CNC Machined Cases - 2nd Batch Taking orders ( Post #228 Pg 10 for details) 7/16/10

[Solmin]

I have a Nam case from the first batch and 24mm seimitsu’s fit fine. no idea on Sanwa

[FA-MAS]

I had one he did for gamingnow, and they didn’t fit.

[jdm714]

I addressed that too, but never got a response to it for this Batch.
Said will be done for new Batch if ever happens.
Well here is new Batch, but no word of it.

[Twinkle]

rtdzign already pointed this out also, as well as giving a simple design change to fit Sanwa buttons.

Like jdm714 said, no official verifications yet from the NHTRAN328…

[Nabisco_DING]

maybe someone in the area can give him a quick call? he said he already bought the materials so lets hope he can get the request before he starts working on em

[NHTRAN328]

Nam,

I was wondering if you could give me exact dimensions for the bottom acrylic piece? One of the companies I do work for does steel fabrication, so I might look into the cost of getting the bottom plate made from stainless steel.

thanks.

I’ll get it to you later tonite if not sometime mid week.

Payment sent for a plain one.

Edit: Quick question, will the issue with Sanwa buttons in the 24mm holes outlined in post #76 on page 4 be fixed on this run of cases or should I just order Seimitsu’s for those?

Seimitsu, there will be no design change to this batch except for notch removal.

I addressed that too, but never got a response to it for this Batch.
Said will be done for new Batch if ever happens.
Well here is new Batch, but no word of it.

Seimitsu for the 24mm

rtdzign already pointed this out also, as well as giving a simple design change to fit Sanwa buttons.

Like jdm714 said, no official verifications yet from the NHTRAN328…

Update 8/16/2010 @ 10:10am PST

Hey Guys,

The raw materials for the cases have been ordered last week i should get them in from my supplier by Tues/Wed at the latest. Production will begin this week and I will have weekly status updates.

I received 2 more deposits from: FA-MAs & Bird333

Deposit recieved so far as of 8/16/2010 - 10:17 AM PST

PIF = Paid in Full
DR = Deposit Recieved

1. humpback whale - PIF - Silver - 1
2. NaughtyZeut - PIF - Black - 2 / NaughtyZeut - PIF - Silver - 2
3. Solmin - PIF - Black - 1 / PIF - Silver -1
4. Latin00032 - PIF - Silver - 1
5. M00b - PIF - 2
6. EA Megaman - PIF - Silver - 1
7. Necrobud - DR - Silver - 1
8. TheSoulHunter - PIF - Black - 2
9. Nabisco_DING - PIF - Silver - 2
10. NeedleKnife - DR - Silver - 1
11. Zaibas - PIF - Black - 1
12. HappyStickPerson - PIF - Black 1
13. JD_ - Partial - Red - 1 ($135 recieved still need payment for shipping $10.70 & anodized color $25.00)
14. Slade - PIF - Black - 1
15. Twinkle - DR - Silver - 1
16. bttrthnu - PIF - Silver - 1
17. onganju - DR - Blue - 1
18. MonoTekETeA - PIF - Silver - 1
19. FA-MAS - PIF - Silver - 1
20. Bird333 - PIF - Black - 1

Black Batch 1 - TheSoul Hunter (2) / Solmin (1) / NaughtyZeut (2)
Black Batch 2 - Zaibas (1) / HappyStickPerson (1) / m00b (2) / slade (1)
Black Batch 3 - Bird333 (1) /

Red Batch 1 - JD_ (1) /

Blue Batch 1 - onganju (1) /

If anyone needs to get a hold of me IM me on Yahoo IM nhtran328

[Twinkle]

Specs:
Weight: 5lbs +/-
Height: 1.875"
Length: 12.25"
Width: 9"
Material Thickness: 0.375"
Available Anodized colors: Black, Red, Gold, & Blue (Batches of 5 only)
Available plexiglass/acrylic from arthong, top template here. Bottom plate specs will be sent sometime this week.

Notes:
-Vewlix 8 button configuration only. Hole/s can be covered by the top plate.
-Will only fit Sanwa JLF w/ JLF-P1 Mounting Plate or Seimitsu LS-32-01 w/ S-Mounting Plate.
-Will only fit Sanwa OBSN-30 &/or Seimitsu PS-14-KN.
-Will fit Sanwa OBSN-24 buttons on the top but will extend out the sink holes.
-No notch hole for wiring. Can be solved by making a hole on the bottom plate.
-Ionized colors will still show visible mill marks.
-Rounded edges.
-Uses 6-32 screws & 8-32 screws for the joystick.

Did I forget anything? Feel free to add guys.

[jdm714]

NHTRAN328 says only Seimitsu 24mm.

[Akka]

How much would a black one cost?

[Twinkle]

NHTRAN328 says only Seimitsu 24mm.

It will fit, I actually liked it sticking out because it gave me more clearance for wiring since I love sleeving wires.

http://img580.imageshack.us/img580/1703/0628101632.jpg

Seimitsu button terminals will be more closer to the top buttons from the inside perspective since it will burrow into the sink holes.

[FA-MAS]

Man that’s clean.

[NHTRAN328]

hi all, i’m going thru my list… who is joe davey 1? please pm me.

Thanks

[NHTRAN328]

How much would a black one cost?

135 case + 25 anodized +10.70 shipped w/in the 48 states.

paypal address is nhtran328@gmail.com. please make sure to gift the funds if you are interested.

[Solmin]

I’m guessing you are planning to make more than 25 since you are accepting orders still from this batch. Cmon NAM sell me that 1 extra back plate :_)

[meus]

Hi Nam have send half payment for my case.

Thanks

[NHTRAN328]

I’m guessing you are planning to make more than 25 since you are accepting orders still from this batch. Cmon NAM sell me that 1 extra back plate :_)

If you can convince twinkle to put my stick together i’ll make an exception she did a really clean job with her case.

[Bird333]

Yhpm

[NHTRAN328]

Yhpm

is this short for you have pm? i havent received any yet.

[Solmin]

If you can convince twinkle to put my stick together i’ll make an exception she did a really clean job with her case.

Yes I agree, that is a very clean job with the case

Ok Twinkle, help a fella out Help Nam sleeve up all da wires in his case

[Sl_de]

I’m lazy; can someone please just spell out everything else I should buy to set this up and/or have someone else put it together for me?

1x Toggleme CNC Bat-Top w/ extra spring

of buttons, size x?

of buttons, size y?

360 controller to cannibalize
what else?

thanks