but I finally got the octo gate. Again I really want to thank you for your great customer service and support and your willingness to send another free of charge. But it’s not necessary so I hope this gets to you before you do that. If it doesn’t, I’ll send it right back because that’s what needs to be done.

EDIT: Damn, I checked my email and see that you already sent it. Damn it Jman, why you gotta be so gdlk. If you were just a little less gdlk maybe you would have seen this message first LOL. Oh well, I’m sorry about everything, I 'll get it back to you and if nothing else, you’ve earned a loyal customer who will be ordering again soon.

[Rice_Eater]

I’m glad that’s the case. Best of luck to you in the new year.

[dreamakuma]

Hiya Jman,

I just got a ps360 Pcb preordered (wave two!) I got lucky and my future father-in-aw paid for it. I was wondering if you could PM me when it gets close to shipping. If so I’ll pm the details of the order.
I’d like to say your site looks slick, But I did think you had A LOT LESS buttons than you actually had. those prices are awesome too. I think I’ll stick with your prices on most things. Chad may have lost a customer J/K! I’ll still shop at lizardlick because he does have great service too and alot of US parts (I fix cabinets for a small living) but now I have a good alternative if I think LL is a bit high on prices or want to a personal project.

…Also Vanessa Statue almost got me in trouble with future wife…Just sayin…