yes i double checked, even reversed them and plugged it in, nothing happened
If thats the case i guess the only thing left to do is contact your suplier or Brook directly through Zippy for an rmaâŚ
Thanks for replying. I tried this but I have the same symptons as gahrling on my windows 7 machine. The controller is detected and shows up as an xbox 360 controller but doesnât register buttons/stick.
On my windows 10 machine, it shows up as an xbox 360 controller too and registers buttons/stick though.
@douglam
Please searching USB_VID_0x0C12 then delect USB device in regedit.
Reboot and plugged in USB to confirm on Win7âŚ
I canât seem to find USB_VID_0x0C12 in regedit
@GOGO.Zippy I have another suggestion to make. Could you please allow for the firmware mode to also be activated by using the Touchpad/Select button + Options/Start.
The majority of sticks have only 2 or 3 buttons other than the main 8, plus directions. My favorite config is to set those 3 other buttons to Options/Start, Touchpad/Select, and Home/Guide. This makes the most sense to me, as Touchpad and Select are used in training mode for Street Fighter V and Guilty Gear, and for taunt and other things in other games. The Share button on PS4 is often not used, or can be accessed, on occasion, by using another controller. That being said, it is usually the button to be sacrificed when there are only so many available. However, not being able to update the firmware without the Share button is difficult in these setups.
Sincere thanks for your consideration.
I still canât find it. Do you have a full path or anything? like HKEY_LOCAL_MACHINE\SYSTEMâŚ
Do you ever installed Zeroplus USB Driver(VID_0C12) on your pc ? if you did it on PC, please remove and delete
The both of VID_0C12&PID_0EF7 and VID_0C12&PID_0EF8 are working on PS3/PS4 Fighting board.
Please find them
Oops. I had âMatch whole string onlyâ checked before. I was able to find these and a large majority of them but there are still a few such as âHKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\HID\VID_0C12&PID_0EF7&Col01â that get Error while deleting key.
I restarted my computer and tried plugging in my controller anyway. What I get now is that it starts off first as P4 wired gamepad then changes to Controller (Xbox 360 for Windows). It still doesnât accept any inputs though.
@douglam
Please delect it again then download this version to support the forced X-Input mode
>> PS3PS4FightingBoard_20160219
http://www.brookaccessory.com/download/Fighting%20Board/
BTW, Installed Xbox360 PC driver to use.
>> https://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows
It added manual detective XInput mode on PC: Press the OPTION(START) button then plug USB
It will run directly in X-Input mode on PC.
It now goes straight into Controller (XBOX 360 for Windows), but it still canât see any inputs. 
i have the same issue with a brook board!
iâm using a Samsung QX410 running Windows 7 x64. tried with USB Hub and direct USB but nothing happens
Tried on ps3 and works! any suggestions?
Also, i just have touchpadkey wired to a button, can i update firmware with that?
Edit:
Tried another cheaper USB Hub, now it works! iâd like to have a force non-xinput mode AND to be able to update firmware with TouchpadKey⌠maybe⌠touchpad+start = Select/Share?
i got a disconnect problem with my fightboard ps3/ps4.
sometimes if i stand up the fightstick disconnects (its completly random)
i can force some disconnects by plug/unplug my headphone jack ( https://www.dropbox.com/s/nyon9dxqs5ndqx5/20160217111754.mp4?dl=0 )
i talked with some of my friends and they think it has to do with the usb cable ( http://imgur.com/HAxMIlB )
i got this problem only on ps4 (on ps3 it works fine)
maybe you guys can help me or others have the same problem and could fix it somehow
any tips are appreciated 
Iâm having the same issue. It was working in non xinput mode but after update all my inputs are not detecting. I tried holding start and ps button still no go it detects it as an xbox controller but still no inputs detected. I have the xbox controller drivers installed also. Tried uninstalling then reinstalling still no inputs detected. Iâm running windows 10 64bit.
i saw the vid on the first page, but are there any numbers for input lag test on ps4 and ps3? At work and cant browse too much right now. lol
@GOGO.Zippy Just wanted to say thanks again for the hard work youâve put in to solving my issue. My PS4 FBâs are now working on my computers as intended, all signals are being detected.