Anyone have used this actuator in hori stick hayabusa?
I used the black derlin version, not the anodized brass colored Aluminum actuator.
But it should act simular to how it works in a JLF.
Could Fits a Eurojoystick in Hori Real Arcade Pro IV Hayabusa?
What size need to fight a Eurojoystick or I.L magnetick stick?
I think that be the most likely result given how similar the Sanwa JLF is to the Hayabusa
I would go with the smaller Red Actuator.
will this pad work with the pc version of sfv with an inpin converter? https://www.ebay.ca/itm/x1-Street-Fighter-15th-Anniversary-Controller-Chun-Li-Playstation-2-Officially/193242081652?hash=item2cfe202974:g:3d8AAOSwiTZd6InL
You are asking about some old school stuff here.
I think there a very good chance that these two, the inpin and the Street Fighter 15th Anniversary pad would work with each other and the PC.
Although it will not work with the PC version of Street Fighter 5 as the PC version game requires Directx Xinput compliant controllers
1 Like
If you have a ps2 to ps4 adapter from brooks. Yes.
If you need it to work on PC, get X360ce.
1 Like
âȘAnyone ever had trouble connecting FGC fightstick PCBs to an SCPH-90006 Slim PlayStation2? I tried both the Akishop PS360+ and the MC Cthulhu with no success.âŹ
Cant say that I have
Updated the firmware on my PS360+ and even tried the whole forcing PSX mode (holding K1 on plug-in/start-up). Still no luck.
Gonna try to find my old PS1 or PS2 Phat to confirm. I did test and had no issues running the boards/cables through a FGW Converter, so at least itâs working in some instances.
1 Like
So figured out what was wrong with my PS2 situation. Turns out, the MCC and PS360+ are just fine.
I brought home (from my parentsâ house) my old OG PS2 Phat; no problems with Capcom vs SNK 2. Then inserted the original game that I was trying to play (Tales of Legendia), and it didnât work on the PS2 Phat.
Popped in another Japanese game into my PS2 Slim (Godannar), and the PS360+ worked just fine. Popped back in Tales of Legendia, no dice.
So itâs just Tales of Legendia who doesnât like the MCC/PS360+. Really shouldâve run this test (ie, using a different game) beforehand before lugging home and hooking up a whole separate console. 
1 Like
Iâm considering putting a Brook UFB into my Hori stick, but the RAP model I have has the PS button on the side along with Share/L3/R3. What can you guys suggest be done about wiring that panel up?
Could put LS-56 in HRAP IV with MS-plate?
I think so, (it been a while)
but you have to mount the plate sideways only use the center screw hole and only have 2 screws holding the plate in. You also need to rotate the PCB.
Sup folks. I have a question about adding custom art to a Hori Fighting Edge.
Iâm looking at this custom plexi cover, but looking at the listing and pictures Iâm a little confused as to how you apply it to the stick or what it looks like once installed.
https://focusattack.com/custom-etch-plexi-cover-for-hori-2017-fighting-edge-ps4-model/
My knowledge on opening up sticks and modifying is them is limited, so maybe this is a dumb question, but Iâm mainly just wondering how this thing works. Does it replace the metal finish on the default stick? Does it just go over it? Any kind of information would be great, Iâm trying to figure out whether I should order one of these now so itâll be here on time with the stick.
Thanks in advance.
Anyone have a recommendation for printing custom artwork? I had mine originally print and cut by Art at Tek-Innovations, but he went out of business last year. I donât want to go to a generic printing shop like say Staples either. Itâs a custom cut as the button holes were also cut out by laser so that I could use said artwork in Sanwa push buttons. Iâd prefer that because I donât trust myself with an exacting knife to cut precise circles.
I know of focus attack, but when I was dealing with them originally almost three years ago, it didnât seem that they had the template panel that I had. Itâs why I picked Tek-Innovations instead. I have an OEM Madcatz Type N panel that you can use for the TE2 and TE2+. Because there are many custom panels made that arenât identical to the Madcatz panel, so it wouldnât help me to buy the wrong plexi and artwork cut.
It has been three years, but I canât find anything on FAâs website on mobile. I also asked them on twitter. Unless there are other places to recommend. I still have all the original art files and even the templates that Art Hong provided too.
Pretty much now since Art went outta business, itâs mostly FA thatâs taken on customers. Szaboâs also does art as well, and may be able to put that together for you. The website for that is https://www.szabosarcades.com/collections/fight-stick
1 Like
That guy is offering a template for Jasenâs panel which iirc is not like the actual OEM panel. Iâm not asking for a new panel or new plexi even, I just want a convenient place to reprint my artwork with precut holes.
Time to jump in the time machine and see if anyone here still exists from around the MC Cthulhu era.
I found an MCC unopened in a box in my garage, still sealed in the anti-static packaging. I want to make sure the firmware is set to the last known version, but it looks like all of Toodlesâ site is unavailable to download anything and any of the tutorials to flash arenât showing up with my Googling and web.archive-ing.
I do remember purchasing it before Toodles had Dreamcast compatibility with the MCC, and thatâs the only thing I want to check for. Iâd much rather not buy a new Brook board or similar if I have something perfectly good here.
Anyone have the latest firmware and utility to flash?
EDIT: answered my own question when I did a bit more digging.
Hi guys, since the padhack thread seems dead for years, I want to put my questions here.
I just bought a mortal kombat pdp pad for ps4 and planning to turn it into a hitbox with cherry mx switches, no dual mod intended. So, is there any diode, cathode, inverter thingy needed to get it right? I just need it to be able to play on ps4
