needs:
Dreamcast, ps2, Xbox 360 Support
Wants: Easy mod, adapter free
Budget: 220$
i have my mind set on a case and buttons the only thing i am having trouble with is deciding on the
pcb. I do not know how to solder. what are my options here.
P.S i was thinking of waiting for the PS360+ but i don’t think it will have dreamcast support (Future?)
Help please.
Thanks
You could order a case from Nitewalker and get gummo to wire it up for you because if you want dreamcast support you will need to know how to solder. That is unless you want to pick up a Madcatz xbox TE or VS and add one of toodles kitty boards then you would get it with all the systems you listed and would not need to solder anything.
link to Nitewalkers simple cases thead
is there any way to just get the madcatz TE PCB and then get the kitty along with it cuz i really want to get a case from www.tek-innovations.com
Not at retail you can post a want to buy in the trader here on the forum. The problem with that pcb is it has the extra turbo board and it would look cluttered if you jam it into a clear tek case. it would probably be better to get some one to wire you tek case for you
that works…
if you’re willing to shell out the cash
IMO it’ll prly look better if you end up using a clean modder to wire it up to make your tek case look much better
do you need the turbo board i heard people dont use it anyway
well you said your not a soldering guy and you have solder to get the home button at least if you remove the turbo board
what other options are there i dont need to have a tek case it would be nice though
If you can find a TE PCB off the trading outlet, but it still requires some moderate modding and that you know what you are doing.
TE Kitty +TE-S harness + Xbox 360 TE-S. + Neutrik RJ-45 and 1 foot ethernet cable.
Install RJ-45 jack into the Back button hole.
Message a modder like Gummo to make you ps2 USB and Dreamcast cable.
does the S+S=H code work on a kitty? i forget…
does the kitty support dreamcast?
get someone to wire the case up for you or either learn to solder or forget about the dreamcast support or buy a TE/VS
yes
all systems except genesis/N64
Issue is there are a few option for boards that will do everything under the sun… BUT Xbox360. Microsoft lawsuit issues. There are 2-3 boards sufacing that will do Xbox360/PS3/PC but nothing else.
So my Suggestion get a Cthulu board that will work on everything but 360. then dual mod it with a 360 controller board. if you cant solder i would get like a ps360, Paewang, Madcatz TE
cool i think i might go with a TE/VS is there any specific model i should be looking for
i have to have dreamcast support
Kitty+TE/VS=Dreamcast support for non soldering folk
will this one work? http://www.amazon.com/Mad-Catz-Major-League-Gaming-6306200/dp/B005LTSS7C/ref=sr_1_8?s=videogames&ie=UTF8&qid=1336962681&sr=1-8
Actually the MLG controllers may be better for the kitty since there is that giant peg that blocks where you mount the kitty in a VS stick