@32teeth: all sparky will be ordered from your site correct? After placing an order with color configuration and if we want pin heads or screw terminals (I’m assuming just pin heads) will needed to be note on the checkout?
No No No sorry for the confusion…i was not asking if there was going to be an installations video or not. what i was trying to ask was which installation version of sparky jr pwm were you going to be “tutorialing” or using to install the arc eye 2’ in your video? the one with headers, screw terminals, or both?
I just checked ‘screw terminals’ on the order form and noted in the paypal comments section that i wanted headers.
Oh i’ll cover the screw terminals… its literally the same process… just screwing down a wire instead of plugging it in… i’ll explain it in the video
Quick question, how long are the wires going to sparky from the arceyes going to be?
those arceye v2s are so hot. i need a pants change LOL. i will try to mod this mvc3 stick asap and post a vid and maybe a little timeline/instructional if no one beats me to the punch using the sparky pwm
Would be appreciated!
450mm… plenty long
your tutorial would be very welcome and i’ll put it up on the site and in the first few posts, regardless of what i or others may do =D
Looking forward to some LED goodness! I found my self staring at this picture and is that some sort of reflector sleeve you got in there or something to keep from the light spilling out through the button or maybe Im crazy lol. I was actually of thinking of doing something similar to this and didnt know how to go about it.
I think you’re seeing things lol… to the contrary, you want light to hit the sides of the button and illuminate the ring
Haha second look and it’s how the picture was taken… Lol thanks for the heads up on that 
Hi guys, Im a proud owner of a TeasyStrike-S and I have a FGWidget, but the KNserts at lizardlick are out of stock. my buttons are all seimitsu screw in translucent blue, can i just hookup the blue line with the arceye2’s and use them instead? I havent soldered the resistors on the fgwidget yet either.
well i know i owe 32teeth one for the sparky and with the sparky pvm i have i can def do the arceye v2 with it but sadly it will be with a McCthulhu so the insides will be a bit clustered
people have made arceye1 work with fgwidget, so arceye2 should be compatible… … i’ve never touched one before though, so i cant offer much help… i believe butteroj could offer some advice…
man thas a lot of A-Es! I hope they last a while, may not be able to grab some for a minute…
but yo congrats! everything has come together very nicely! that pic of the AE set in the clear buttons is pure tech bueaty
Ok now everyone go program some crazy shit on your sparkies 
Thanks! Pre-sales have been satisfactory so far. About 1/3 of my entire stock is sold out. =D
In other news, i just ordered a crapload of cardboard boxes for shipping. Should be here by Monday. 32teeth is updating his sparky website so that orders can be placed there for both sparky and arceye2. I will be sending out instructions to pre-orderer customers on how to get a sparky and combine shipping with their arceye2 pre-order.
Very interested in this method. He must be working on it right now.
Preorders will just continue from there… and people who have already preordered and need sparky can order from there as well (you get charged $5 for shipping but you will be refunded $5)… 32teeth is hard at work on it, so we’ll announce it as soon as its ready…
Doesnt have to be. Heres my wip, just waiting on ae’s before I wire the rest.
