No worry.
I know a Yellow will be sent to me separate.
Hotness. 
Glad to be of service! Weāre still going through growing pains as a new company, so itās good to hear when we get things right. Look for us when we release a new LED solution, plus add some new and worthwhile items to mod your setup. I gotta find time to mod my own stuff. lol
Haha - Iām sorry for the lack of UFS cards. My coordinator is still getting the hang of packing and shipping orders, so I had to limit the amount of stuff I ask her to include. Those will come back. I promise.
Weāre placing another order this week. My existing supplier was low on screw ins before, so I have to check again. Another big shipment of Seimitsus are potentially coming by the end of next week. This shipment will include the PS-14-Ks plus smoke balltops that were missing at the store opening.
To reiterate, weāre awaiting the upcoming release of the Akishop PS360+ Tri-mod PCB. Akishop states that the PCB will have new features and compatibility fixes. As soon as I receive word what those features are, Iāll let you know. These changes have prompted a new release date of May 30th. All pre-orders and defect-only returns (honoring 60 days from purchase) will receive the new PCB.
Also worth noting is Sanwa Classic Mesh LB-35 Balltops are now available. If you pre-ordered a yellow balltop, your shipment will arrive next week (those were mistakenly missing from our shipment, and should come this Monday). Again, this is the classic mesh balltop with tight mesh pattern, not the loose pattern found elsewhere.
Will keep you updated on new developments. Thanks for the support!
Yes, the yellow balltops will ship as soon as we get them, which should occur this coming Monday. Thanks for sharing the photos! 
jmanDMC, there is mistype on the LB-35-M page.
There is LB-25, which should be LB-35.
jmanDMC, have you seen the original LB-35-M from Sanwa?
Only two colors were made; LB-35-MP and LB-35-MG.
Very old, and not many people have them. :wgrin:
Super rare Strawberry/Cherry.
Mmmmmā¦Yummy! :lovin:
Ha! I bet not even Sanwa anymore!
These are what I was hoping for when they said they were bringing back the original mesh balls. I was ready to buy quite a few until I saw that they were the new design.
Just fixed. Thanks for the heads up.
Iāve never seen those before; of the ones I could get, unfortunately my supplier didnāt mention those before. Itās likely that Sanwa wasnāt remanufacturing them. Itās a shame, because the MR and MG are very sexy-looking balltops. Will always keep inquiring.
Right now, the falling American dollar vs. rising Yen is making it tough to buy Japanese import products. They cost a lot more than they used to, which makes it tough to keep the prices low. 
Since only two colors were made, it wouldnāt work well that I bought the absolute first version of the meshball. That and Sanwa wasnāt offering us those, so I couldnāt buy that version. The version we have is still tight pattern, the version before the most recent iteration that uses loose pattern.
I wouldnāt feel special if you are able to get some. :sad:
I must stay the one on SRK with that many.
Laugh.
jmanDMC, so when should I ask Trading Outlet for Loose Mesh?
I didnāt know that there were only the 2 colors made originally since I had only seen a couple pics before here. The OG style mesh balltops still look good though and Iāll probably be grabbing a few once the new PS360+ comes out. The storeās looking good with all the new products.
<---- Jealous of your special balls
The other colors you see in that picture was special made for AkihabaraShop.jp site.
Pink and Green were the only colors Sanwa made for Meshball.
I was gonna sell my PCB personally but since you mentioned donatingā¦for mine in particular, how about a $5-$10 donation to Red Cross of Japan or similar fund and Iāll send it out to whoever of the three of you guys PM first (jdm714, destinydmm, or Gummowned). A simple Email with confirmation of donation to the charity would be fine.
You knew about my donation to Japan with my mods?
I attended Fight For Relief on April 3.
Did Dual Mods there.
Donated all the money I received that day.
Exhausted all my supplies, I had to decline work.
Done.
Proof.
missed out on that, Iāve been working +70 hours the last month or so. But I do remember hearing something about it. Send me a PM with your address info, Iāll gladly ship it off to you as soon as possible. Thumbs up to you on your work man, you mustāve had a huge line of people there.
[Edit]
dang you went ahead and donated more, i was just gonna send it free now knowing about the previous work you did. If youād like Iāll match your donation or send you the exact back to your Paypal (assuming u have one).
Lol. Good work jdm. I was at a wedding today and missed all these pms from today lol. Funny thing my sister lives in Japan (Marines) and is helping with restoring communications to the affect part of the country and am aware of the massive relief work in the country! The rebuilding and support there has been amazing - I may post pics if I can!
On another note - I know that Iām very new to modding and Iām learning - bump to Gummo, 32teeth, purplarms and many more for their advice and help! Iāll happily accept (purchase) parts that are no longer needed it belong used! Iām know Iām low on the modding totem pole but just want to be considered too! Thanks to SRK, its members and FA for letting me be apart of this amazing community!
Sent from my DROIDX using Tapatalk
I just remembered I bought a TE stick for a friend at work and me and another buddy Dual modded it for him. Iāll ask him next week to see what he did with the old PCB. If he is willing to part with it, Iāll let you guys know.
Private Message to me the pictures destinydmm.
Hehe - you may have to. Iād like to have both varieties, but having purchased 250 classic meshes, Iām pretty invested in that type for a while. Once that runs out, I may have the opportunity to purchase the more recent version. Let me know if I understood your statement; I might be confused by what youāre actually calling āTrading Outletā.