Brook Converters Thread

[Brook_Engineer]

Hi everyone! Sorry if my question was posted before in thread… but didn’t find it.
I want to acquire a pair of ‘Xbox 360/Xbox ONE to PS4 Super Converter’ because I have a MadCatz TE Round 2 and a Madcatz VS fightstick, both for Xbox360 (I use to play local matches too).

My main target is playing SFV on PS4 with these xbox360 sticks… but I also want to know if I can play on PS4 with Xbox ONE wireless controllers (no bluetooth) if I get an official ‘Xbox wireless adapter for Windows 10’.

I read somewhere that I can play on PS4 with 360 wireless controllers if I own the ‘Brook Super Converter + Xbox360 official wireless adapter for PC’ (the old one)… but I don’t know if I can do that with the new Xbox One adapter for PC. Could it be possible?? Thx!!!

Finally, I supose that you couldn’t test a PS4 Pro yet… but do you think that ‘Xbox 360/Xbox ONE to PS4 Super Converter’ will be compatible with PS4 Pro?

Thanks in advance and sorry for the inconvenience!!!

Brook converters don’t support XBOX ONE Wireless Adapter.
And PS4 Pro will be tested:)

[C-Sword]

Someone is asking on another forum if the PS3 to PS4 adapter supports the sixaxis PS3 controller?

[Valanarro]

I bought the Xbox 360 to Xbox one adapter, and it seems to have already been updated to the latest firmware, but I can’t update it to the TE version

[GOGO.Zippy]

Someone is asking on another forum if the PS3 to PS4 adapter supports the sixaxis PS3 controller?

@C-Sword
Yes. It can support

[Brook_Engineer]

I bought the Xbox 360 to Xbox one adapter, and it seems to have already been updated to the latest firmware, but I can’t update it to the TE version

1. which version did you try to execute?
2. what does the round stick(on the back of the converter) say?

[Valanarro]

I bought the Xbox 360 to Xbox one adapter, and it seems to have already been updated to the latest firmware, but I can’t update it to the TE version

1. which version did you try to execute?
2. what does the round stick(on the back of the converter) say?

I tried the one specifically labeled TE dated 2015/12
the back sticker is dated 7 16

[giusepe]

Hi everyone! Sorry if my question was posted before in thread… but didn’t find it.
I want to acquire a pair of ‘Xbox 360/Xbox ONE to PS4 Super Converter’ because I have a MadCatz TE Round 2 and a Madcatz VS fightstick, both for Xbox360 (I use to play local matches too).

My main target is playing SFV on PS4 with these xbox360 sticks… but I also want to know if I can play on PS4 with Xbox ONE wireless controllers (no bluetooth) if I get an official ‘Xbox wireless adapter for Windows 10’.

I read somewhere that I can play on PS4 with 360 wireless controllers if I own the ‘Brook Super Converter + Xbox360 official wireless adapter for PC’ (the old one)… but I don’t know if I can do that with the new Xbox One adapter for PC. Could it be possible?? Thx!!!

Finally, I supose that you couldn’t test a PS4 Pro yet… but do you think that ‘Xbox 360/Xbox ONE to PS4 Super Converter’ will be compatible with PS4 Pro?

Thanks in advance and sorry for the inconvenience!!!

Brook converters don’t support XBOX ONE Wireless Adapter.
And PS4 Pro will be tested:)

Thanks!!! I’ll be watching srk forums & Brook official website, waiting for news. When I know it works on PS4 Pro, I’ll get 2 ‘Xbox 360/Xbox ONE to PS4 Super Converter’

Thx again!!!

[ryuuzaki_l10001]

Hi. I currently have the xbox360/xb1 to ps4 converter and it keeps timing out after 8 minutes of being used. I’ve tried updating but the program just freezes during the process. Is there something im missing here or doing wrong?

[Brook_Engineer]

Hi. I currently have the xbox360/xb1 to ps4 converter and it keeps timing out after 8 minutes of being used. I’ve tried updating but the program just freezes during the process. Is there something im missing here or doing wrong?

1. make sure you downloaded the correct file
2. don’t connect your controller to the converter for update

[BadIntent]

I have the white PS3 > PS4 converter. Back of converter says 16 17. Updated to TE with the file name PS3toPS4_TE_V21_201609. Problem is stick converter almost never lights up or works. It lights up in the computer but not in the PS4. To fix this a couple times I updated again even though I was already updated. Sometimes that helps but usually not. When it works, it will work fine until I turn off the PS4 then goes back to not lighting up. What is the problem?

[Brook_Engineer]

I have the white PS3 > PS4 converter. Back of converter says 16 17. Updated to TE with the file name PS3toPS4_TE_V21_201609. Problem is stick converter almost never lights up or works. It lights up in the computer but not in the PS4. To fix this a couple times I updated again even though I was already updated. Sometimes that helps but usually not. When it works, it will work fine until I turn off the PS4 then goes back to not lighting up. What is the problem?

what about you just plug the converter into console without controller?

[BadIntent]

I have the white PS3 > PS4 converter. Back of converter says 16 17. Updated to TE with the file name PS3toPS4_TE_V21_201609. Problem is stick converter almost never lights up or works. It lights up in the computer but not in the PS4. To fix this a couple times I updated again even though I was already updated. Sometimes that helps but usually not. When it works, it will work fine until I turn off the PS4 then goes back to not lighting up. What is the problem?

what about you just plug the converter into console without controller?

still doesn’t light up. lights up in computer, but not PS4

EDIT: think I got the issue. PS4 USB port has lots of use. I wasn’t getting the converter to “click” in every time. Thanks for fast response!

[Ouroborus]

Does the PS3 and PS3/PS4 to PS4 converter work with the madcatz TE1 and madcatz SE?

[GOGO.Zippy]

Does the PS3 and PS3/PS4 to PS4 converter work with the madcatz TE1 and madcatz SE?

@Ouroborus
Yes…

[GOGO.Zippy]

Hi All Guys.

We are fine with Sony’s 4.01 firmware update today.
No firmware update needed for Brook products

Best Regards.
GOGO.Zippy

[Project_6]

Has anyone tested it yet?

[ryuuzaki_l10001]

Hi. I currently have the xbox360/xb1 to ps4 converter and it keeps timing out after 8 minutes of being used. I’ve tried updating but the program just freezes during the process. Is there something im missing here or doing wrong?

1. make sure you downloaded the correct file
2. don’t connect your controller to the converter for update

Which is the current update file? When i start up the update it says ver.2.2 and i kept the controller unplugged the whole time.

[Brook_Engineer]

Hi. I currently have the xbox360/xb1 to ps4 converter and it keeps timing out after 8 minutes of being used. I’ve tried updating but the program just freezes during the process. Is there something im missing here or doing wrong?

1. make sure you downloaded the correct file
2. don’t connect your controller to the converter for update

Which is the current update file? When i start up the update it says ver.2.2 and i kept the controller unplugged the whole time.

XBOX360XBOXONEtoPS4_V22_201609

[Tofu_Warrior]

Firmware 2016-09 is working ok on my PS3->PS4 adapter

1. Uninstall the zero labs driver:
   Devices and Printers > Wired PS4 Controller > Click on “Zero Labs Driver” in the list to highlight it > “Properties” button > “Driver” tab > “Uninstall” button

If the “Uninstall” button is greyed out, try the “Change settings” button in the “General” tab after clicking on the “Properties” button.

2. Upgrade to the older firmware (2016-06) as mentioned above. I used the TE version.
   https://drive.google.com/open?id=0BwtgEPo0y7_OSm1TcFMyeS12MFU

3. Upgrade using the 2016-09 drivers. As well, I used the TE version.

This last step is very buggy. I only gotten it to work after 4 attempts. It would freeze or flicker, and I would have to close the program and try again. I remember inserting the adapter between 2 different USB slots or forgetting my arcade stick or ps3 gamepad connected in the adapter during the 2016-09 update attempts which may contributed to the 5th attempt working

After trying everything else under the sun, this is the only thing that worked. Thank you so much, this process was driving me crazy.

[Tari]

I recently tried using my white PS3->PS4 converter for GG:Xrd Revelator or BlazBlue: Central Fiction, and noticed that the game wasn’t reading the [SELECT] button properly. By default, the [SELECT] button is set to reset the stage position in training mode. When holding a direction and pushing the button, the game is supposed to reset the stage to the left/middle/right, depending on the directional input. When using the converter, though, the directional input is ignored.

Expected behavior:

• Resets stage to left/middle/right depending on directional input

Actual behavior:

• Only sets stage to one position and ignores directional input

I’m not sure why this happens. Has anyone else experienced this?