Are we going to see a snap in version available again? Gummowned is out of v1.
The plexi sticks are the best to do light mods with, and snap ins are better off.
You can take a look on my post. I put AE2 on my snap ins. Just that you’ll need to do some shaving .
Probably not… There just isnt enough demand to justify the cost of making a new version… I’ve put Sait0u’s pics in the 3rd post of the thread so you can see how he modified the buttons to fit AE2
My latest Voltech w/ Sparky PWM & ArcEye2
[COLOR=#71c0ee]http://forums.shoryuken.com/t/check-out-my-new-arcade-stick-no-image-quoting/73936/18698[/COLOR]
Very nice!
It looks like the Canada Post strike will not affect shipments! Yay!
+1
nice work!
Dear PurpleArms,
What is the current price for a set of 8, fully assembled Arc-Eye-2 LED’s with ribbon cables?
**Taking Pre-Orders!!! Rollie LED Translucent Pushbuttons Plug and Play NO MODDING!!! Rollie is matching up the 30mm Translucent Pushbuttons with the ArcEye 2 LED Board.
Wiring Harness Included. $7.95 ea. **
Purplearms, thanks for the space!!!
Ponyboy
Its on the first page
$5x each button plus $8 shipping
so $5x8+$8= !!!
no prob… i can put this in the first post… should i link to a thread or to your site?
@purplearms
ty for all the hard work! I have a question though, when someone buys ArcEye 2’s and a sparky from ya…are the wires for the sparky included (specifically the vcc and gnd for the sparky and the 8 button signal wires) or should we get our own wire?
Subquestion: if we get our own wire should we go with 22 or 24 gauge?
The wires will be provided by PurpleArms when getting AE2. Sparky is separated but they both will combine shipping.
Thanks!
I’m just the led guy… 32teeth’s office is close to mine, and he pass things for to me to ship with AE2 to help you guys save money…
Depending on how you are using sparky, you may want to consider a small spool of wire…
I normally work with 22 gauge solid core wire… much easier to work with, although not as flexible as stranded wire… but 22-24 gauge is fine…
Just received the ArcEye2s today. Thanks PA! And thanks for the stickers and those cards 
Awesome! ty…rather than pay by the foot or by the spool, I think I’m going to disassemble some broken down electronics for better color selection xD
I’m glad they arrived finally… Good luck with your install!!
Purplearms, if you do not mind please link to the thread and web site.
Thanks,
Ponyboy
I had no problems installing them and have it wired up correctly but having problems with the Sparky Jr PWM. It lite up the start up buttons and then it wouldn’t light up. I gotta figure out what’s wrong when I get home from work. I tried both Sparky Jr PWM that I have on hand and one of them lite up two K buttons K1 and K2 and stayed lite when it’s connected to the PC but when I plugged it into my PS3 it wouldn’t light up. I’m wondering if anyone else have the same problem. I have it hooked up on my custom stick on a MC Cthulhu.
Can you post it here, then i’ll put it in post #1. I don’t have the links.