Brook Universal Fighting Board Thread

[zeththedarkmage]

@GOGO.Zippy @jonyfraze any chance we can get a start+select= home added in?

[Vicko]

^Good idea, as well as adding a shortcut for a manual reset for timeout issues so users don’t have to unplug/replug.

[enb141]

@GOGO.Zippy @jonyfraze any chance we can get a start+select= home added in?

Has been mentioned in the thread that the reason why Brook UFB doesn’t has it is because that conflics with PlayStation 4 buttons.

[AaronS]

Good stuff Brooks on getting these updates out so quick. Satisfied customer here

[03uddinr]

For the time being guys, you can put the fight stick in Ps3 mode n use the legacy feature

[pApArOACh]

Please implement “Soft Reset” in the new firmware like the Cerberus does by pressing Select + 2K = Soft reset.

[cimbyote]

Ok, so maybe I’m a weirdo but I still like my Mad Catz SF4 SE stick (360). I have custom art and all that, and memories. But I have SF5 on the PS4 and don’t want to get a new stick right now.

I have the Brook PCB already. I want to put it into the SE, at least until I get around to building a custom stick in the summer.

So I was wondering if anyone has any experience with putting any new PCB into an SE stick. It’s a bit tight in there, and not sure where to mount the thing.

Honestly even a picture would help a bunch. I’ve been Googling for a while, can’t find anything really useful. I get how to do it generally, but I want to install it the least destructive way as possible, as I plan on reusing this same board in a different stick.

[Wade_Garrett]

Was starting to think I threw $100 down the toilet. Hopefully the FW is good

[poisonmar]

Ok, so maybe I’m a weirdo but I still like my Mad Catz SF4 SE stick (360). I have custom art and all that, and memories. But I have SF5 on the PS4 and don’t want to get a new stick right now.

I have the Brook PCB already. I want to put it into the SE, at least until I get around to building a custom stick in the summer.

So I was wondering if anyone has any experience with putting any new PCB into an SE stick. It’s a bit tight in there, and not sure where to mount the thing.

Honestly even a picture would help a bunch. I’ve been Googling for a while, can’t find anything really useful. I get how to do it generally, but I want to install it the least destructive way as possible, as I plan on reusing this same board in a different stick.

It’s basically the same process as doing it to a 360 TE stick. It should be fine size wise since you are replacing the main PCB (the big one at the bottom) with the Brooks boards. You’ll be keeping the turbo panel PCB. Look up how its done one a 360 TE.

[Jasen_Hicks]

I also checked the new FW, looks good so far in my brief testing. I passed it along to @GOGO.Zippy as well.

[blacksquid]

+1000000000 on the soft reset. Any idea if a Mac fw updater is in the works?

[dehumanizer]

Can’t wait to dl the firmware on my stick tomorrow.

[mR_CaESaR]

New F/W is out people

http://www.brookaccessory.com/download/PS4/

[ZeroX03]

Just updated my UFB. Testing it out now, props to Brooks for the speedy update.

[DonkeyBlonkey]

I bought and installed my Brooks UFB about a week a go and have been playing without incident on the PS4 until the most recent update (Playstation 3.50 System Update) that I downloaded about thirty minutes ago. I’ve got two eight minute time outs, and then again after eight minutes I have no control but I’m caught in the back walk animation as if that input is being registered. Unplugging my controller and immediately plugging it in resets the eight minutes timer.

Was there a firmware update addressing this? I have not had to download anything for my PCB at this point. Any help would be appreciated.

You know what I thought it was just me but you are very right. After downloading the new software update for my PS4, I’ve been getting time-outs on my stick and thought it was something wrong with my wiring lol.

[sasquach]

I bought and installed my Brooks UFB about a week a go and have been playing without incident on the PS4 until the most recent update (Playstation 3.50 System Update) that I downloaded about thirty minutes ago. I’ve got two eight minute time outs, and then again after eight minutes I have no control but I’m caught in the back walk animation as if that input is being registered. Unplugging my controller and immediately plugging it in resets the eight minutes timer.

Was there a firmware update addressing this? I have not had to download anything for my PCB at this point. Any help would be appreciated.

You know what I thought it was just me but you are very right. After downloading the new software update for my PS4, I’ve been getting time-outs on my stick and thought it was something wrong with my wiring lol.

New firmware is out, so you can try it to fix the issue.

[pof]

The new firmware 1.4 works well on my Universal Fighting Board, on PS4 with firmware 3.50. No 8-minute timeout anymore. Thanks Brook for the quick update (I just hope it’s always like this when Sony decides to nuke our UFBs again).

[Vicko]

They actually beat their record by a few hours this time. Soon they’ll have it out before anyone can even realize it!

[enb141]

I hope this board gets updates for soo long, not like the PS360+ that barely has support since a few years ago.

[GOGO.Zippy]

Hi All Guys.
Thank you to waiting.
Brook released patch file to fix timeout issue on 3.50 system.
Please go to Brook website and select correct file to update.

http://www.brookaccessory.com/download/PS4/

Best Regards.
GOGO.Zippy