Brook Converters Thread

[GOGO.Zippy]

Ps3 -> Ps4 adaptor doesn’t work correctly with Virtua Stick High Grade. It randomly disconnects, directions are swapped for the diagonals on the D-Pad and buttons only work if two of them are pressed at the same time.

Anyone with the same problem? Is there any solution?

Please help!!

@Rax
Please look your inbox, I sent a message to U…

[GOGO.Zippy]

I couldn’t find anything earlier in the thread, so I do apologise if this has already been addressed, but I’m having trouble having my X360/XBONE > PS4 Brook converter recognise my Hitbox (PS360+ v1.65). I’ve tried holding down the force 360 macro when plugging it into the converter itself, but this does nothing. Any advice or resources that could be of help?

@shadowplay65
Go BROOK website to download correct file to update.
Please install Zeroplus USB Driver and B patch file. (Not install A patch)

Look at PS4 Converter - Firmware update instructions_20160114.pdf before doing and following below list

Step1. plug converter and install Zeroplus driver
-> converter don’t connect with your stick
-> (Step1 to Step7 in instructions_20160114.pdf )

Step2. ZPPN002-B_V14_20151126.zip (The latest version)
-> converter don’t connect with your stick
-> (Refer to How to update ZPPxxxx-B_.exe ? in instructions_20160114.pdf)

[MarkMan]

Hi @GOGO.Zippy! I am a BIG fan of the product range so far. I’ve been testing/using them.

I have the GREEN X360XONE to PS4 super converter and I’m using the Xbox One Elite controller on PS4.

I did a few of the updates on the site but haven’t been able to get the Xbox One Elite controller 3.5 mm audio jack to work like the PS4 Dual Shock 4 (when I plug in earbuds/headphones) the audio isn’t coming out of the controller). Does this work on any of the firmwares?

[hokuto85]

Hi guys,
Could you tell me if green brookmax(360 to ps4) and hori rap VX sa work with ps4?
Thanks

[shadowplay65]

I couldn’t find anything earlier in the thread, so I do apologise if this has already been addressed, but I’m having trouble having my X360/XBONE > PS4 Brook converter recognise my Hitbox (PS360+ v1.65). I’ve tried holding down the force 360 macro when plugging it into the converter itself, but this does nothing. Any advice or resources that could be of help?

@shadowplay65
Go BROOK website to download correct file to update.
Please install Zeroplus USB Driver and B patch file. (Not install A patch)

Look at PS4 Converter - Firmware update instructions_20160114.pdf before doing and following below list

Step1. plug converter and install Zeroplus driver
-> converter don’t connect with your stick
-> (Step1 to Step7 in instructions_20160114.pdf )

Step2. ZPPN002-B_V14_20151126.zip (The latest version)
-> converter don’t connect with your stick
-> (Refer to How to update ZPPxxxx-B_.exe ? in instructions_20160114.pdf)

I followed the PDF guide and installed both, does this mean I’ve effectively locked myself out of using PS360+ controllers?

[Foolinfection]

I missed the Evo reveal but did they say anything about Brook Converters being legal?

“Buyer beware” was their stance. From how they put it, if they aren’t patched out (by Sony/MS), they’ll be allowed. If they are, they’re banned. Not sure why they’d be banned if that were the case, as if they don’t work then… they don’t work.

Thankfully, it seems like Brook has been very quick to update the firmware for the converters everytime Sony/MS release an update that “breaks” the converters.

Very easy explanation. If the converters have been blocked by Sony then they’ll work for 8min. and then timeout meaning that anyone using one of these would be their own schedule killer and they don’t want to deal with that.

Well then shouldn’t that mean that sticks with a ps360+ be banned too? Granted those are a simple reset that literally takes a few seconds.

[jonnyhallsworth]

Hi guys. I think I’ve gone and done a bad thing.

I had trouble with the firmware updates so I thought I would uninstall the Zeroplus driver and try that again. Now it’s not appearing as a PS4 pad anymore. It comes up as HID Transfer under Unspecified in Devices and Printers. How can I set it back to normal?

Also the adapter itself is stuck with a purple light now instead of going back to blue. That is the problem I was trying to fix in the first place.

I have the PS3>PS4 converter btw.

Thanks for any help!

edit I have the drivers and stuff back now by unplugging and restarting and all that kind of stuff. I’m still stuck with a purple light though

[hikarutilmitt]

Hi @GOGO.Zippy! I am a BIG fan of the product range so far. I’ve been testing/using them.

I have the GREEN X360XONE to PS4 super converter and I’m using the Xbox One Elite controller on PS4.

I did a few of the updates on the site but haven’t been able to get the Xbox One Elite controller 3.5 mm audio jack to work like the PS4 Dual Shock 4 (when I plug in earbuds/headphones) the audio isn’t coming out of the controller). Does this work on any of the firmwares?

Nope. Headsets do not work with the adapter.

[jellyrajah]

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

[GOGO.Zippy]

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

@jellyrajah
Yes. Brook already updated latest firmware on recent converter.

[jellyrajah]

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

@jellyrajah
Yes. Brook already updated latest firmware on recent converter.

Thanks for the quick response.

I’m trying it now on the SFV beta but it stops working after a few minutes and doesn’t work again unless I plug it out and then back in.

Any advice? I’m using a PS3/PC Hitbox which uses a Toodles Cthulu board.

[jonyfraze]

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

@jellyrajah
Yes. Brook already updated latest firmware on recent converter.

Thanks for the quick response.

I’m trying it now on the SFV beta but it stops working after a few minutes and doesn’t work again unless I plug it out and then back in.

Any advice? I’m using a PS3/PC Hitbox which uses a Toodles Cthulu board.

Run the B update. That has the additional support for the toodles board

[Oh_Its_Bo]

My ps3>ps4 stick just stopped working when I tried to update the firmware in the B update. It actually never got to the “Update Successful” screen it just resets to screen where I can press the Update button.

Any help?

[GOGO.Zippy]

Toodles

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

@jellyrajah
Yes. Brook already updated latest firmware on recent converter.

Thanks for the quick response.

I’m trying it now on the SFV beta but it stops working after a few minutes and doesn’t work again unless I plug it out and then back in.

Any advice? I’m using a PS3/PC Hitbox which uses a Toodles Cthulu board.

Run the B update. That has the additional support for the toodles board

Thanks @jonyfraze …
@jellyrajah I wrote a massage to you, please follow to do.

[GOGO.Zippy]

My ps3>ps4 stick just stopped working when I tried to update the firmware in the B update. It actually never got to the “Update Successful” screen it just resets to screen where I can press the Update button.

Any help?

@"Oh Its Bo"
Please look inbox, I sent a message to you.

[jellyrajah]

Toodles

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

@jellyrajah
Yes. Brook already updated latest firmware on recent converter.

Thanks for the quick response.

I’m trying it now on the SFV beta but it stops working after a few minutes and doesn’t work again unless I plug it out and then back in.

Any advice? I’m using a PS3/PC Hitbox which uses a Toodles Cthulu board.

Run the B update. That has the additional support for the toodles board

Thanks @jonyfraze …
@jellyrajah I wrote a massage to you, please follow to do.

Thanks Zippy, it’s working perfectly now.

[GOGO.Zippy]

Toodles

I purchased one of these a few days ago. When I tried to update the converter I got a prompt saying that it was already on the most recent firmware - does this mean I don’t have to do anything?

@jellyrajah
Yes. Brook already updated latest firmware on recent converter.

Thanks for the quick response.

I’m trying it now on the SFV beta but it stops working after a few minutes and doesn’t work again unless I plug it out and then back in.

Any advice? I’m using a PS3/PC Hitbox which uses a Toodles Cthulu board.

Run the B update. That has the additional support for the toodles board

Thanks @jonyfraze …
@jellyrajah I wrote a massage to you, please follow to do.

Thanks Zippy, it’s working perfectly now.

@jellyrajah
Welcome…keep in touch and enjoy it…

[NotOneOfUs]

Not to press, @GOGO.Zippy, but can you check Brook Converters Thread ?

[shadowplay65]

If I followed the guide and installed A and B, does this mean I can’t use my PS360+? @GOGO.Zippy

[Doopliss]

I’m trying it now on the SFV beta but it stops working after a few minutes and doesn’t work again unless I plug it out and then back in.

This happens with my 360 converter as well, I use a standard wired 360 controller.