One quick question, which should I buy if I want to use my PS3 stick to play on PS4? PS3 to PS4 Super Converter or PS3/PS4 to PS3/PS4 Controller Adapter.
Anyone got a heads up on any alternative locations to purchase the white PS3/PS4 converter, the usual suspects are sold out and Chinese New Year has pretty much gummed up restocks it seems.
Also big shoutout to Brook converters - we had a sfv session last night where most people brought their laptops, and someone showed up with a few of the red ps3/4 to xb1 converters so that the ps4 sticks worked on pc plug and play
Just wondering, does anyone know if the Brook PS3 to 360 converter is a new build that isnāt as laggy as the old one, and if the firmware on it can be updated like the new ones?
Also any thoughts on if the PS4/PS3 Hitbox would work with it? Thereās no way on it to specify between which mode itās in, but theoretically it might be able to work as it is a PS3 stick?
If the PS3/PS4 Hitbox has a mode switch, you need to set the hitbox to PS3 or PS4 mode, if there no switch it probability ether auto detect or locked in PS4 mode (PS4 controllers work on the PS3 but not vise versa).
I am unsure what PCB the Hitbox uses now for their PS4 controllers.
If it auto detects then its a non-issue, if it does not you need to set the controller to PS3 mode if you can.
You need to ask the Hitbox people about the Hitbox functions, unless someone can chime in and say what board the Hitbox uses now for their ps4 controllers.
Far as I know all the Brook converters can be firmware updated, I doubt there any significant lag but if their were the firmware updates would address that
I have an older ps360+ (says ver 2.03). Those are the ones that have input lag in x360 mode, right? Itād be better for me to get the ps3->ps4 version, right?
Hello @GOGO.Zippy , I have the XBOX360-PS4 adapter.
I successfully updated the A file. But when I do the B file and click update it says āUpdate Failedā and goes back to initial screen.
What to do? Also in device properties, there is a yellow exclamation mark on āZeroPlus USB Deviceā, it says below "This device cannot start (Code 10).
For your informatino when I installed driver, I selected āZeroPlus USBā which was the last option, and then I restarted computer.
What did I do wrong? Can I gtet a magic message too pleaaaase? hehe