Sorry…please kept waiting…
I already bought a controller, but I don’t receive. :s
Your XboxOne TE2 won’t work with the x360-p4 adapter - but (not to confuse you) there is another green adapter that is x360/XboxOne-p4. That one will work.
Hi Winter
I received a Joytron Paewang Revolution fight stick on PS3&XBOX360&PC multi-system
It can work with BROOK Converter on PS4. 
Thanks! 
Non-US residents can now get the PS2 to PS4 adapter on ebay
Hey everyone,
Great news! I just tested a new beta version of the firmware this morning (v14) which addresses compatibility of the White P3-P4 adapter with the ps360+ In PS3 mode. Spent about an hour testing it in usf4 training mode and I can confirm its working with out any noticeable lag. Also support for the PS3 Toodles CTHULHU PCB is officially confirmed working as well. @GOGO.Zippy will officially release the official version soon.
So is the ps2 to ps4 converter lagless or does it have 1 frame of lag?
Great news! I just tested a new beta version of the firmware this morning (v14) which addresses compatibility of the White P3-P4 adapter with the ps360+ In PS3 mode. Spent about an hour testing it in usf4 training mode and I can confirm its working with out any noticeable lag. Also support for the PS3 Toodles CTHULHU PCB is officially confirmed working as well. @GOGO.Zippy will officially release the official version soon.
[/quote]
great to hear, cant’ wait to test it out when it’s released
Want to buy one for my Qanba q4.
It can be used on 360 and PS3 so I’m wondering which converter I should get.
PS3 to PS4, or , 360 to PS4? Is there any difference between the two converters when using a Qanba?
I lag tested both of them and they perform the same.
They are different on inputting devices.
PS3 to PS4 only supports PS3 controller, PS3 fight stick…not support XBOX360 controller, XBOX360 fight stick…
X360 to PS4 only supports Xbox360 devices…
So you want to switch correctly mode on your stick to work with BROOK converter.
hey jonyfraze do you know if the Kitty PCB work’s with the ps3 to ps4?
With PS360+ (mode PS4) work perfect in Xbox One
P3/P4 to Xbox One (Red)
Waiting new firmware for this converter support Xbox One in PS3 mode
unfortunately no one has tested it yet. however if you look back on this thread some people reported than most dual pcb mods have been troublesome. you might be safer with the x360 to p4 versions as 360 is the native pcb. if you ever test it out please let us know.
Do I need the xbox360 to ps4 adapter for my sticks that have ps360+ pcb or can I use the xbox360/xbox1 to ps4 adapter?
These two coverters are both okay…
Hey all. Just wanted to drop by and say thanks to those in the thread who’ve been putting in the research to test out all these boards. I have a PS360+ or two that I’m looking at putting into a project stick, and I was bummed that I was not going to have a PS4 option (feel like I’m too old and busy to padhack anymore). But now it seems like I will thanks to these converters.
Now I just have to figure out if I want to get the 360/XB1 -> PS4 converter or the PS3->PS4 converter. Seems like with the PS360+ either should be an option with new firmware. I have the older PS360+ so on the 360 version I would have that lag. But at the same time, I’m far from hardcore, and I do happen to have more 360 pads sitting around that would be nice to use with my PS4 given the option.
When will the V14 Version for the ps3 -> ps4 (white) converter be available to the public?
And what about the latest firmware for Xbox360 -> ps4 converter (lime green) it like to have both.
@machomanmo V14 is going through QC testing right now - or PM gogo.zippy if you want the beta. Also check the first post guys I updated it to have the links to the official firmware updates…
Xbox360 -> PS4 doesn’t have any updated firmware. All XBox360’s and XBox one’s device both are must following Microsoft specifications to design.
If you need beta version on white converter, I could shared to you…