I ended up hot gluing the CWB203As into place (the pre-existing holes in my ASCII stick were ever-so-slightly too large for a tight fit). I have to say, I really like them. As someone used to Japanese buttons, I much prefer the smooth action to the “clickiness” of the 203Cs. They feel like Seimitsus with just a tad more resistance…very cool.
(I figured out why the 203Cs were sticking, too. Space is so small inside the ASCII that the nuts were pressing against each other and compressing the housings. Moral of the story is: If you think you’re being clever getting Korean buttons for the 28mm holes in an ASCII, go for the 203As.)
Order 2645, i just sent a reply email to the automated purchase confirmation email because i done gived you the wrong address
I also sent you a PM on here and a webform message on eTokki because oh god i hope you see this please don’t send it to the place where I haven’t lived in like 1000 months or i will probably barf and cry
anyone knows what kind of buttons are in these cabinets? i’ve never seen white korean buttons to sell online, are they just standard crown buttons or some other brand?
[media=youtube]owv11JIMBo4[/media]
any news of the soft rubber for the Myoungshin?
and Laugh, just received my 4k, got here rly quick, thx
Laugh, excuse my casualness with this question, but are you holding back the new batch of Sanwa parts at your store too? I’m not religiously checking up eTokki everyday or anything like that. :looney: I just want to know. =P
So a few months ago, I posted some pictures of my incomplete mod of the wooden Saulabi stick. Today, I’ve finished modding everything! (Cause I wasn’t able to buy the stuff I needed until a few days ago :))
So here are the pictures (took pics with phone ^^):
Before: Wooden Saulabi, modded with black Myoungshin Fanta and 10 black Crown CWB203A (modded by laugh :))
Mods:
Drilled 4 4,0 mm holes to mount Myoungshin (more secure fit, didn’t trust those screws ^^)
Removed rubber feet, installed 40 mm aluminium case feet
Installed Saulabi weight, mounted on the bottom
Drilled 3 holes at the back + put in 3 Seimitsu PS-14-GN-BK, white (= Home, Start, Select button) + Filled up Select and Start buttons on top with 2 28 mm button plugs
Drilled 24 mm hole for Neutrik USB (As you can see, there’s also a 24 mm button plug, next to the Neutrik USB. That was the result of a mistake. :))
Removed needles that hold the stick together. Installed hinges on the back, locks on the left and right.
Removed half-broken Saulabi PCB, installed Dual Strike V2 PCB + wiring + QD’s for Myoungshin and Crown CWB203A
Bought Red Crown CWB203A buttons
That’s it, I guess. Wiring wasn’t done really well, but I’m very happy! ^^
Thank you again, laugh, for helping me out so many times
Hey I just got my things man! One Saulabi 4K (PS3), one green Fanta Myongshin, medium rubber, two Sanwa JLF, dark hai balls, a lot of Sanwa buttons dark hai.
Gonna mod three sticks tomorrow so I will probably need some help. One HRAP3SA, Tekken 3 Namco Old School and Saulabi 4K.
got my Taeyoung fanta in the mail two days ago and have finally finished modding my Madcatz SE.
so yeah, for those wondering if it was possible to install a Taeyoung fanta into a SE, yes it is…without the right tools Its a bitch, but its possible.
wonderful stick btw. After going thru Happ, IL, Sanwa, and Semitsu, this has to be the best stick ive played with by far.
Is there any way to mod the wooden Korean sticks to be compatible w/ the xbox 360? I don’t want to lug a converter + controller around everywhere I go. Ideally, I’d like a stick that “the cleaner” has couple of posts up from this one (w/ the jin artwork).
BTW, I’m located in Seoul. Looking forward to ordering from you guys!
I would have some questions about the Wooden Korean Stick:
I would like to know the length of the cable, I play approximately 2 meters of my PS3. If the cable is too short exists he a means to extend him?
What is the resistance of the rubber in the stick Myoungshin which is on the Stick?
And if it is not one -soft- when could have you of it of available?
Sizes of buttons on this stick is her the same that buttons Sanwa or Seimitsu?
