Here’s a post from back in EVO 2010, whereas I took my Tek-case filled with BB’s to the tourney (and it passed, airport security, yay! Although the guy operating the x-ray did take a second look, lol).
In the first few pics you can see the corner of the 24mm Seimitsu in place, but it required some bending of the connectors.
Yes i have 30 mm and 24 mm sanwa buttons with weight slots on mine i had to pop the buttons off to wire them but besides that there is enough space
i dont know if a Neutrik will fit because you need to plug a usb on the outside of it ? i guess it only depends on your usb
Thanks again. The Neutriks holes are toward the middle of the case, not the outside correct?
Thank you sir. Am I assuming that case has the weight slots installed? The case I am having made has a 24mm AND a neutrik on one side and 2 24mm buttons on the other. I’m hoping in that configuration that the neutrik port is on the inside and not the outside. Again, thanks… nice looking case.
Also, my god, the wiring in that case is perfect… please tell me there are instructions for wiring up a toodles board that cleanly out there somewhere?
its J&J super modding D; u cant wire like that unless your a pro and from what i can see there are no weight slots on that case o.o maybe it was just to show you how much space the neutrik takes inside and where
I do not see any Weight Slots.
Do you see any Weight Slots inside?
I don’t remember my Customer having any. :sad:
If there were Weight Slots, they would end at the Bezels.
athong only offers the Neutrik on inside.
No instructions.
You can pay us to wire.
Wow how inspiring. I understand if it’s a trade secret, but where is your favorite place get your wiring supplies?
Can you show me a pic of your LED mod super wiring job. Give me something to aspire to. Mine looks like spaghetti at the moment.
Nevermind you did. It was just so clean I didn’t notice. WOW.
If you have chosen 24mmNeutrik holes for the front, then yes, the Neutrik will be on the inside, toward the name plate.
JDM’s wiring is beyond epic.
I don’t have other pictures of the Green TEK-Case.
Isn’t that the LED wiring itself?
Laugh.
athong, I lost these of mine.
They only got out of protection for these pictures. :sad:
Nooooooo… what happened? 
Seng is gonna be sad too 
Debuting the Designer TEK-Case Series 1-B.
What is so designer about this TEK-Case S1-B?
The design is not printed and sandwiched, but are actually cutouts.
The idea with the cutouts around the Buttons is for lighting.
Using a fluorescent acrylic, it has a natural glow.
Maybe good for people who cannot LED.
This type of Case allows for even cooler design ideas.
So let us see what you guys have!
Click here for new Seimitsu Inserts.
http://shoryuken.com/forum/index.php?posts/6970975/
OK, this is beyond awesome.
Nice hello kitty!
WHERE DO I PUT MY MONEY
Well, there went my plans.