Converter Compatibility Thread

[MonoTekETeA]

yobo adapter working for ps3 or not? i have a 8v sfac arcade stick.

Sorry dude, been really busy. I’ll try to crack it open tonight and figure it out for you.

-Jeremy

[SpaceMarine17]

I can’t say based on firsthand experience, but if you’re looking at the EMS Total Control adapters which do PlayStation 1/2 to Dreamcast, then I really don’t see why the Sammy branded Guilty Gear XX ASCII stick wouldn’t work. ASCII sticks tend to work perfectly fine with most of the converters with a similar success rate to the Hori sticks. I think you’ll be fine. :tup:

OK, thanks. I just wanted to make sure that there would be no lag. I’ve heard (possible rumors) that some adapters cause lag and I’d obviously not prefer that, ha. Thank you though.

-a.

[Manx]

Does anyone know how the Super Dual Box Pro is? Please?

[ShinMagus]

Hmmm. There’s something here about it being unreliable, but I don’t know…

[brighenne]

Heads up to anyone with a suddenly dead xconverter:

Mine just randomly stopped working after sitting on a table for a little while. I opened it up and a tiny bead of solder dropped out that seems to have been shorting the board, because it’s working just fine now.

[MindGame313]

Does anyone have the cross battle adapter? I need it for my 360 te stick so I can use it for ps3, thing is I don’t want to take the chance of it lagging. Anyone know if it skips inputs/lags?

[ShinMagus]

Does anyone have the cross battle adapter? I need it for my 360 te stick so I can use it for ps3, thing is I don’t want to take the chance of it lagging. Anyone know if it skips inputs/lags?

You should take a look at the first post first…
http://forums.shoryuken.com/showthread.php?t=181187

Xbox 360 to PS3

Cross Battle Adapter by XCM: MarkMan confirmed that this drops inputs similar to the XFPS. People with 360 sticks should look into adding a Cthulhu PCB (Photos) for PS3 compatibility.

[Kyle]

I just wanted to give a quick confirmation that the 360 converters are still working after the most recent Facebook update for Live. I had to unplug and replug after the update for it to be recognized. I’m sure Microsoft could gimp these if they wanted to. I’m glad they haven’t.

[P_HAT]

Tested cheaass PS2-to-PS3 from DX

PEGA PG-P3015 0 5.55$

Lag tesres said what it have 0.22ms lag - same as my cheap HP keyboard.

[KnightWarrior]

Is there like a converters for

SNES to Turbografx 16/Turbo Duo
Saturn to Turbografx 16/Turbo Duo

for games like Street Fighter 2

[virsago_mk2]

Does the XConverter 360 works well with any Mayflash stick?

I know that laugh stated it’s compatible with Mayflash (Latest Revision), but how can I tell if my Mayflash is the newer revision or the older one?

[Sazae]

http://www.neo-geo.com/forums/showthread.php?t=204913

Playstation to NeoGeo converters on sale again, thought I would post it up here. These converters work 100% perfect, I own two and will vouch for them any day. These are very rare and hard to get so I thought I would share.

[MonoTekETeA]

Yobo PS2 to PS3 converter update.

SFAE 3.5v and T5 stick work. SFAE 8v doesn’t work.

Edit: Oh, I also have a Radio Shack 1.1 USB adapter and a Inpin, those also didn’t work with the 8v SFAE.

[Kyle]

Is there like a converters for

SNES to Turbografx 16/Turbo Duo
Saturn to Turbografx 16/Turbo Duo

for games like Street Fighter 2

I seriously doubt it. ToToTek makes a Playstation to PCE converter that may work. Hori also made a six button pad that looks similar to a SNES pad.

http://www.tototek.com/store/index.php?main_page=product_info&cPath=23&products_id=51

Does the XConverter 360 works well with any Mayflash stick?

I know that laugh stated it’s compatible with Mayflash (Latest Revision), but how can I tell if my Mayflash is the newer revision or the older one?

I’m not 100% sure but I believe it’s based on the manufactured date. I remember reading that at some points these changed from common ground to non-common ground.

[Quick_Man]

If you want a stick that works on both Xbox 360 and PS3 (And PS2, Dreamcast, etc.) get a PS2 stick like a HRAP. Get an InPin for PS3 and Xconverter 360 for Xbox 360. The newer (USB) sticks will not work on older consoles.

Is this still the best way to have a PS2/3/360 compatability?

And its still true that you can’t take a ps3 stick and use it on 360?

[Rieru]

i think due to X360 security features it works differently, therefore it can’t take a ps3 stick and use it on 360?

Recently gotten my inpin and xconverter from laugh, thanks to laugh but i waited like almost a week for the things to arrive despite i chose ems =w=…

Work great on my stick(PS2 HRAP stick), unfortunately i have 0 ps3 games to test for inpin. X360 went well no lag i can say :D.

With curiosity i decided to test my inpin on pc games, tested with touhou hisouten(doujin) all go well. Until i plug in xconverter into my pc, it detect as Controller for Xbox360 when i run touhou hisouten i notice i can’t use my D-pad, other buttons still works. It seem like the mapping of the axis is kind of screwed, did checked the axis settings. Z axis is being mapped to one of the buttons. I already updated the lastest gaming driver from microsoft.

Anyway just minor issue, cheers thanks laugh ^^;

*update
Xconverter does work well with ps 2 dualshock Analog on pc.

[Kyle]

Is this still the best way to have a PS2/3/360 compatability?

And its still true that you can’t take a ps3 stick and use it on 360?

Yep. Definitely still accurate. There are PS3/360 converters from XCM but they are iffy at best. You’re still better off with a PS2 stick, Inpin and Xconverter.

[Quick_Man]

I can’t seem to find HRAP2s for a reasonable price. Think I’m going to head into the custom stick realm.

Thanks for the replies.

[EdgeKun]

any one know if the ps2 to dc total control plus work with ps1 ds and ps1 digital pcbs?

Nah I’m talking about this one: http://slagcoin.com/joystick/pcb_diagrams/ps1_diagram1.jpg

I don’t think it’s gonna work just because there are no analog. :arazz:

Saw these questions asked, but didn’t seen any sort of reply. Do we have any idea if the Total Control Plus works with PS1 Digital Pads? Right now a friend is using a digital pad H as the PCB for his stick. I’m wanting to know if he’ll be able to use one of these or if we’ll have to replace his PCB with one from a PS1 dual shock for the Total Control Plus to work.

[jinxmitchell]

I was just informed that the Xconverter 360 is getting an upgrade to Xconverter 360 Plus and will enable the home function to be activated via pressing L2 and Select.