My only critique is the way the Neutrik is mounted:
Why is the USB-A side shown?
I personally feel that, especially on wooden cases, Neutriks should either be flush-mounted via a routed hole/inlay, or mounted with the rubber gasket if no routing is done. Just mounting it on the side of the case like that is very… haphazard, IMO.
Hi, my friend! Thank you for your advice and words. This detachable usb model is not reversible, hence it shows the type A, equally mounting the Usb directly on the frame is a matter of taste. Is possible to routing if you like it. Best regards!
Just got my Dreamcast modded with GDEMU and DCHDMI. So I figured I’d mod my agetec sticks as well.
Upgraded with JLW and OBSF -30 snap in’s with cherry mod.
Been awhile since I’ve posted here but a few photo’s that were taken by some of my previous clients showcasing artwork that I helped into making for them.
I recently had vocal cord surgery and can’t speak at all for a few weeks during recovery. So I modded my VLX with silent buttons, an optical joystick, and gave it some silent character art.
Custom panel and plexi by AllFightSticks
Art by ckng
Gamerfinger buttons with Zeal Sakurio switches
Hyabusa stick with a SparkCE Optical Sensor and circle gate
Jasen’s Customs Aux Panel
Brook Universal Fighting Board w/ Ez Mod Board
Mimic Cables sleeved USB cable
Neutrik port to make the cable removable
Sorbothane and foam on the inside to get rid of the echo sounds.
Full Optical build complete for all but two custom MAS sticks I have remaining. All joysticks are NOS Wico Perfect 360 Optical Joysticks, and Wico Perfect 360 Optical Spill Proof buttons, with over 60 left to spare. image|280x500