** Focusattack.com fighting game store **

Tech Talk
41

You can absolutely still use the panel. You just need to connect the two signals to the PCB, and the ground to the daughter board.

42

any chance of slimmer wooden sides?

43

Thanks. Wait for my next work featuring Mio Akiyama.

Someone can correct me on these notes. also i will speak from a PS3 TE perspective.

  1. If you still want full functionality of your TE/SE PCB, you will have to daisy chain all the points from TE PCB to PS360 PCB to End Devices (buttons, joystick, switches, usb, etc.) Though the boards might conflict this way since it will run through multiple chips.

  2. Other wise, for sure, you can just forget the TE/SE PCB and just hook up everything directly to your PS360. You will still have to daisy chain your buttons since the PS360 has common ground in it’s set up and will still have to get under your turbo/home panel to solder the turbo/home points. You will also lose the turbo led lights and lock switch but you can still utilize the lock switch with simple soldering by doing a PCB to switch circuit to button.

Thoughts to share. This board is mainly geared up for building you own custom fightstick. If you have a 360 TE, there are easier methods since the board is easily accessed. PS3 (this is what I have) TE on the other hand has everything under the turbo/home panel and just annoying to work with.

44

will the PCB work on a HRAP3 SA?

45

Just remember to go from USB to PS360 PCB to End Devices.

46

Thanks for the quick response but I’m not very familiar with how this PCB business works. So if i understand correctly your saying to make sure it goes USB (from PS3 or 360) to the PS360 PCB (getting rid of the other components in the HRAP3) to the buttons?sorry if I’m all backwards.

47

Correct, I will also go in depth too. Your System will provide power via USB to your PCB. Your PCB will make a full circle to and back from your buttons, joystick, etc by power and ground wires. This hook up picture https://akihabarashop.jp/images/PS360HookUpSmall.jpg helps a lot by showing that you can connect multiple ground wires together by chaining them into a single ground terminal while they each have their own power wire going to the correct terminal. The buttons connectors flow either ways so it doesn’t matter which connection is the power and which is the ground, just don’t hook up two power or two ground to one button. The Joystick on the other hand, you may want to take off the restrictive gate and follow the circuits to find out which cable is which microswitch unless you orient it to have the wires on the right side also, then follow the picture.

The PS360 basically replaces your existing PCB.

48

I’ll ask Gummowned and his friend Elis about that.

49

Can I get feedback on these?

Focusattack.com is working with SINIX Design to create t-shirts based on their popular SINIX SSF4 character pins. We’re working with a 3 color design with a small Focusattack.com logo on the back. The shirt color will depend on the character. Currently we have Ryu against grey and Chun Li in her natural blue. Two versions are available - , and one with a tagline below. Below are the two versions:

Version 1 - solo character:

http://dl.dropbox.com/u/236247/sinix_tshirts/ryuchuntshirt001.png

Version 2 - character with tagline:

http://dl.dropbox.com/u/236247/sinix_tshirts/ryuchuntshirt001x.png

What do you think? If you haven’t checked out the SINIX Design SSF4 pins before, they’re definitely worth a look.

Order SINIX SSF4 Character Pins

PS: We’ll update the font to something more readable. :slight_smile:

50

Aww…no one likes the shirts? :frowning:

51

The shirts are nice, if they are available i’ll order one next week if I dont make a big purchase on black friday/cyber monday.

Sent from my PC36100 using Tapatalk

52

I think the shirts are pretty cool. I prefer the ones without the taglines.

53

I’d buy a Chun shirt without a tagline.

54

Sorry, guys. I now realize the t-shirt topic isn’t really anything for Tech Talk, so I’ll move that elsewhere. Thanks for the feedback!

55

I’d buy a Ryu one if the tagline was Shoeless bum.

56

lolz, Made in China. Link the thread when you make it. Just imagine a big group photo on a bleacher recreating the character select screen.

57

I pre-ordered two PS360 PCBs! When will they be shipping out?

58

Order came, thanks again for the quick service (and for swapping out that balltop)! Now I just need to get my plexi and we’ll be on our way…

No one really knows at this point. even Akihabarashop doesn’t know when they’ll be getting theirs out.

59

PaperTagre has a point. I’m working with Akishop to get the order through (international banks are tough to negotiate with lol), but they haven’t specified when the first shipment of PCBs will go through. That said, my large order could help things along. :slight_smile: I got your order RoyalFlushTZ. As soon as I know when they will ship, I will inform everyone here and specifically those who ordered at focusattack.com. Thanks!

60

Glad the order came in nice and quick! I’ll work with ArtHong to get those Plexis. :smiley: