Just found out those converters might not have native support for Mad Catz TE sticks, you might need to update the firmware
Download the update here
@C-Sword hey being that you have a working relationship with Brook - do you think you can have them work on support for the PS360+ ? I sent them a message via their website however no response. also how do you properly install this firmware?
Instruction video is in chinese, but theyāre working on an english version now
Cool, thanks for that. I just got the PS3/PS4 to Xbox One converter on Tuesday and it works with my PS3/4 Mad Catz TE2 in either mode. The lights on the TE2 turned on a couple of seconds after i plugged the converter into the Xbox One. Also tried with a Dualshock 4 and it worked with no problem. I guess that first converter I got was faulty.
I found a xbox one to ps4 version on ebay.
If they do retro, definitely Sega Saturn to Xbox one/PS4 would be amazing.
Thatās not Xbox One to PS4. Itās the same as the one I have and itās PS3/4 to Xbox One. Thereās a vendor on Amazon Marketplace that has it mislabeled as Xbox One to PS4 also.
Edit: The description of the converter at the bottom of the page is correct though. The seller really should change the title of the item listing.
Just checked Brooks gaming Facebook page and it looks like the xb360 and xb1 to ps4 are scheduled for late September: item ID p4-gr (green colour) and p4-pr (purple) respectively
For 'to ps4 converter", looks like only the PS3 to ps4 (p4-wh, white) exist at the moment according to FB page
I can confirm that it doesnāt work with my Makestick proā¦
so a MC Cthulhu stick doesnāt work on PS4 with this? thatās a shame. does it work on Xbox One?
Hey is this the PS2 to PS4 converter mentioned above? http://www.dxsoul.com/product/ps2-to-ps4-pc-controller-gamepad-joystick-converter-adapter-grey-901393065#.VdnS_bJVhBc
This is probably a silly question, especially since itās printed on the box, but Iād just like to verify something.
I play a lot on PS3 (Marvel), PS4 (MKX, eventually SFV) and XB1 (KI). Ideally Iād like to get a stick that does all three. It looks as though the XB1ā>PS4 converter does not support PS3, so, it would be in my best interest to purchase a PS3/PS4 stick and use the PS3/4ā>XB1 converter, correct?
But have all of these sticks been tested to work with the converter? Stuff like the TE2 or the Hayabusa, which both seem to be PS3/4 compatible? This would be preferable to getting something like an Atrox because then Iād only be able to go XB1ā>PS4 (no ps3) unless I hard modded it?
I know some of this has been answered in the thread but since Iām about to place orders Iād just like the reassurance. Thanks, everyone.
@āPhase 3ā yeah I would say best option is get a PS3/PS4 stick and use the PS3/PS4 -> XboxOne converter. Some of the newer Hori Sticks or possibly a new PS4/PS3 TE2 (not tested yet)
@āPhase 3ā Iāve tested the PS3/PS4 to Xbox One converter on my PS3/PS4 TE2 and it works well in both PS3 and PS4 mode. That would be your best option for PS3/PS4/Xbox One unless you want to padhack. Iāve also got a PS3/PS4 HRAP4 Kai that I havenāt tested yet.
Hey guys, Updated the 1st post of this thread with a confirmed list of working controllers based on the comments posted here. If you would like to contribute to the list post your findings in the comments and ill update the thread.
Iām actuall going to be receiving a few of these to test in the next day or two, while I donāt have any advanced testing tools I do have a few different sticks for testing. I should be getting a ps3 to ps4 converter, a 360 to xbox one converter and a 360 to xbox one converter. Iāll update the findings with my sticks but if there is something you want to know about let me know and I will try to test it.
This is the email I got when I asked about a possible firmware update to work with ps360+
"Appreciate your inquiry.
As our knowing, akishopās ps360+ is basedon PC communication to develop.
Even it has PS3 chip, but its inner PCBA and communication is based on PC model to develop.
Our PS3 to PS4 converter requires the controller based on PS3 model to make.
Thus, akishop PS360+ is canāt compatible on our converter.
Hope you kindly understand.
Thanks.
"
@Lionheartx awesomeā¦ post your findingsā¦ @Pez_Man wow thanks for the info I asked them the same question but never got a detailed response. Thanks for sharingā¦
The Xbox One controller only works wired when connected to the Xbox One to PS4 adapter. All the buttons function like they should, pressing L3 and R3 together emulates the touchpad, Iāve been using it for various types of games (fighters, Shmups etcā¦), no issues.
Edit: Oh yeah, the adapter supports vibration.