Art's Hobbies - DIY Acrylic Cases

[KeNpunch12]

Measurements can be ascertained from the TEK-CASE templates here:Welcome to Art’s Hobbies However, by filling your artwork into the template properly, you would not need measurements, as this is pre-measured and ready for print and use.

Also, do be sure to read this useful info about submitting artwork properly: Welcome to Art’s Hobbies

Then, purchase an artwork print and cut: Welcome to Art’s Hobbies

As well as an additional 1/16" plexiglass cover for TEK-CASE (Welcome to Art’s Hobbies) used to sandwich the artwork. It will attach to the top of your TEK-CASE, and secure your artwork in place.

Be sure that your when you order artwork and your plexiglass cover that it matches your button configuration of your TEK-CASE and template.

thanks man! I appreciate the info!

[T37_Rampage]

Anybody know where Art bought the colored wire sleeves that he used in his Venom stick? Couldn’t find any on Amazon, maybe I’m just using the wrong keywords.

[Darksakul]

Look for PC Sleeving tubes/ Sleeving kits or sleeving wrap. Usually Sleeving tubes are pretty cheap like a dollar or so per foot.
Look at sites/ suppliers such as FrozenCPU.com or Performance-PCs.com, tubing is bet before you finishing wiring up a stick, while wraps are better after the wiring is done, and you do not want to undo alot of wire.

[T37_Rampage]

Made an order for a custom TE plexi replacement over a day ago and I haven’t gotten a confirmation email yet.

[Maxoplata]

Finally ordered my case (along a good amount of parts from AkihibaraShop & LizardLick). Now just to wait for them all to come in!

[CI581]

they look dope. I might have to get one.

[Darksakul]

Made an order for a custom TE plexi replacement over a day ago and I haven’t gotten a confirmation email yet.

Give it at least 3 days. Art’s Hobbies is a 1 man operation, the guy gets more email in 1 day than most people get Farmville request on Facebook during a week. Also take a look at his site Welcome to Art’s Hobbies read what Art posted their.

Q : I’ve placed my order and I haven’t gotten an update in a few days. What’s my status?
A : You will receive a confirmation within an hour after your payment. That is your confirmation and there will be no further confirmation from me. Please note the estimated date of shipping your items when you’re in the products section (it should be within 10 to 14 days).
You will get shipping confirmation when your item ships. Time may be longer for large etchings.

If you don’t hear anything after 14 days, then email me and I’ll see what’s up.

[T37_Rampage]

Never did get that email.

[Darksakul]

If it been more than 14 days with out a email, you need to email Art.
Make sure you include all information including your order number, you should of have one when you completed your order.
If you paid via Paypal, check your Paypal records. Also double check to see if the email is not in your junk mail box or blocked by a spam filter.

[WinnerStays]

If it been more than 14 days with out a email, you need to email Art.
Make sure you include all information including your order number, you should of have one when you completed your order.
If you paid via Paypal, check your Paypal records. Also double check to see if the email is not in your junk mail box or blocked by a spam filter.

Dark i think what rampage is saying is that he hasnt gotten the confirmation email yet. in which case he wouldnt have an order number i presume. Confirmation emails are kind of like “Auto pilot” at least in my experiences.

Rampage you might want to check your paypal to see if your charge went through.

[T37_Rampage]

You’re right, no order number. It did go through paypal.

[d3v]

I believe that it’s only right that I post about Project: International Slumber here seeing as it’s probably one of the biggest, most complex, Series-1 TEK builds out there.

Spenzalii’s original forum post.

D3Vlicious - Custom Arcade Stick Art - Project: International Slumber - the?art.

[cheese619]

Hey Art, I completely understand if you can’t answer this question but would you know if the custom panel builder will be available on your TEK-CASES within the next 6 months.

[wminor]

Man these cases look dope as hell!

Anyone else in the UK want to get involved in a group order? If we get two or three at the same time we’ll save ALOT on shipping costs!

I would just buy three myself but I can’t really front that kinda cash at the moment.

PM me if interested… I’m based in London by the way (not that that really matters so much)

[Ultra_Optimus]

Is Art out for the holidays right now?

[Nerrage]

Nah, he’s been filling orders as far as I know. My friend got his plexi cover about a week ago just fine.

[NaTSuMi]

plexi color gallery

I looked through the website but couldn’t find any page with pictures of the different plexi color options? Does one exists?

Is it possible to get a pink color?

Thanks.

[zeththedarkmage]

I looked through the website but couldn’t find any page with pictures of the different plexi color options? Does one exists?

Is it possible to get a pink color?

Thanks.

Welcome to Art’s Hobbies

[Svenuser]

Some of the screws for my bottom panel don’t fit the diamond joints, they slip straight through and now I can’t screw in the panel all the way
I think maybe the threading might have been stripped or something. But they were like this right out of the packaging, so I’m not sure what could have caused that. Are there replacement diamond joints available?

[sswizzbbeatss]

Could i bring this to like casuals without the fear of it getting broken. or Like bringing it to a tourny?